Turbocharged Archives - Page 6 of 16 - Engine Builder Magazine
Supercharged 4.900” Bore Space Hemi Engine

Building upon its 4.800″ bore space Hemi engine platform, Noonan Race Engineering made improvements to its 4.900″ bore space Hemi engine to the point that its now one of the engine shop’s bread and butter builds. Don’t let that fool you – this engine is packed with unique features and the performance to back it all up. Check it out.

Triple-Turbo 12-Valve Cummins Engine

Resurrecting an old Dodge truck that had rolled down a mountain, Mike Martin’s “Franken Truck” has undergone quite the transformation. The build features a triple-turbo 12-valve Cummins engine, and it’s only the beginning of Martin’s plans for the build. Check it out!

Turbocharged 5.9L 12-Valve Cummins Engine

Logan Yelton’s ’93 Dodge has gone through quite the transformation. It was once used to transport him and his wife to prom back in the day to now burning rubber on the drag strip with 1,800 horsepower on command. This 5.9L 12-valve Cummins-powered monster has done it all. See what went into the build!

393 cid Billet Cummins Engine

When it comes to power, the engine propelling Scheid Diesel’s drag car doesn’t dissapoint. It makes 2,800 horsepower on fuel alone… no wonder it’s a record setter!

Turbocharged LML Durmax Dragster

Everybody loves a good diesel dragster! Paul Vasko’s is an LML Duramax, complete with a GT55 turbo, a heap of nitrous, and a number of other additions that make this build an absolute powerhouse.

Cancer Sucks S10 with a Compound Turbo 5.9L Cummins Engine

It’s hard to miss Stainless Diesel’s #CancerSucks S10, which features a compound turbo 5.9L Cummins engine. During the 2023 Ultimate Callout Challenge, we caught up with Steve O’Neal to get the details of this special truck and it’s Cummins powerplant for our Diesel of the Week.

448 cid Billet LS Engine

Pete Harrell of Harrell Engine & Dyno is real good at doin’ stuff, like building turbocharged and forced induction high-powered engines such as this 448 cid billet LS engine for Limited Drag Radial. Check out what went into this 2,500+ HP engine!

Harrell Engine & Dyno’s 2,500+ HP Turbocharged 448 cid Billet LS Engine

We all know Pete Harrell of Harrell Engine & Dyno in Mooresville, NC is real good at doin’ stuff, like building high-horsepower, forced induction engines. Earlier this summer, we stopped by HED for a tour and to talk to Pete about some of the current builds he had going on. One of the engines nearing

Twin-Turbocharged 12-Valve Cummins Engine

Life-sized Hot Wheels? Say less. Sean Smith and his wife built this rat rod from scratch and it was a contender in last year’s Hot Wheels Legends Tour. But it’s not only for show – thanks to a twin-turbo’d 12-valve Cummins under the hood, this ride makes quite a bit of power too!

Triple-Turbo 6.7L Powerstroke Engine

Is there anything better than a diesel dragster? Yes. One with three big S480s mounted on it. This Powerstroke was built by Dan Snyder of SPE Motorsport and we got the scoop on it at this year’s Ultimate Callout Challenge.

Turbocharged and Nitrous-Powered 6.0L Powerstroke Engine

At this year’s Ultimate Callout Challenge, we ran into more folks just starting to get into racing their diesels than we have in the past. One such racer was Connor Wagner of Wagner Diesel Solutions. His shop specializes in the Powerstroke platform, so he decided it was time to start showcasing what he can do

Turbocharged 6.0L Powerstroke Engine

You can always count on Warren Diesel Injection to pull up to events in a sweet Powerstroke truck – they’ve been innovating the platform for over a decade. We saw this 6.0L at the 2023 Ultimate Callout Challenge and this thing is next level awesome.