You searched for Engine Pro - Page 288 of 368 - Engine Builder Magazine
Qualcast Announces its 2015 Performance Catalog

The QualFast 2015 catalog, including performance valves and valve train components, is now available in print. The 2015 performance catalog introduces a brand new racing valve series called Black Lightning. Black Lightning valves feature nitrided stems, combined with swirl-polished underheads, undercut valve stems, and thinner margins for the most demanding pro race engine environments.

Ford 4.6/5.4L 3V Start-Up Noise

Some Ford vehicles equipped with a 4.6L 3-valve or 5.4L 3-valve engine may exhibit a ticking and/or knocking noise after reaching normal operating temperature, or a rattle upon starting. The noise may be described as ticks, taps, knocks, or thumps. In some cases the noise may be a normal characteristic of these engines. In other cases the noise may require further investigation.

Porsche’s 918 Spyder eAxle System

Part of what makes the 918 Spyder so revolutionary is its hybrid and plugin capability, which enables performance not attainable from a normal setup. The highly advanced eAxle system used on the 918 Spyder was developed in conjunction with Swedish firm and drivetrain industry leader GKN. The eAxle that supplements the 918 Spyder’s hybridized 4.6-liter V8 is an evolution of the company’s innovative eAxle drive.

Hypermax Intercooler System

A factory intercooler system is adequate to only 300 horsepower. After this power level, the cooler and piping cannot handle the additional cooling demands of high performance engines. The proprietary design of the Hypermax intercooler is significantly more efficient, utilizing a taper sided core to maximize flow capacity within the confines of the vehicle.

Fuelab 585xx Series Fuel Pressure Regulators

Fuelab has announced its latest development in superior fuel pressure regulator performance and reliability. Fuelab 585xx Series Fuel Pressure Regulators combine advanced features and increased functionality to provide the ultimate precision instrument for fuel pressure regulation.

Quicktime High Performance Modular Flexplates

QuickTime, a leading manufacturer of high performance drivetrain and bellhousing products, has announced it launched its all-new Modular Flexplate (patent pending) for a wide variety of engines, including small and big-block Chevrolet and Ford. Each application is designed to handle the stresses of high horsepower, high rpm engines.

Edelbrock Performer RPM LS3 Intake Manifold

The Edelbrock Performer RPM LS3 intake manifold (#71197) is designed for use with Gen IV LS engines equipped with LS3, L92 and L76 rectangular port cylinder heads. The Performer RPM LS3 is ideal for anybody looking to build a carbureted LS2 or LS3 engine in the 1,500 – 6,500 rpm operating range.

Maradyne High Performance Fans 2015 Catalog

The 2015 Maradyne High Performance Fans catalog provides a complete overview of the extensive line of electric cooling fans and heating units available for a wide range of vehicles including classics, muscle cars and hot rods, as well as pickup trucks, vans and SUVs. Designed for both early and late model vehicles, Maradyne’s universal fit electric fan products increase engine cooling and horsepower.

Gasket Headlock Header Bolts

ACCEL Performance Group, a performance auto parts manufacturer of brands including Mr. Gasket, ACCEL, ACCEL Motorcycle, Hays, Lakewood, QuickTime and Prestolite ProConnect, have introduced its latest innovation for automotive enthusiasts and racers,Mr. Gasket HeadLock Header Bolts. Mr. Gasket’s HeadLock header bolts eliminate the need for lock washers when installing header exhaust.

Magnum Gaskets Now Covers Overhead Valve V8s

With the recent introduction of the Magnum Performance Gaskets line, the MSI brand now covers “all three lives” of the classic overhead valve V8’s from GM, Ford and Chrysler. Magnum maintains a “USA First” policy that gives priority to manufacturing and sourcing parts and materials in North America.

Ford EcoBoost Challenge Returns in 2015

Ford Motor Company is once again giving fans and potential customers in 17 cities across America a chance to get behind the wheel of its latest products, with its third EcoBoost Challenge consumer drive tour launching next month. EcoBoost Challenge will provide five unique drive experiences in Ford products. This year, participants will have an opportunity to win an EcoBoost-powered 2015 Ford Edge.

Allstar Performance Billet Aluminum Swivel Water Neck and Spacer

Allstar Performance black anodized billet aluminum water neck fit most Chevy V8 engines and accepts most standard thermostats and swivel a full 360 degree to simplify connection of LH and RH radiator hose to engine. Black anodized finish helps protect against corrosion. Stainless steel hardware and an o-ring sealing base flange assure a tight seal for a gasket-free installation.

Understanding Today’s Bearing Clearance Recipe

What’s needed to keep the rotating assembly rotating? It’s a recipe that includes three key ingredients: the bearing, the crankshaft and the oil. But understanding the part each plays as part of this recipe is what’s needed to keep your engines’ bearings from failing.

Centerforce 1,700 lb. ft. Rated Diesel Twin Clutch for Cummins-equipped Rams

The Centerforce Diesel Twin uses two sprung hub discs with a patented floater design that uses spring-loaded bushings to absorb typical “floater rattle.” The floater is drilled and slotted like a brake rotor to dissipate heat. This configuration helps to retain stock-like drivability. Smooth engagement comes from the two-stage sprung hub friction discs.

Renault Leaks Pictures, Details of 2015 Power Unit

With the Mercedes dominance of last year’s grid so profound and complete, much of the Formula 1 community is wondering if other engine suppliers can recover some of the lost ground, especially considering earlier news that Mercedes was up 50 hp over last year’s unit already. However, despite earlier reservations, Renault is confident in their power unit for this year, which they have just unveiled.

Race Tuner’s Biggest Challenges from a Piston-Maker’s Perspective

Gibtec may be a new name in competition piston-making, but its leaders aren’t new to the craft. Nick Plantus, one of the three founding partners of Diamond Racing in 1968 and his colleague, Rob Giebas from a younger generation, served roughly 20 years with the same operation, usually involved in development programs for NHRA Pro Stock programs. But when asked where he sees the biggest challenges in race engine tuning, Giebas responds with one word: Nitrous.

Lessons From Jack Welch

Jack Welch is one of the most successful business leaders of the last century. For those unfamiliar with him, Jack Welch was the CEO of General Electric from 1981 until his retirement in 2001. Over his 20-year tenure, Welch earned numerous awards for his leadership as CEO, culminating with Fortune magazine naming him “Manager of the Century” and ranking GE as “the most admired company” in 1996 and 1997.

Detroit Reman Named 2015 Heavy-Duty Remanufacturer of the Year

The Heavy Duty Remanufacturing Group (HDRG) of the Automotive Parts Remanufacturers Association (APRA) has awarded Detroit Reman its prestigious “Mike Hill Heavy Duty Remanufacturer of the Year Award.” The presentation was made on January 26, 2015 during the annual HDRG Summit at the Mirage Hotel in Las Vegas just prior to the start of the Heavy Duty Aftermarket Week (HDAW) also at the Mirage Hotel.

RxSpeed Launches as One-Stop Shop for Automotive Parts

RxSpeed, a comparison search engine for the motor vehicle aftermarket, has officially launched, featuring the industry’s most advanced product database showing consumers where to buy products at the lowest cost. Following the announcement of its beta version at the 2014 SEMA Show, RxSpeed.com has completed its usability testing and released its latest version for general availability. The company plans several more updates heading into the spring of 2015.

PDRA Extends Partnership with VP Racing Fuels Through 2017

The Professional Drag Racers Association (PDRA) has announced it extended its partnership with VP Racing Fuels, which will be designated “Official Fuel of PDRA” through 2017. As part of the agreement, VP will provide trackside fuel service for the all-eighth-mile drag racing series and post season awards up to $1000 in each class for the series championship.