Cylinder Head Crack Repairs
It seems as if many cylinder heads are doomed to crack from the very start because of their lightweight construction and design. Aluminum overhead cam (OHC) heads, in particular, are often found to be warped as well as cracked. But so too are many pushrod cast iron heads. One of the causes of cracking in
PERA Core Corner: The Latest Update On The Great Ford 4.6L Cover Up
Back in August of 2004 I provided you with information on the front covers on the 4.6L Ford SOHC V8 engines. The data here is an update to that information with an updated chart to rapidly identify the covers. If you are using the older chart it is time to discard it and use the
Valve Guide and Seat Equipment Options
For many engine builders the bread and butter business is in cylinder head work. In fact, according to our 2005 Machine Shop Market Profile (also available at www.engine-builder.com) 41 percent of gas and 54 percent of diesel engine builders’ business comes from servicing cylinder heads. And one of the most important aspects of doing this
Coretalk: Sunnen, RMC Form Strategic Alliance To Market Equipment
This Sunnen/RMC alliance is effective immediately. RMC products will be sold under the Sunnen/RMC brand. Sunnen’s team of field engineers and service specialists will now represent and support the RMC line. “The new Sunnen/RMC branded products complement Sunnen’s existing product line,” said Mike Haughey, Sunnen’s chief operating officer. Ray Meyer, president of RMC, agreed: “The
Coretalk: Recon Automotive Founder Armand J. Mancini Dies
He leaves behind his wife of 42 years, Carole, and three sons and a daughter – Armand, Vincent, Daniel and Carrie Mancini Young. He is also survived by three brothers, a sister and six grandchildren. Mancini was an icon of the automotive remanufacturing industry, having founded Recon in 1973 and building it into one of
Coretalk: Female Engine Builders, Hear Them Roar
Clevite Engine Parts has sponsored the Clevite Engine Builder Challenge Series since 1990 and has hosted the event at industry trade shows, conferences, race tracks and open house events for customers – but this was the first build to feature women only. Sandi Holder, of Holder Automotive Machine, and Becky Tardif, of Accurate Cylinderhead Service,
Coretalk: NAPA Awards Crank Biz To Hi-Tech’s New Venture
The Hi-Tech Blueprint series crankshaft is restored to the original factory blueprint specifications. Blueprint Series crankshafts are delivered directly to NAPA stores in the U.S. on an overnight basis, including a program for Alaska and Hawaii. The company offers application coverage for more than 1,000 part numbers for auto, truck and marine. “NAPA chose this
Gen III GM Small Block Engine, LS1 Motor for Cars, Trucks
The first generation small block was revised to create the second generation LT1/LT4 that was used for some applications from ’92 to ’97, but the results didn’t satisfy the people at GM Powertrain, so they started all over in ’91 and designed a brand new small block. It’s officially called the “Gen III” motor, but
Crankshafts:Stock and Performance
The crankshaft is the working arm of the engine. All the force generated by combustion and the downward motion of the pistons is focused on the crank throws. The leverage effect of the force exerted on the crank journals twists the shaft and converts the up-and-down reciprocating motion of the pistons into rotational motion of
Engine Bearings: Stock & Performance
The importance of the engine’s bearings can’t be over-emphasized. The bearings support the crankshaft and connecting rods, and in pushrod engines also the camshaft. The bearings provide a surface for the friction-reducing oil film that allows the parts to spin without rubbing metal against metal. It’s a tough job because of the high loads created
The Latest in TIG Welding Techniques & Equipment
Like the swallows coming back to Capistrano, the monarch butterflies finding the same wintering site in Mexico generation after generation or the buzzards returning faithfully to Hinckley, OH, in my neck of the woods, I am back with an annual March update on TIG welding in general and welding aluminum cylinder heads and other engine
Coretalk: GM, DaimlerChrysler Join Forces To Produce Hybrid Automobile Engines By ’07
Although financial terms of the agreement weren’t disclosed, the collaboration is likely to involve an investment of hundreds of millions of dollars between the automakers. The first of the vehicles is to debut in 2007 – when Toyota has said it hopes its hybrid model sales will total several hundred thousand worldwide. GM, which has
Piston Ring Technology: Stock and Performance
Piston rings have one of the toughest jobs inside an engine. They’re slammed up and down between the ring lands thousands of times a minute; they’re subjected to searing temperatures and extreme pressures; and they’re constantly scraping back and forth against the cylinder walls. In spite of all of this, the rings are expected to
Planning For Failure Can Save You When It Happens
It’s an old story. A customer brings in a rebuild job and you do your normal quality job. You dot all the I’s and cross all the T’s and walk away from the engine stand knowing you’ve done a good job. The customer pays and off he goes with his prize. You make the mortgage
Not So Stock: NASCAR Motors and Their Street Counterparts
The engines in NASCAR’s newly introduced Strictly Stock class of stock car racing in 1949 were literally stock, right off the dealer’s showroom floor. Today, they’re anything but. So what happened? Evolution. Like any sport or industry, evolution has moved NASCAR racing to where it is today, a multi-million dollar business. The engines, called ‘motors’
Topline Automotive Buys, Reopens Hylift Facility, Engine Builder, August 2004
A full-line of flat mechanical tappets, lash adjusters and encapsulated hydraulic roller lifters are again being produced by the original Hylift machines and team. The previous Hylift OE lines that were in Zeeland, MI, have now been relocated to the Muskegon plant. “The same people who made ‘The Beautiful Lifter’ are back manufacturing with precision
Big-Inch Cadillac’s
While some engines are relatively rare in machine shops, the big Cadillacs have remained a consistent source of income. These engines are Cadillac’s last big hurrah at traditional big-cube, flagship GM engines. Surprisingly, they are also a scaled-down version of a V-12 engine that made it through early production and road-testing before being scrapped as
Guide and Seat Equipment
Cylinder head work has been and should continue to be a profit center for engine builders. Heads almost always require guide and seat work to restore compression and oil control. This includes drilling, reaming and replacing valve guides, removing worn, loose or damaged valve seats, cutting new seat counterbores, and machining valve seats. For performance
In Search Of New Markets, Mike Jeffries
Looking for new markets is one of the toughest things we do, so every time the phone rings we listen for an opportunity. Most of what we find is suspect, but over the past 12 months we have rebuilt a number of compact diesels and sold a number of rebuild kits. As a result we
Shop Financials
Whether the cost of an engine overhaul can be written off (expensed) or must be capitalized can make a big difference in the annual taxes that an engine