Goodson Tools Archives - Page 3 of 4 - Engine Builder Magazine
Goodson Expands Flywheel Grinding Stone Selection

Goodson Tools & Supplies for Engine Builders has expanded its selection of Flywheel Grinding Stones to include two small diameter CBN Flywheel Grinding Stones and two new vitrified stones.  CBN Flywheel Grinding Stones are now available in a 2˝ and 3˝ straight-sided 100 grit wheels. They are intended for use on Cast Iron for light

Goodson Pneumatic Valve Spring Compressor

Goodson Tools & Supplies for Engine Builders has introduced a Pneumatic Valve Spring Compressor that is certified to 1000 pounds of force.  This valve spring compressor is lightweight but durable, built of 6061/7075 T-6 aluminum. The two-stage air pump develops up to 1,000 pounds of force on as little as 90 PSI shop air.  Two

Goodson Bucket Lifter Grinder

The complete Bucket Lifter Grinder Assembly includes an air driver, CBN cutter, micrometer feed body, dial indicator and indicator base.

Goodson to Host AERA Tech & Skills Conference August 11, 2020

Goodson Tools & Supplies for Engine Builders is set to host an AERA Tech & Skills Conference at its Winona location on August 11, 2020.  According to Dave Monyhan, Goodson sales manager, “2020 is Goodson’s 75th Anniversary and we couldn’t think of a better way to celebrate and give back to the automotive industry than

Goodson’s Owner Scott Biesanz Retires

Scott Biesanz, the owner of Goodson Tools & Supplies for Engine Builders, has retired. Biesanz purchased the company in 1979 from the Winona Tool Company and has over 40 years of accomplishments under his belt.

If You’re Not Measuring, You’re Guessing

Today’s tolerances are much closer than they have ever been and that is why exact measurement is necessary. Way back when, we mostly had to deal with three decimal places. Today we’re going out to four decimal places. Why? What has changed?

Goodson Names New President, Ops Manager

Goodson Tools & Supplies for Engine Builders, Winona, MN has named Roger Schumacher president, effective January 1, 2018. Schumacher, who has been with Goodson since 2000 serving as the company’s Controller and since 2012, as Goodson Operations Manager, replaces Juan Roche, who is retiring after 35 years with Goodson. Roque has been part of the automotive

Goodson Tools & Supplies for Engine Builders Launches New Website

Goodson Tools & Supplies for Engine Builders recently launched a new website design aimed at improving the user experience. Faster load times larger, more detailed product images than before.

Goodson Tools and Supplies for Engine Builders – PRI 2016

Dave Monyhan of Goodson Tools and Supplies talks about the latest and greatest equipment coming for 2017.

Goodson Kwik-Way 45-Degree Hex Drive Electric Seat Grinding Motor Unit

These heavy-duty units operate at 11,500 RPM, weigh nine pounds and are available in 110V and 220V models. Use the electric motor with OE Hex Drive Stone Holders, also available from Goodson. Manufactured to original Kwik-Way specs by Goodson Tools & Supplies.

Goodson Engine Pre-Lube Tank

Goodson Tools & Supplies for Engine Builders recently completed the development of a 12-quart Engine Pre-Lube Tank and has released it to the automotive aftermarket. What makes this tank unique is the pop-off safety valve and the 12-quart capacity.

Goodson Tools & Supplies Named Exclusive Distributor for Radiac Automotive Aftermarket Abrasives

Goodson Tools & Supplies for Engine Builders and Radiac Abrasives, Inc. have announced Goodson has been named as the exclusive distributor of Radiac’s line of Automotive Aftermarket Abrasives, effective June 1, 2015.