In Search Of New Markets, Mike Jeffries
Looking for new markets is one of the toughest things we do, so every time the phone rings we listen for an opportunity. Most of what we find is suspect, but over the past 12 months we have rebuilt a number of compact diesels and sold a number of rebuild kits. As a result we
Heavy Duty Technology: Piston Failure Analysis
The air/fuel, coolant and oil systems and relationships between various engine operations and the cylinder liner temperatures are critical to maintaining proper operation of all cylinder components. A variety of conditions can cause excessive piston growth or melting, and each will cause varying results including catastrophic engine failure. The correct air/fuel ratio balance of
Rebuilding The Ford 3.8L Engine
They needed an economy engine that would fit in their new cars, and they needed it fast. They had a couple of old inline sixes and a small German V6, but none of them were designed for fuel economy or the coming emissions standards, and the 250 cid engine was so tall that it wouldn’t
Rebuilding the New Chevy 262
This enabled GM to shorten the development process dramatically because it was able to adapt a proven design. But it also allowed it to share a lot of the existing tooling from the V8 production lines so the engines could be on the road sooner. The original 200 V6 that came out in 1978 was
1999 Machine Shop Of The Year Award Winner: Metric Automotive Engineering Ltd
Each year, the staff at Automotive Rebuilder magazine recognizes one machine shop that displays business practices that go above and beyond the norm. This year, along with input from the Engine Rebuilders Association (AERA), we have selected Metric Automotive Engineering (Pty) Ltd., from Germiston South, Republic of South Africa. Metric was chosen from numerous entries
Forklifts
Engine rebuilders often classify themselves as an automotive (car and light truck), and/or medium duty/heavy-duty diesel or industrial rebuilder, and usually primarily stay in one market or the other. Some cross the line and do business in both markets, but most tend to stay in familiar territory where they’re comfortable. Yet rebuilding forklift engines is
Perspective On Using CBN Versus Polycrystalline Diamond (PCD) Cutters
In your June Shop Line you offered Jerry Lawson’s of DCM Tech, Inc., perspective on using CBN versus poly crystalline diamond (PCD) cutters. Have any other manufacturers voiced their opinions? In PERA’s May 1996 Current Concerns publication, Andy Rottler of Rottler Manufacturing made the following observations on CBN versus PCD cutters:Rottler says that due to