You searched for Chevy - Page 8 of 67 - Engine Builder Magazine
588 Big Block Chevy Marine Engines

Hameetman Racing Engines (HRE) in Cape Coral, FL, has a customer located in South Africa with two 50-foot Nortech Cat boats the shop has serviced for years. The boats each house four engines, and this time around, due to saltwater damage and years of use, all eight engines needed to be replaced.

Twin-Turbo 540 cid Big Block Chevy Engine

Arguably one of the coolest engine builds Hustler Race Engines has done since opening its doors a little more than two years ago, this twin-turbo 540 cubic inch big block Chevy engine should produce close to 3,000 HP. The engine’s vehicle and application are being kept under wraps – for now.

JE Pistons’ 20° Big Block Chevy Pistons

Forged in-house from 2618-T6 aluminum, they incorporate many special features that elevate these new 20° pistons above the norm.

ARP Head Stud Kits for Big Block Chevy

Manufactured from premium grade 8740 steel and heat-treated to 190,000 psi tensile strength, they are ideally suited for many engine combinations.

1970s LT1 Chevy Street Engine

The market is flooded with LS and LT engines these days, but you don’t see many LT1 engines from the 1970s anymore. That is, unless you’re Jason Ore of 955 Automotive, who recently rebuilt this ’70s LT1 for a 1965 Corvette Street application. See what went into it!

383 Small Block Chevy Engine

As part of a full restoration of an original ’73 Z/28 Camaro, Robbie Capps, owner of Capps Performance Engineering, built this 383 small block Chevy engine to make the car really come alive. We dive into the details of the high-end build in this Engine of the Week.

Roots Blown 540 cid Big Block Chevy Engine

With a focus on early generation small block and big block Chevy builds, David Coté of Hilltoppers Speed Shop particularly enjoys building roots-blown big block Chevy street engines. Who can blame him? Just check out this roots blown 540 cid big block Chevy the shop recently built for a street rod.

452 cid SB2 Small Block Chevy Engine

The best engine builds are always the custom ones, like Gibbons Motorsports’ recent build of a 452 cid SB2 small block Chevy engine for a drag race customer. Get the details in this episode of Engine of the Week.

383 cid Small Block Chevy Engine

As part of a full restoration of an original ’73 Z/28 Camaro, Robbie Capps of Capps Performance Engineering built this 383 cid small block Chevy engine to make the car really come alive. Find out what went into the high-end build.

612 cid Blown Big Block Chevy Engine

Looking for the ultimate in reliability and durability on 93 octane, Hardcore Horsepower built this 612 cid big block Chevy engine with a 10-71 blower and Fast EFI to the tune of 1,000 horsepower. Find out what else went into this build.

452 cid SB2 Small Block Chevy Engine

Using all the best of the best engine components, this 452 cid small block Chevy engine is one of Gibbons Motorsports more intense custom engine builds. Did we mention it also has nitrous? Find out what went into the build!

Edelbrock-Musi 555 cid Big Block Chevy

Pat Musi Racing Engines, in conjunction with Edelbrock, recently announced they’d be building a series of 555 cid big block Chevy engines, which are much more attainable than Musi’s typical drag race set ups for PDRA or NHRA. The engine, being called the Edelbrock-Musi 555, comes in three different configurations. Find out what goes into these high-horsepower engines.

Mahle Small Block Chevy Flat Top PowerPak Plus Piston Kit

With CNC machined pin bores, ultra-flat ring grooves for the best possible ring seal and a slipper skirt forging and proprietary phosphate and GRAFAL anti-friction skirt coating, the 305ci flat top PowerPak Piston Kit provides a competitive edge for budget minded engine builders.

582 cid Big Block Chevy

Striving to build the fastest of the fast and best of the best, this ’99 Trans Am project car was no exception for Legend Racing Ent. The shop replaced the car’s old LS and put in this new 582 cid big block Chevy. Find out what went into the build!

598 cid Big Block Chevy SR 20 Engine

The folks at Wilson Race Engines, LLC specialize in big block Chevy SR 20 engines, and build them for reliability and durability. The shop recently rebuilt this 598 cid SR 20 engine with updated cylinder head porting and manifold CNC work to make it even faster. Find out what went into this build!

MAHLE Motorsport’s Big Block Chevy 632 Forged PowerPak Piston Kit

This shelf-stock piston kit is forged from 2618 alloy for increased high temperature strength and durability. They are dual coated with phosphate and MAHLE’s GRAFAL skirt coating for reduced drag and wear.

MAHLE Motorsport Small Block Chevy 327 Dome All Forged PowerPak Piston Kit

MAHLE Motorsport now offers a cost-effective way to modify any 327 Small Block Chevy engine for more power with the introduction of its new all-forged dome 327 SBC PowerPak Piston Kit.  This shelf-stock piston kit, available wherever MAHLE Motorsport pistons are sold, provides everything needed to replace factory installed pistons in a 327cid SBC engine. The

Moroso SB Chevy Valve Covers with Oilers

These valve covers are fabricated aluminum welded to a one-piece billet rail that is machined to ensure a precision flat surface for superior sealing.

Turbocharged Gen V 454 cid Big Block Chevy

After building more than 700 engines in his career, Joshua Gomez of MotorVation Performance, wanted to build himself an engine that was affordable, fast and stayed together. He hot rodded this 454 cid Gen V big block Chevy to the tune of 1,800 horsepower. Find out what went into the build!

Holley Mid-Mount Accessory Drives for Chevys

Holley’s Mid-Mount accessory drives are now available for your small block and big block Chevy engines. The system does what no other accessory bracket system has done… gets rid of the brackets.