Engine of the Week Archives - Page 5 of 48 - Engine Builder Magazine
Supercharged 4.900” Bore Space Hemi Engine

Building upon its 4.800″ bore space Hemi engine platform, Noonan Race Engineering made improvements to its 4.900″ bore space Hemi engine to the point that its now one of the engine shop’s bread and butter builds. Don’t let that fool you – this engine is packed with unique features and the performance to back it all up. Check it out.

Noonan Race Engineering’s Supercharged 4.900 Bore Space Hemi Engine

This summer, we got the chance to visit Spartanburg, SC and Noonan Race Engineering‘s new state-of-the-art facility. The Noonan operation is top notch through and through, and it shows in engine builds like this supercharged 4.900 bore space Hemi. Noonan’s Barry Pettit walks us through all the details in this Engine of the Week!

5.3L LS Engine

Tony Paladino’s shop, Concord Engines, has been serving the Kannapolis, NC area with engine rebuilding and machining services since 2014. One engine platform they specialize in is the LS, and it is offered in three different power levels and configurations. Check it out!.

Concord Engines’ 5.3L LS Engine Build

We’ve visited Tony and the boys at Concord Engines before. The Kannapolis, NC-based shop does engine and machine work on a ton of different platforms. While we were there this past summer, Tony has a 5.3L LS engine getting rebuilt. The shop has three different variations it can do with this combo – stock, street

731 cid Outlaw 4.840 Bore Space Nitrous Engine

When it comes to building a 4.840″ bore space engine for drag racing, the class is limited on deck height and limited on bore space, but anything else pretty much goes. Pat Musi of Pat Musi Racing Engines recently finished development on his state-of-the-art 4.840 engine platform, and this 731 cid nitrous combo is freaking awesome!

Pat Musi Racing Engines’ Outlaw 4.840 Bore Space Nitrous Engine

We love every opportunity we get to speak with Pat Musi of Pat Musi Racing Engines. This time, we were down in Mooresville, NC to check out his shop in person and get the details of a few engine builds he had underway. This is an Outlaw 4.84 nitrous engine with 731 cubic inches of

632 cid Big Block Chevy Nitrous Engine

With a storied race history of his own, Sandy Wilkins has taken his passion for cars and engines and turned it into his life. From race teams to Roush Yates Performance to opening Wilkins Racing Engines, he knows how to build high-horsepower engines like this 632 cubic inch big block Chevy nitrous engine for No Prep drag racing. Check it out!

Wilkins Racing Engines’ 632 cid Big Block Chevy Nitrous Engine

Sandy Wilkins of Wilkins Racing Engines recently allowed us to visit his engine and machine shop in Mooresville, NC. We were thoroughly impressed by how clean and organized his shop was and the caliber of the engines his shop churns out. We got the full details of this big block Chevy nitrous engine he built

448 cid Billet LS Engine

Pete Harrell of Harrell Engine & Dyno is real good at doin’ stuff, like building turbocharged and forced induction high-powered engines such as this 448 cid billet LS engine for Limited Drag Radial. Check out what went into this 2,500+ HP engine!

Harrell Engine & Dyno’s 2,500+ HP Turbocharged 448 cid Billet LS Engine

We all know Pete Harrell of Harrell Engine & Dyno in Mooresville, NC is real good at doin’ stuff, like building high-horsepower, forced induction engines. Earlier this summer, we stopped by HED for a tour and to talk to Pete about some of the current builds he had going on. One of the engines nearing

Naturally Aspirated LS3-Based TA2 Engine

With a 40-year history in all sorts of racing, machining and engine building, Pro Motor Engines in Mooresville, NC can do just about anything in-house from NASCAR to drag racing and everything in between. Just check out this LS3-based TA2 spec engine!

Pro Motor Engines’ LS3 Engine Build for TA2 Racing

Pro Motor Engines in Mooresville, NC and owner Dennis Borem have a rich history in NASCAR and other forms of racing. We got to visit the shop earlier this summer, and the team was wrapping up a dyno session on a newly assembled LS3 engine for TA2 racing. We got the full details of the