PERA’s Core Corner: Trying To Make Sense Out Of Detonation Sensors
Here it is the New Year and I’m sure many of us have gone through the challenge of making resolutions to lose weight, quit smoking and so on and so on. We’ll look back 3 months from now and try to make sense of how our resolutions got lost in the shuffle. This month we
Crank And Cam Polishing: Are You Smooth Enough?
Manufacturers are designing today’s engines with tighter tolerances and less room for error. They make more power, live longer, produce less noise, vibration and friction, burn less fuel and produce lower emissions. So in light of all this, it is more important than ever for engine builders to be as perfect, or near perfect, as
Piston Ring Technology: Stock and Performance
Piston rings have one of the toughest jobs inside an engine. They’re slammed up and down between the ring lands thousands of times a minute; they’re subjected to searing temperatures and extreme pressures; and they’re constantly scraping back and forth against the cylinder walls. In spite of all of this, the rings are expected to
Installing a cam timing gear on a 1.8L Toyota
I’ve been having trouble installing a cam timing gear on a 1.8L Toyota. Any advice? The AERA Technical Committee offers the following information regarding the camshaft timing gear installation for 1998-2003 Toyota 1.8L 1ZZFE engines. Some difficulty has been expressed while installing this gear as the gear rotates within its hub. A new camshaft timing
PERAs Core Corner
It seems that the thirst for knowledge on the Gen III GM engine applications is growing almost as aggressively as the information for the 4.6L Fords. I addressed the subject of Gen III long and short crankshafts in a recent column (See September 2004 Engine Builder Core Corner). But based upon the number of responses
What A Year It’s Been…What!? It’s Been A Year?
As I sit here pondering the many topics I could choose to write about for my last column of 2004, I’m suddenly struck by the unbelievable fact that it is December already! Of 2004! Where did 2003 go? What happened to April, for crying out loud? Of course, the holiday shopping days always seem to
Planning For Failure Can Save You When It Happens
It’s an old story. A customer brings in a rebuild job and you do your normal quality job. You dot all the I’s and cross all the T’s and walk away from the engine stand knowing you’ve done a good job. The customer pays and off he goes with his prize. You make the mortgage
What A Year It’s Been…What!? It’s Been A Year?
As I sit here pondering the many topics I could choose to write about for my last column of 2004, I’m suddenly struck by the unbelievable fact that it is December already! Of 2004! Where did 2003 go? What happened to April, for crying out loud? Of course, the holiday shopping days always seem to
Tractor Pulling: It’s Not Your Granddad’s John Deere Anymore
Tractor pulling has been with us for as long as there have been tractors. Farmers used to pull their horses, mules or oxen and, just as today, each bragged that he had the biggest and strongest. Today, at the top echelons of pulling, the technology is equal to anything else in motorsports. Although you won’t
What’s Hot In Performance – Cams, Lifters & Rockers
The camshaft is really the heart of every performance engine because the cam defines the engine’s breathing potential, its torque curve and peak horsepower. The camshaft controls when the valves open, how quickly they open, how far they open (with some help from the rocker arms), how long the valves are held open, and when
Not So Stock: NASCAR Motors and Their Street Counterparts
The engines in NASCAR’s newly introduced Strictly Stock class of stock car racing in 1949 were literally stock, right off the dealer’s showroom floor. Today, they’re anything but. So what happened? Evolution. Like any sport or industry, evolution has moved NASCAR racing to where it is today, a multi-million dollar business. The engines, called ‘motors’
PERA’s Core Corner
I am convinced that the 4.6L Ford SOHC V8 engine casting component proliferation is attempting to compete with the children’s movie “The Never Ending Story:” it just keeps changing as it goes along for no apparent reason. However, what we are going to look at today is more of a James Bond mystery since no
Jeeps: 4.0L Cylinder Heads
The 4.0L came on the scene in 1987 and is still being used, however 2005 may be the end of the journey in domestic production. It’ll be a bittersweet farewell: most who have it love it. This is an old school inline six with lots of torque and there are still many of them out
Can You Keep Up With The Changes In The Industry?
In this fast-paced world, keeping up with any industry can be very trying. Keeping up with the latest trends can be the difference between success and failure. Those businesses that remain successful are those that continually stay at the forefront of their chosen field. The engine rebuilding business has seen tremendous change in the past
The Angle On Valve Seats
Valve seats seem to be a fairly simple engine component but they play a critical role in sealing compression and cooling the valves. When a seat becomes worn, it may leak compression and allow the valve to run hotter than normal. The same thing can happen if the seat is out-of-round or has lost its
New Clean Diesel Technology
With gasoline prices in the U.S. bouncing around the two dollars per gallon mark, record high oil prices and growing uncertainty over the price and availability of future oil supplies, any new technology that can give consumers more bang for their buck should be welcomed. Domestic vehicle manufacturers have virtually abandoned further development of electric
Bedplate torque sequence for a Chrysler 4.7L
What is the bedplate torque sequence for a Chrysler 4.7L? My manual doesn’t seem to list all the fasteners. The AERA Technical Committee offers the following information regarding the main bearing cap/bedplate bolt torque and sequence for 1999-2004 Chrysler 4.7L VIN N engines. This engine uses multiple fasteners at many different locations to secure the
PERA’s Core’s Corner
Some months back (December 2003 Engine Builder, to be exact), I wrote about some of the identification features of the Gen III GM V8 engines. Considering that the Gen IV with DOD (Displacement on Demand) is about to be released, this is probably a good time to go over a few other things that you
Ford Timing Chains and Belts
So if a customer is driving a vehicle that is more than 5 or 6 years old, he may be driving on borrowed time if the timing belt has not been replaced. The risk of belt failure goes up sharply once a belt surpasses its recommended replacement interval, which for most Ford applications (except the
Rebuilding The Ford 3.0L V6
The 3.0L Ford pushrod motor has been around for nearly 20 years. It was originally introduced back in 1986 and millions of them have been installed in a wide variety of front and rear wheel drive cars and trucks since then. It’s been used in several FWD applications including the Taurus/Sable, the Tempo/Topaz and the