Sandy Wilkins Invites Us to Tour Wilkins Racing Engines
When we were in Mooresville, NC this summer, we kept seeing signs for Wilkins Racing Engines, so we took the hint and stopped at the shop to check it out. Shop owner Sandy Wilkins invited us in and we were not disappointed! This engine machine shop does a number of different things for several racing
632 cid Big Block Chevy Nitrous Engine
With a storied race history of his own, Sandy Wilkins has taken his passion for cars and engines and turned it into his life. From race teams to Roush Yates Performance to opening Wilkins Racing Engines, he knows how to build high-horsepower engines like this 632 cubic inch big block Chevy nitrous engine for No Prep drag racing. Check it out!
Wilkins Racing Engines’ 632 cid Big Block Chevy Nitrous Engine
Sandy Wilkins of Wilkins Racing Engines recently allowed us to visit his engine and machine shop in Mooresville, NC. We were thoroughly impressed by how clean and organized his shop was and the caliber of the engines his shop churns out. We got the full details of this big block Chevy nitrous engine he built
World Products’ Motown II SBC Iron Block
The Motown II can be bored to a maximum of 4.200″ with clearance for a 4.000″ crank.
Naturally Aspirated 598 cid Big Block Chevy Engine
Pete and Jake Gibbons of Gibbons Motorsports are constantly cranking out high-quality engine builds. Occasionally, they get to build an engine for themselves, such as this 900 horsepower, 598 cubic inch, big block Chevy engine. Check out this naturally aspirated beast!
Gibbons Motorsports’ 598 cid Big Block Chevy Engine
When an engine builder is spec’ing a build for himself, it typically gets all the bells and whistles. Just check out this 598 cubic inch big block Chevy build done by Gibbons Motorsports for co-owner Jake Gibbons. We spoke with Pete Gibbons, Jake’s older brother and co-owner of the shop, about the details of this
Fluidampr and Performance Racing Industry Since the Beginning
Established in 1985 as the performance division of Vibratech TVD. Fluidampr is a leader in viscous torsional dampers for the performance aftermarket.
2,600 HP ProCharged 540 cid Big Block Chevy Engine
BB&T Racing in South Haven, MS has been building high-performance domestic engines for 30 years. One of their latest builds is for a drag racing customer looking to go faster utilizing an F3 ProCharger. Check out this 2,600 hp ProCharged 540 big block Chevy engine!
Speedmaster Assembled Cylinder Heads
Speedmaster Assembled Cylinder Heads come ready to run with stainless steel valves; valve springs; and valve seals, locks, and retainers. They are sold in pairs.
BB&T Racing Shop Tour and ProCharged 540 cid Big Block Chevy Engine Build
During a recent trip to Memphis, TN, we stopped in at BB&T Racing in South Haven, MS to meet with shop owner Derrick Bailey and check out the engine machine shop that opened in 1994. Derrick showed us around and walked us through the details of a ProCharged 540 cid big block Chevy engine he
615 cid Big Block Chevy Nitrous Engine
It’s no secret that turbochargers dominate the power adders seen in drag-and-drive events, and to a lesser degree, superchargers. However, very few competitors resort to nitrous. Graham Hayes is one of those nitrous believers, and his Buck Racing Engines-built 615 cid big block Chevy engine put on a strong performance all five days of Sick Week 2023. Check it out.
Graham Hayes’ 615 cid Big Block Chevy Nitrous Engine
As the last few remaining hours of Sick Week ticked away, we got a chance to speak with Graham Hayes about his 1966 Chevy Nova and its 615 cubic inch big block Chevy nitrous engine built by Buck Racing Engines. It’s our Engine of the Week!
