SEMA Hall of Fame Selects Chip Foose as 2016 Inductee - Engine Builder Magazine

SEMA Hall of Fame Selects Chip Foose as 2016 Inductee

Internationally acclaimed automotive designer and master fabricator Chip Foose has been selected by the Specialty Equipment Market Association (SEMA) as an inductee into the organization’s SEMA Hall of Fame. Foose will be honored July 29 at the SEMA Installation Gala in Pomona, CA.

pg_head_biography

Internationally acclaimed automotive designer and master fabricator Chip Foose has been selected by the Specialty Equipment Market Association (SEMA) as an inductee into the organization’s SEMA Hall of Fame. Foose will be honored July 29 at the SEMA Installation Gala in Pomona, Calif. for his outstanding career and contributions to the automotive specialty industry. This annual award is created to celebrate trendsetting icons and design mavens who have shaped and inspired the specialty-equipment market through their creativity, dignity, integrity and accomplishments.

Son of legendary custom rod builder, Sam Foose, Chip, 52, has been steeped in car design since his early childhood and he’s just as passionate about his creations today as he was then. In three decades, Chip’s style has always been one both remarkable and entirely his own. His ‘look’ innately blends tradition and technology but more than that, each of his projects contain a consistent theme that integrally speaks to each piece. He doesn’t just incorporate classic elements or technology just for the sake of doing so, he ensures that each project has an artistic, elegant and meaningful flow throughout. His designs are subtle and understated and, uniquely Chip, he starts his designs from the smallest details and then builds around it; embracing the details that speak truest to the project and then aligning every piece of the puzzle to bring his projects to complete design.

Chip’s design career has been, and continues to be, dynamic and authentic. He has been a lead customizer in Hollywood, building studio cars for films like “Blade Runner,” and “Gone in 60 Seconds.” He was handpicked by John Lassiter to join the Disney Animation and Pixar design family to contribute to the paint schemes and graphic treatments for the “Cars,” and “Cars 2” films, and those same designs are embodied, and were personally applied by Chip and his crew at Disney’s California Adventure’s “Cars Land” theme park. He has hosted and appeared on notable automotive TV shows including TLC’s “Overhaulin’” and has been the recipient of countless awards for his phenomenal designs such as winning the coveted “Ridler” Award four times at the Detroit Autorama, becoming the first recipient of the Good Guys Trendsetter Award andbuilding eight America’s Most Beautiful Roadster awarded vehicles.

“It is an honor to be acknowledged by my peers at SEMA, the organization has been immensely supportive throughout my journey as a designer and builder,” says Chip. “As 2016 marks my 30th anniversary in design this couldn’t have been a more appreciated and sentimental award for my life’s work – all I can say is thank you!”

For more information: www.sema.org.

You May Also Like

Santa Maria Speedway to Reopen

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility’s former general manager. To read the full story, visit santamariatimes.com.

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility's former general manager.

To read the full story, visit santamariatimes.com.

Trans Am Names New Technical Director for TA2

Doug Nagy comes to Trans Am as an FIA-licensed technical inspector. He previously held positions at Saleen, Bell Motorsports and Mosler Automotive.

USAC’s 2024 Hall of Fame Class

The induction ceremony will take place at USAC headquarters in Speedway, IN on September 27, 2024.

Cloyes to Acquire ATI

Cloyes has announced the acquisition of ATI, a leading front-end accessory drive pulley and tensioner supplier.

Holley Names Jordan Musser SVP of Safety and Electronics Products

Musser will lead a global team of professionals to develop and implement a comprehensive strategic growth plan for Holley’s leading portfolio of safety brands.

Other Posts

Race Winning Brands to Implement Unilateral Retail Pricing Policy

The transition to a Unilateral Retail Pricing Policy reflects Race Winning Brands’ commitment to quality and reputation of its products.

King Engine Bearings Anounces New Rebate Campaign

During the two-month duration of the campaign, customers can take advantage of a rebate of $10 for every $100 spent on qualifying pMaxKote (XPC) products by King Engine Bearings.

Candidates Announced for SEMA Board of Directors 2024 Election

Voting will take place online beginning May 28 and is open to current SEMA-member companies.

Edelbrock Group Brands Now on MidwayPlus B2B Platform

The platform is convenient for checking prices, inventory, and freight costs before placing an order.