Marine Engine Building
Inboard, outboard, jump aboard? The marine market is a profitable niche for some engine builders, but it
Thrust Bearing Failure
Thrust bearings are used to control end play in the crankshaft. End play is important because it limits the fore and aft movement of the crankshaft in the block. If an engine is assembled with too much end play in the crank, or if the thrust bearing fails, the forward movement of the crankshaft in
Valve Seat Installation Procedures
If a valve seat is damaged, cracked, loose, receded or too badly worn to be recut or reground, it can cause a variety of problems: loss of compression, valve burning, valve failure, valvetrain wear and breakage, even head and valve damage if the seat comes loose. For that reason, replacing valve seats is often necessary
Head and Block Finishes
Clean, smooth and flat. That
Weighing the Benefits of Engine Balancing
Balancing goes hand-in-hand with performance engine building. Balancing reduces internal loads and vibrations that stress metal and may eventually lead to component failure. But is it worth the time and effort for mild performance applications, everyday passenger car engines or low-buck rebuilds? From a technical point of view, every engine regardless of the application or
The Future Of Boring Is Exciting
Boring out cylinders to accept oversized pistons or sleeves has long been a common practice in the engine rebuilding business. Boring allows worn blocks to be salvaged, and stock cylinder bores to be enlarged for more displacement. More recently, boring is also being used to install special cylinder liners with hard surface treatments in high
The Smooth Science of Cylinder Honing
The basics of honing cylinder blocks hasn’t changed much in recent years, but what has changed are the type of abrasives being used by many engine builders. Silicon carbide and aluminum oxide honing stones of various grits have long been used in power honing machines and portable hones to finish cylinder bores. These types
Compromising the Seal
The head gasket is one of the most critical gaskets in an engine because it has to seal all of the combustion chambers as well as the coolant and oil passages between the head and block. The gasket has to provide a leak-free seal from the moment it is first installed, and maintain that seal
Ohc Journal Repairs
One of the advantages of an overhead cam cylinder head is that it eliminates the need for certain valvetrain components. Mounting the camshaft in the cylinder head rather than the engine block eliminates the need for lifters and pushrods. On some OHC engines, the cam lobes run directly atop the valve stems. On others, cam