You searched for tools - Engine Builder Magazine
LSM Racing Valve Spring Removal Tools

This tool can handle up to 1,000-lbs. of spring pressure—plenty of grunt for even the gnarliest of performance engines.

valve spring remover
Brush Research BC Series Flex-Hone Deburring Tools

The hones self-align, self-center and self-compensate for wear, so no setup or special training is required to use them.

Engine & Hub Dynos: Necessary Tools and Additional Revenue

Being able to see the horsepower and the direct correlation to what is lost in the driveline is invaluable – dynos offer a myriad of benefits for the modern engine shop.

TITANS of CNC partners with HELLER Machine Tools

The key points of the agreement include a cooperation in machining technology, process, and practical application. TITANS of CNC will install two 5-axis machining centers into their Texas facility. The HF 5500 with the fifth axis in the workpiece and the CP 6000 with the fifth axis in the tool – and a Round Pallet

Mayhew Tools Named Official Tool Sponsor of the Northeastern Champ Kart Series

 Mayhew Steel Products Inc. (Mayhew Tools), has announced a new tool sponsorship with the Northeastern Champ Kart Series for the 2022 racing season. As the official tool sponsor, Mayhew will provide the winner of each race with a 6-piece capped screwdriver set. The series kicks-off May 14th and runs through October 2nd, consisting of 16 races over

An Engine Builders Tools: Micrometers

A micrometer is considered one of the most accurate measuring tools there is. What makes this so is that the measurement and the reading are on the same axis and the anvil is supported by a very rigid frame.

Calibration Tools – A Measure of Success

It’s all about precision and accuracy, and you rely on your tools and equipment to attain the critical accuracy you need for the quality your customers depend on.

Methods Machine Tools’ Nakamura-Tome MX-100 Multitasking Machining Center

The new multitasking turning center is equipped with a powerful 15 HP upper tool spindle with 20,000 rpm and turning capability. A 8,000 rpm milling turret offers 12 tool stations with 24 indexing positions.

OTC H-D Engine Service Tools for Detroit Diesel

Designed with the technician in mind, the tools are made to help keep heavy-duty trucks on the road by making preventative maintenance, inspections and service easier and more efficient.

OTC Fuel Injection Tools for H-D Detroit Diesel Engines

The expansion of OTC’s heavy-duty product lineup allows technicians to better perform preventative maintenance, inspections and service on Detroit Diesel Series 60, two-cycle Series 53, 71, DDEC IV engines and more.

OTC Crank & Cam Tools for Detroit Diesel Engines

New crankshaft and cam tools include a crankshaft seal and wear sleeve installer, an alignment tool and replacement tip, along with a cam gear alignment fixture, retaining tool and an alignment tool. Each tool is for use on multiple variants of Detroit Diesel engines.

Mayhew Acquires BestWay Tools

Mayhew Steel Products, Inc. (Mayhew Tools) has acquired Florida-based BWT FLA, LLC, BestWay Tools. Both companies manufacture high-quality hand tools in the USA. They will each continue to operate independently.

Cornwell Quality Tools Platinum Series Tool Box

Several new paint and trim color combinations have been added to the Cornwell Quality Tools Platinum Series line of tool boxes. Introduced in early 2019, the Platinum Series tool boxes offer larger, dependable, high-end tool storage solutions.

Snap-on Shop Tools

Work in the shop or anywhere can be more efficient and effective with the added comfort and strength of these new tools and products from Snap-on.

Methods Machine Tools Vertical Machining Centers

Methods Machine Tools, Inc., a supplier of precision machine tools and automation, has introduced a new line of Methods Branded 3-Axis Vertical and 5-Axis Bridge Type Machining Centers.

Mayhew Tools Sponsorships NASCAR’s Whelen Modified Tour Pole Award

Mayhew Steel Products, Inc. announced its sponsorship of the Whelen Modified Tour’s Pole Award for the 2019 season, which begins on Saturday, March 16 at Myrtle Beach Speedway in South Carolina.

Proform Harmonic Balancer Installation Tools

Proform has announced four new harmonic balancer installation tools for vintage applications like Ford/Pontiac/Buick, and Oldsmobile, and a foray into late-model applications for Dodge/Chrysler/Jeep/Ford.

Mayhew Tools Announces Wayne Smith as Western Regional Sales Manager

In this new role, Smith will be responsible for managing the premium hand tool manufacturer’s sales teams throughout Western United States.

ARP Ring Squaring Tools

ARP’s Performance R&D division has just released six new dual size Ring Squaring tools designed to make fitting piston rings as accurate as possible.

Join PERA for a Webinar on Measuring Tools for Geometry and Surface Finish

In this webinar, Bob Dolder of Sunnen Products will cover: measuring tools for geometry and surface finish, tooling and the variety of different abrasives and how they affect honing engine blocks.