You searched for Holley - Page 9 of 25 - Engine Builder Magazine
Holley Tri-Power Intake Manifold and Carburetor Systems for Small Block Chevys

Holley has announced the release of Tri-Power intake manifold and carburetor systems for small block Chevy engines. The Holley Tri-Power Carburetor System is well-known in Chevrolet circles. It was factory equipment under the hood of the legendary big block L71 and L89 Corvettes.

Holley Ultra XP 2bbl Carburetor for E85 Fuel

Holley’s Ultra XP 2bbl carburetor designed for E85 fuel continues to improve upon the original 0-4412 2bbl that has been successful on circle tracks for decades. It has an abundance of new features and improvements starting with the aluminum construction for a 50 percent weight savings when compared to the zinc version.

Holley Vent Tube Spill Reduction Valves

Holley has announced the availability of a new safety item – Vent Tube Spill Reduction Valves. They feature an internal valve ball that reduces fuel spillage from carburetor vent tubes.

Holley Updates HP and Dominator Fuel Pump Lines

Holley has updated its HP & Dominator fuel pump lines. Holley engineers have designed these pumps to feature improved hot fuel handling capabilities which greatly reduce the negative effects of heated fuel now common with many of today’s pump gas blends. These pumps are compatible with pump gas or race gas.

Holley EFI to Power Ridetech’s 48-Hour Corvette

A typical eBay purchased 1972 Corvette will roll into the 48-Hour build center to be transformed into a fully equipped track monster. The build will feature Holley EFI, Hooker Headers, and Earl’s Performance Plumbing. In addition to live wrenching, manufacturer-specific question & answer sessions and interviews will be held throughout.

Holley EFI Harnesses for Ford Coyote and Mod Motors

Holley has announced the release of plug & play EFI harnesses to use Holley EFI on Ford Coyote and Mod Motor platforms. Holley’s plug & play harnesses plug right into your factory sensors, including crank, cam, TPS, coolant, and much more.

Holley Gen III HEMI EFI Harnesses

Holley has announced the release of plug-and-play wiring harnesses to use its HP and Dominator EFI systems with Gen III HEMI engines, including the ’03-’10 5.7 & 6.1L, ’11-present 6.4L “392”, and Gen III 426 crate engines. These Holley EFI harnesses provide a plug-and-play solution for the main, injector, ignition coil, and drive-by-wire harnesses needed to fire up your Gen III HEMI with Holley EFI control.

Holley Carbon Black Intake Manifolds

Holley has introduced a new ceramic coating to match the subdued engine bays that have become so popular. Polished aluminum or chrome isn’t the answer for everyone, so Holley came up with the Carbon Black coating for its intake manifolds.

Holley EFI Digital Dash

The Holley EFI Digital Dash features plug-and-play compatibility with all Holley EFI systems via a CANbus connection. The compact unit features a 7″ low glare, high brightness, high contrast, full color touch screen for easy viewing, even in full sunlight. The screen provides nearly limitless customization.

Holley Carbureted Dual Plane Intake

Holley has announced its all new carbureted dual plane intake for the popular GM LS engine. This intake allows you to bolt your favorite 4150 flange carburetor onto an LS engine.

5th Annual Holley LS Fest Grand Champion Results

The 2014 LS Fest, held September 5-7, was the 5th annual and by far the largest incarnation of the event yet with over 10,000 in attendance and over 500 participating LS-powered cars. Congratulations are in order for all of the participants who had the chance to enjoy and contribute to the event. Even bigger congratulations

Holley EFI to Power 2015 ARCA Racing Teams

Holley has announced that the Automobile Racing Club of America (ARCA) has selected Holley EFI to power the new ARCA Ilmor 396 engine recently introduced for the ARCA Racing Series presented by Menards 2015 stock car racing season. ARCA introduced the new engine on Friday, August 1, 2014 as an option for teams in an effort to address

Holley Sponsors NCM Motorsports Park Control Tower

Holley Performance has announced a new partnership with the NCM (National Corvette Museum) Motorsports Park, and is sponsoring the Park’s Control Tower and Event Center in Bowling Green, KY. “It is only fitting that two great American motorsport brands like Corvette and Holley unite with our sponsorship of the NCM Motorsports Park,” said Trevor Wiggins, Holley

Holley Diesel Nitrous System

If you think the torque of that monster diesel is something to brag about, then you should feel it with the extra power of NOS from Holley. This kit p/n 02519NOS, fits all diesel applications and works well with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid

Jason Bruce Rejoins Holley as VP of Business Development

Holley Performance Products has announced that Jason Bruce has rejoined Holley as Vice President of Business Development. Jason is an industry veteran holding sales and marketing management positions with aFe Power, Street Scene Equipment, Holley, and Hooker Headers. In this new role, Jason will be responsible for developing and coordinating new business projects across the

Holley Performance Accessory Drive Kits for GM LS Engines

Holley Performance Products has announced complete accessory drive kits for GM LS engines. Holley’s LS accessory drive brackets make LS swaps much easier. Now Holley has made it even simpler by offering complete kits with brackets, plus pulleys and accessories. They use only the highest quality components from suppliers like Gates, Dayco, Bando, Sanden, Four Seasons

Two Barrel Ultra Holley Performance Carburetor

Holley 2 barrel carburetors have been a mainstay in oval track racing for decades, but racers always want more.  They want more tuning ability, more durability, more weight savings and more features, so Holley listened and designed the all new Ultra HP 2 barrel carburetor. The new carb delivers the proven results of the Ultra HP

Holley Front Clearance Oil Pan

Holley’s original LS Retro-Fit oil pan has been popular, and this new pan (P/N 302-2) has all the same attributes plus a redesigned front to give additional clearance.  It provides maximum clearance for vehicles where the steering linkage is behind the engine crossmember.  Like the original, these factory-style cast aluminum pans use factory gaskets, filter

2014 Marks 5th Annual Holley LS Fest

Holley has announced September 5-7, 2014 are the official dates for the 5th annual Holley LS Fest. Once again Beech Bend Raceway in Bowling Green, Kentucky will host the largest all-LS celebration in the country. 2013 saw record numbers of both participants and spectators and there was already excitement in the air about 2014 being

Danny Popp Wins Goodguys Autocrosser of the Year with Holley EFI

Autocross champion Danny Popp piloted his Holley equipped 1972 Corvette to win the Goodguys Autocrosser of the Year. The finals were held at the Goodguys Southwest Nationals Event in Scottsdale, AZ, November 15th -17th, 2013. The ’72 Corvette has been in the Popp family for quite some time, but Popp has modified it for autocross