Your resource for product and contact information for suppliers to the engine building industry.

Not Listed? Add your company information here
Suppliers/Manufacturers: Update Your Buyers Guide Listings Here
AllABCDEFGHIJKLMNOPQRSTUVWXYZ

Motor State Distributing

8300 Lane Dr.
Watervliet MI 49098
 Phone: 800-772-2678Phone: 800-772-2678Fax: 800-772-2618
Contact: Scott Wahlstromhttp://www.motorstate.comTwitterFacebook[email protected]
Categories: Adhesives, All Weather Lubricant Spray, Aluminum Cleaners, Aluminum Cutting/Tapping Oil, Assembly Tools, Bearings (camshaft), Bearings (engine sleeve type), Bearings (main rear main), Bearings (Rod), Belt Tensioner/Idlers, Break-In Oil, Broken Bolt Extractors, Calipers, Cam Bearing Installation Tool, Camshaft Kits, Camshaft Seals, Camshaft Thrust Plate and Parts, Camshafts, Carbon & Paint Stripper, Chain Kits, Clamps, Cleaners General Use, Complete Engines, Component Part Coatings, Connecting Rod Gauges, Connecting Rods, Connecting Rods Nuts Bolts, Countersinks, Crankshaft Bags, Crankshaft Conversions, Crankshaft Kits, Crankshaft Oil Slingers, Crankshaft Pulley Sleeves, Crankshaft Repair Sleeves, Crankshaft Seals, Crankshafts, Cylinder Head Bags/Boxes, Cylinder Head Components, Cylinder Head Holders, Cylinder Head Polishing, Cylinder Head Porting, Cylinder Heads New: Aluminum Bare, Cylinder Heads New: Aluminum Complete, Cylinder Heads New: Cast Iron Bare, Cylinder Heads New: Cast Iron Complete, Cylinder Liners (sleeves), Degreasers, Diagnostic Tools, Dial Indicators, Die Tools, Dowel Pins, Dowel Pullers, Drills, Engine Additives, Engine Assembly Fluid/Prelube, Engine Bags, Engine Blocks, Engine Coolant, Engine Dollies, Engine Hoists, Engine Kits, Engine Lift Fixtures, Engine Mounts, Engine Oil, Engine Oil (Racing), Engine Pre-Lubricant, Engine Stands, Exhaust Components, Exhaust Components: Complete Systems, Feeler Gauges, Filters - Air, Filters - Fuel, Filters - Oil, Floor Cranes, Flush Solvent, Flywheel Assemblies, Freeze Plug Tool, Fuel System Components, Gasket Cement, Gasket Scrapers, Gaskets, Gauges, General Welding Equipment, Graphite Oil Spray, Grease, Grinders, Grinding Compounds, Hand Cleaners, Harmonic Balancer Repair Sleeves, Head/Block Crack Repair Kits, Heat Guns, Hex Shafts, Holding Fixtures, Honing Plates, Inspection Mirrors, Intake Manifolds, Keys, Leak Down Tester, Lockwashers, Lubricants, Main Caps (4-bolt), Manifold Studs, Mechanics Tools, Micrometers, MIG Welding Equipment, Moly Paste, Nuts and Bolts, Oil Coolers, Oil Filter Adapters, Oil Leak Detection, Oil Pans, Oil Pressure Springs, Oil Pump Kits, Oil Pump Screens, Oil Pump Shafts, Oil Pump Timing Covers, Oil Pumps, Oil Spray, Parts Cleaning Brushes, Penetrating Oil, Piston Pin Bushings, Piston Pin Lock Rings, Piston Pins, Piston Rings, Pistons, Plugs - Expansion, Plugs - Magnetic, Plugs - Oil Drain, Plugs - Standard, Pneumatic Tools, Polishers, Portable Air or Electric Hoists, Protective Covers/Containers, Pullers, Push Rod Guide Plates, Push Rods, Radiator/Oil Fans, Reamers and Special Tools, Rering Kits, Restoration Engine Parts, Returnable Engine/Core Cases, Ring Tools, Rocker Assemblies and Kits, Rocker Stud Girdles, Rod Bolt Protectors, Rod Vises, Rust Inhibitors, Rust Remover, Sanders, Seals, Serpentine Belts, Shims, Short Blocks, Silicone Spray, Soldering Tools, Spark Plugs, Spray Paints, Springs, Stands, Stud Pullers, Switches, Tappets, Taps, Test Equipment, Thickness Gauge, Thread Gauges, Thread Repair, Thrust Washers, TIG Welding Equipment, Timing Components, Timing Covers, Torque Plates, Vacuum Tester, Valve Covers, Valve Guide Hone, Valve Guide Reamer, Valve Guide Tool, Valve Keys, Valve Lifter Balls, Valve Lifters, Valve Locks and Seals, Valve Seat Inserts, Valve Spring Compressor, Valve Spring Inserts, Valve Spring Retainers, Valve Spring Testers, Valve Springs, Valve Stem Height Measuring, Valve Stem Oil Seals, Valve Train Parts, Valves, Water Pumps, Wire Brushes, Wrenches, Zinc Oil Additives

Recent Products

Recent News

Videos


Nickels Performance

293 Industrial Park Rd.
Piney Flats TN 37686
 Phone: 800-251-0331Phone: 423-391-0032Fax: 423-391-0208
Contact: Tom Resslerhttp://www.nickelsperformance.com[email protected]
Categories: Adhesive Dispensing, Adhesives, All Weather Lubricant Spray, Aluminum Cleaners, Assembly Tools, Balancing Accessories, Bearings (camshaft), Bearings (engine sleeve type), Bearings (main rear main), Bearings (Rod), Belt Tensioner/Idlers, Break-In Oil, Bushings, Cam Caps, Camshaft Belt Drives, Camshaft Kits, Camshaft Seals, Camshafts, Carburetors, Chain Kits, Chemicals & Solvents, Cleaners General Use, Connecting Rods, Crankshaft Kits, Crankshaft Oil Slingers, Crankshaft Pulley Sleeves, Crankshaft Repair Sleeves, Crankshaft Seals, Crankshafts, Cylinder Head Components, Cylinder Heads New: Aluminum Bare, Cylinder Heads New: Aluminum Complete, Cylinder Heads New: Cast Iron Bare, Cylinder Heads New: Cast Iron Complete, Cylinder Heads Reman: Aluminum Bare, Cylinder Heads Reman: Aluminum Complete, Cylinder Heads Reman: Cast Iron Bare, Cylinder Heads Reman: Cast Iron Complete, Cylinder Liners (sleeves), Dipstick Adapters (Chevy Ford), Dowel Pins, EFI Components, Engine Additives, Engine Assembly Fluid, Engine Assembly Fluid/Prelube, Engine Blocks, Engine Components, Engine Coolant, Engine Equipment & Preparation, Engine Kits, Engine Management Systems/ECUs, Engine Mounts, Engine Oil, Engine Oil (Racing), Engine Pre-Lubricant, Exhaust Components, Exhaust Components: Leak Detection, Exhaust Components: Manifolds, Filters - Air, Filters - Fuel, Filters - Oil, Fuel Injection - Electronic, Fuel Injection - Mechanical, Fuel Pumps, Fuel System Components, Gaskets, Gear Drives, Grease, Hand Tools, Harmonic Balancer Repair Sleeves, Harmonic Balancers/Dampers, Head Bolts/Studs, Ignition Components, Injectors - Diesel, Injectors - Gasoline Direct, Intake Manifolds, Lubricants, Main Caps (4-bolt), Manifold Studs, Marking and Identification, Mechanics Tools, Nitrous Oxide Systems, Components, Nitrous Valves and Plates, Nuts and Bolts, Oil Coolers, Oil Pans, Oil Pump Kits, Oil Pumps, Oiling Systems; Dry Sump, Piston Pins, Piston Rings, Pistons, Plugs - Expansion, Push Rods, Radiator/Oil Fans, Restoration Engine Parts, Rocker Assemblies and Kits, Rocker Stud Girdles, Seals, Serpentine Belts, Shims, Short Blocks, Spark Plugs, Spray Paints, Springs, Superchargers, components, Supplies & Service, Test Equipment, Thread Repair, Timing Belt/Chain Tensioner, Timing Belts/Chains, Timing Chains, Gears, Sprockets, Timing Components, Timing Covers, Turbochargers, components, Valve Covers, Valve Guides, Valve Lifters, Valve Springs, Valve Train Parts, Valves, Water Pumps, Zinc Oil Additives

Recent Products

Recent News

Videos


Rottler Manufacturing LLC

8029 S. 200th St.
Kent WA 98032
United States Phone: 253-872-7050Fax: 253-395-0230
http://www.rottlermfg.comInstagramhttps://plus.google.com/118104156246843089122LinkedinTwitterFacebookYoutube[email protected]
Categories: Balance Shaft Line Boring Equipment, Boring Bar Inserts, Boring Bar Tool Bits, Boring Machines/Connecting Rod, Boring Machines/Cylinder, Boring Machines/Line, Boring Stand (For Portable Boring Machines), Cap & Rod Grinder, CBN Inserts - New, CNC Machining Centers, CNC Retrofit Kits, Connecting Rod Gauges, Cylinder Head Adapter Plates, Cylinder Head Assembly/Disassembly Equip., Cylinder Head Chamfering Tool, Cylinder Head Holders, Cylinder Head Porting, Cylinder Porting Tools, Diesel Injector Hole Repair Tools, Head/Block Resurfacing (Milling), Holding Fixtures, Honing Jigs, Honing Machines Wrist Pin, Honing Machines/Cylinder, Honing Machines/Line, Honing Machines/Rod, Honing Machines/Valve Guide, Honing Oil, Honing Plates, Honing Stones, In-Process Gauges(Cam and Crank Grinders), Inspection Gauges, Leveling Device, OHC Line Boring Tools, PCD Inserts - New, Piston Knurler, Replacement Chuck for Valve Facers, Test Equipment, Thickness Gauge, Torque Plates, Valve Grinding Bench, Valve Guide & Seat Machine, Valve Guide Boring Fixture, Valve Guide Hone, Valve Guide Pilot, Valve Guide Reamer, Valve Guide Tool, Valve Refacer (Cutter), Valve Refacer (Grinder), Valve Refacer Wheels, Valve Seat Cutters, Valve Seat Inserter, Valve Seat Pullers, Valve Seat Resurfacer, Valve Seat Runout Gauge, Valve Stem Grinder

Recent Products

Recent News

Videos


Audie Technology

23 N. Trooper Road
Norristown PA 19403
United States Phone: 610-630-5895Fax: 610-630-5894
Contact: Audie Thomashttp://www.audietechnology.com[email protected]
Categories: Air Flow Benches, Diagnostic Tools, Test Equipment

Recent Products

Recent News

Videos


Easy Run Engine Test Stands

7111 Arlington Ave. Ste. C
Riverside CA 92503
United States Phone: 951-780-8392Phone: 1-800-780-0634Fax: 951-525-3942
Contact: Alan Freilichhttp://www.easy-run.nethttps://www.facebook.com/easyrunengineteststandshttps://twitter.com/EZEngineStandshttps://www.youtube.com/user/EasyRunStandshttps://plus.google.com/+EasyRunEngineTestStandsRiverside[email protected]
Categories: Engine Dollies, Engine Equipment & Preparation, Stands, Test Equipment

Recent Products

Recent News

Videos


Froude / Go Power Systems

41123 Jo Drive
Novi MI 48375
 Phone: 248-579-4295Fax: 248-536-2810
Contact: Kenzo Crocketthttp://www.gopowersystems.com[email protected]
Categories: Dynamometers, Test Equipment

Recent Products

Recent News

Videos


Goodson Tools & Supplies

156 Galewski Dr.
Winona MN 55987
 Phone: 800-533-8010Phone: 507-452-1830Fax: 888-466-3909
Contact: David P. Monyhanhttps://goodson.com[email protected]
Categories: Abrasive Blast Guns, Agitating Degreaser, Aluminum Cutting/Tapping Oil, Assembly Tools, Balancing Accessories, Belt Tensioner/Idlers, Block Pressure Testing Equipment, Bushings, Calipers, Cam Bearing Installation Tool, Camshaft Thrust Plate and Parts, CBN Inserts - New, Cleaners General Use, Connecting Rod Gauges, Crack Repair Equipment, Crankshaft Bags, Cylinder Head Assembly/Disassembly Equip., Cylinder Head Bags/Boxes, Cylinder Head Holders, Demagnetizers, Diagnostic Tools, Dial Bore Gauges, Dial Indicators, Dipstick Adapters (Chevy Ford), Drills, Engine Assembly Fluid/Prelube, Engine Bags, Engine Stands, Exhaust Components: Leak Detection, Flexible Honing Tools/Brush Hones, Gasket Cement, Gasket Scrapers, Gauges, Grinding Coolants, Grinding Wheels, Hardness Testers, Head/Block Crack Repair Kits, Heat Tabs Temperature Sticks, Hone Stop Fixture, Honing Plates, Honing Stones, Inspection Gauges, Leak Down Tester, Leveling Device, Lubricants, Magnetic Particle Inspection Crack Detection, Micrometers, OHC Line Boring Tools, Oil Leak Detection, Parts Cleaning Brushes, Parts Washer Baskets, Piston Ring Compressors, Pneumatic Tools, Protective Covers/Containers, Pullers, Reamers and Special Tools, Replacement Chuck for Valve Facers, Rod Bolt Protectors, Rod Furnace, Rod Vises, Seals, Shims, Springs, Stands, Stud Pullers, Taps, Test Equipment, Timing Components, Vacuum Tester, Valve Guide Liners, Valve Guide Tool, Valve Guides, Valve Seat Cutters, Valve Seat Runout Gauge, Valve Seat Tool Grinder, Valve Seat Wheels, Valve Spring Compressor, Valve Spring Testers, Valve Stem Grinder, Valve Stem Height Measuring, Valve Stem Oil Seals, Valve Stem Polisher, Valve Train Parts

Recent Products

Recent News

Videos


J-TEC Associates

5005 Blairs Forest Lane NE
Cedar Rapids IA 52402
 Phone: 319-393-5200Fax: 319-393-5211
Contact: Tom Oliverhttp://www.j-tecassociates.com[email protected]
Categories: Dynamometers, Test Equipment

Recent Products

Recent News

Videos


Measurement Supply Company Inc.

12157 West Linebaugh Ave. #422
Tampa FL 33626
United States Phone: 888-502-0220Fax: 813-315-6347
Contact: Chris Sudetichttp://www.measurementsupply.com[email protected]
Categories: CAD/CAM Software, Dial Bore Gauges, Inspection Gauges, Test Equipment, Thickness Gauge, Thread Gauges

Recent Products

Recent News

Videos


MTS Powertrain

4622 Runway Blvd
Ann Arbor MI 48108-9555
United States Phone: 734-973-1111Fax: 734-973-1103
http://www.mtspt.com
Categories: Dynamometers, Test Equipment

Recent Products

Recent News

Videos


PCE Instruments UK Ltd

Units 12/13 Southpoint Business Park, Ensign Way
Southampton Hampshire SO31 4RF
United States Fax: +44 (0) 2380 987039
Contact: John http://www.industrial-needs.com/[email protected]
Categories: Dynamometers, Exhaust Leak Detection, Hardness Testers, Ignition System Testers, Inspection Gauges, Magnetic Particle Inspection Crack Detection, Oil Leak Detection, Test Equipment, Thickness Gauge, Ultrasonic Test Equipment

Recent Products

Recent News

Videos


Performance Trends

31531 Eight Mile Rd.
Livonia MI 48152
 Phone: 248-473-9230Fax: 248-442-7750
Contact: Kevin Gertgenhttp://www.performancetrends.com[email protected]
Categories: Air Flow Benches, Camshaft Degree Wheel (Digital), Dynamometers, Engine Cycle Analyzer, Engine Equipment & Preparation, Inspection Gauges, Leak Down Tester, Test Equipment, Valve Spring Testers

Recent Products

Recent News

Videos


Powerhouse Products

3402 Democrat Rd.
Memphis TN 38118
United States Phone: 901-795-7600Fax: 901-375-3430
Contact: Jennifer Leehttp://www.powerhouseproducts.com[email protected]
Categories: Block Pressure Testing Equipment, Cam Bearing Installation Tool, Cylinder Head Assembly/Disassembly Equip., Cylinder Head Chamfering Tool, Cylinder Head Gauge, Cylinder Head Holders, Cylinder Head Polishing, Cylinder Head Pressure Tester, Cylinder Porting Tools, Engine Equipment & Preparation, Inspection Gauges, Leak Down Tester, Micropolishing Equipment, Test Equipment, Valve Guide Tool

Recent Products

Recent News

Videos


R & J Manufacturing Co.

3200 Martin Rd.
Walled Lake MI 48390-629
United States Phone: 248-669-2460Fax: 248-669-3006
Contact: Glen Ridgwayhttp://www.rjman.com[email protected]
Categories: Assembly Tools, Customized Boxes, Test Equipment

Recent Products

Recent News

Videos


Rockwell Automation, Inc.

1201 South Second Street
Milwaukee WI 53204
 Phone: 414-382-2000Phone: 888-382-1583Fax: 414-382-4444
Contact: Product Information http://www.rockwellautomation.com[email protected]
Categories: CAD/CAM Software, CNC Retrofit Kits, Hardness Testers, Inspection Gauges, Test Equipment

Recent Products

Recent News

Videos


Sakor Technologies

2855 W. Jolly Rd.
Okemos MI 48864
United States Phone: 517-332-7256Fax: 517-332-7250
Contact: Randy Beattiehttp://www.sakor.com[email protected]
Categories: Dynamometers, Test Equipment

Recent Products

Recent News

Videos


Siemens Process Industries and Drives

100 Technology Drive
Alpharetta GA 30005
 Phone: 770 740 3000Phone: 800 241 4453Fax: 678 297 8316
Contact: Product Information http://www.usa.siemens.com/industry[email protected]
Categories: CAD/CAM Software, CNC Machining Centers, Test Equipment

Recent Products

Recent News

Videos


Soundmaster Noise Control

872 S. Milwaukee
Libertyville IL 60048
United States Phone: 800-472-5952
http://www.dynotestcells.com[email protected]
Categories: Dynamometers, Test Equipment

Recent Products

Recent News

Videos


SpinTron

23444 Schoenherr
Warren MI 48089
United States Phone: 706-531-0058Fax: 586-447-0440
Contact: Jerry Pelkeyhttp://www.trendperform.com[email protected]
Categories: Test Equipment

Recent Products

Recent News

Videos


Sure Products Inc.

1119 Luke St. #111
Irving TX 75061
United States Fax: 972-986-5867
Contact: Gary Tatrohttp://www.surepro.com[email protected]
Categories: Cylinder Head Assembly/Disassembly Equip., Cylinder Head Holders, Test Equipment

Recent Products

Recent News

Videos


1 2