Supercharged 4.900” Bore Space Hemi Engine
Building upon its 4.800″ bore space Hemi engine platform, Noonan Race Engineering made improvements to its 4.900″ bore space Hemi engine to the point that its now one of the engine shop’s bread and butter builds. Don’t let that fool you – this engine is packed with unique features and the performance to back it all up. Check it out.
5.3L LS Engine
Tony Paladino’s shop, Concord Engines, has been serving the Kannapolis, NC area with engine rebuilding and machining services since 2014. One engine platform they specialize in is the LS, and it is offered in three different power levels and configurations. Check it out!.
Naturally Aspirated 598 cid Big Block Chevy Engine
Pete and Jake Gibbons of Gibbons Motorsports are constantly cranking out high-quality engine builds. Occasionally, they get to build an engine for themselves, such as this 900 horsepower, 598 cubic inch, big block Chevy engine. Check out this naturally aspirated beast!
King Bearings Introduces Stacey Stone as Technical Sales Specialist
King Engine Bearings is delighted to announce the addition of Stacey Stone to its team. As a technical sales specialist, Stacey will handle sales support, customer training, and business development. Stacey Stone brings a wealth of experience and expertise in the powertrain industry, specifically focused on engine parts. With over two decades of involvement in
2,600 HP ProCharged 540 cid Big Block Chevy Engine
BB&T Racing in South Haven, MS has been building high-performance domestic engines for 30 years. One of their latest builds is for a drag racing customer looking to go faster utilizing an F3 ProCharger. Check out this 2,600 hp ProCharged 540 big block Chevy engine!
Calico CT-1 Coated Bearings
CT-1 is specifically engineered to withstand the extreme conditions of today’s high-performance engines.
Rebuilding Chevrolet’s Gen VI Big Block Engine
Following Chevy’s introduction of its popular small block V8 in 1955, the OEM needed something larger to power its medium-duty trucks and the heavier cars that were
on the drawing board at the time. Enter the big block!
468 cid Big Block Chevy Engine
Kevin Willms has owned this 1930 Ford Roadster since the age of 17. He’s now 62 and getting into the drag-and-drive scene with the roadster and its 468 cid big block Chevy engine. Check it out!
Naturally Aspirated 632 cid Big Block Chevy Engine
Jerry Sweet’s 1976 Nova has been owned by his family for a long time. Despite it changing hands briefly, it it is once again Jerry’s, and he’s using it to its full potential with plenty of miles on the street and countless hours at the track, all thanks to a badass, naturally aspirated 632 cid big block Chevy engine built by Robbins Racecraft Inc.
Single-Turbo LBZ Duramax Engine
This LBZ Duramax came from a donor truck Josh Kaye had purchased at an auction. After bringing it home, he tore everything apart and started building it back to the 850-horsepower state it sits at currently. Check it out!
Heavy-Duty Diesel Engines, Equipment and Replacement Parts
Relying on OE manufacturers like Caterpillar, Cummins, Detroit Diesel and Waukesha has always been an option, but diesel equipment owners are now more than ever seeking the aftermarket as a more viable solution for replacement parts.
The Engine Cummins Never Built: A Look at the 6.4L Cummins
With increased technology in turbo systems as well as fuel systems, the final limits of the 6.4L Cummins have not yet been discovered. These engines are capable of being a competitor in any event, whether it be truck pulling, drag racing, or cruising the strip.
Top Fuel and Funny Car Engines
They’re the pinnacle of drag racing, and the engine builders, crew chiefs and teams who make these cars function at peak performance all season long are looking at every single area of the engine and the car to make it down the track as fast as possible.
Solving Engine Bearing Fatigue Failures with Silver Based Materials
One of the most important engine bearing properties is fatigue strength. Fatigue cracks start on the surface and then penetrate into the material. All layers of a multilayer bearing material must have fatigue strength that is greater than the actual load applied to the bearing. Engine bearings must work in a fully hydrodynamic oil film
Twin-Turbo 5.0L Coyote Engine
Brett LaSala’s first ever Sick Week in his 2012 Mustang named Snot Rocket was a huge success thanks to a new personal best ET, a class win in Modified, 3rd place overall and ‘Quickest Ford’ honors. It’s all thanks to a 2,500-horsepower, twin-turbo, 5.0L Coyote engine built by Fast Forward Race Engines. Check it out!
Nitrous-Powered 7.3L Ford Godzilla Engine
Looking to push the limits of a production Ford Godzilla engine, Paul Svinicki of Paul’s High Performance stuck the engine in his 2010 Cobra Jet, added some better components and some nitrous. Check out the result!
Blown 526 4.900” Chevy/Hemi Engine
Not all engines are created equal! Just check out this blown 526 4.900″ Chevy Hemi engine built by Nick Bacalis of Bullet Racing Engines for a Pro Mod application. This engine’s bells and whistles help it make 3,500 horsepower!
1,700-HP Supercharged Suzuki-Based Top Fuel Motorcycle Engine
Making a 1/4-mile pass in 5.50 seconds at nearly 270 mph requires zero mistakes by both the racer and the crew. That ET is the current Top Fuel motorcycle world record belonging to Larry “Spider-Man” McBride. We got to speak with him and learn more about his 1,700-hp supercharged Suzuki-based Top Fuel motorcycle engine.
ACL Hemi Late-Model Main Bearings
ACL has announced the release of the Hemi V8 Late Model RACE Series Performance main bearings.
422 cid Small Block Chevy Circle Track Engine
We were treated to a shop tour of Terry’s Machine Shop by owner Todd Gilliam. This old-school machine shop outside of St. Louis does a little bit of everything, and they had just wrapped up this badass 422 cubic inch small block Chevy engine for a circle track customer. Check it out!
