Coretalk: GM, DaimlerChrysler Join Forces To Produce Hybrid Automobile Engines By ’07
Although financial terms of the agreement weren’t disclosed, the collaboration is likely to involve an investment of hundreds of millions of dollars between the automakers. The first of the vehicles is to debut in 2007 – when Toyota has said it hopes its hybrid model sales will total several hundred thousand worldwide. GM, which has
What A Year It’s Been…What!? It’s Been A Year?
As I sit here pondering the many topics I could choose to write about for my last column of 2004, I’m suddenly struck by the unbelievable fact that it is December already! Of 2004! Where did 2003 go? What happened to April, for crying out loud? Of course, the holiday shopping days always seem to
What A Year It’s Been…What!? It’s Been A Year?
As I sit here pondering the many topics I could choose to write about for my last column of 2004, I’m suddenly struck by the unbelievable fact that it is December already! Of 2004! Where did 2003 go? What happened to April, for crying out loud? Of course, the holiday shopping days always seem to
Tractor Pulling: It’s Not Your Granddad’s John Deere Anymore
Tractor pulling has been with us for as long as there have been tractors. Farmers used to pull their horses, mules or oxen and, just as today, each bragged that he had the biggest and strongest. Today, at the top echelons of pulling, the technology is equal to anything else in motorsports. Although you won’t
What’s Hot In Performance – Cams, Lifters & Rockers
The camshaft is really the heart of every performance engine because the cam defines the engine’s breathing potential, its torque curve and peak horsepower. The camshaft controls when the valves open, how quickly they open, how far they open (with some help from the rocker arms), how long the valves are held open, and when
Can You Keep Up With The Changes In The Industry?
In this fast-paced world, keeping up with any industry can be very trying. Keeping up with the latest trends can be the difference between success and failure. Those businesses that remain successful are those that continually stay at the forefront of their chosen field. The engine rebuilding business has seen tremendous change in the past
Is There A ‘Spec Engine’Program In Your Future?
In an attempt to reduce the high cost of racing, many sanctioning bodies and racetracks are experimenting with or already using what could be described as “spec engines” or “crate engines.” General Motors was one of the first to offer a crate engine for racing, but now numerous manufacturers including Ford and Dodge have crate
Researching the Rebuilding Market for Multi-Valve Cylinder Heads
Cylinder head work has provided a good income for many of our readers over the years. All engines eventually need a valve job and guide work if they accumulate enough miles. Head work may also be needed if an engine overheats and blows a head gasket, if the head develops a crack, or an OHC
Showdown Pits Engine Builders Against Themselves
For the 1,500 members of the cheering crowd, the battle was between two teams of professional engine builders, both of which have enjoyed great success building engines for some of NASCAR’s most popular – and successful – drivers. For Lanny Barnes and Mike Maiwald, though, the real challenge wasn’t to beat the other, but NOT
Building Drag Racing Cylinder Heads
One thing every drag racer wants is to go faster – even bracket racers. There are lots of ways to shave tenths of seconds and even whole seconds off an elapsed time. It all comes down to how much money the racer is willing to spend in his quest for speed. One way to go
Sprint Car Motors
While the World of Outlaws, the All Stars, and USAC are the most well known of the sprint car racing organizations in this country, there are nearly fifty organizations that sanction sprint car racing. In addition, that doesn’t take into account the racetracks throughout the country that have their own division of sprint cars. Although
Pushrods – Key To Performance
Pushrods are the weakest link in the upper valvetrain. Pushrods transfer and redirect the upward motion of the lifters, which goes in one direction, to the rocker arms which move in another direction. Consequently, they are subjected to bending forces as the load and engine speed increases. For stock engines, mild steel stock pushrods are
What’s Wrong With Our Industry
What’s wrong with the engine building industry today? It’s a simple question that has no simple answer. Like many other – if not every – industry facing difficult times, the factors impacting this market are varied, complex and frustratingly hard to pin down. Are the woes of the industry the fault of customers or suppliers?
Nationwide Warranties
The competition faced by engine builders has never been tougher. There seems to be no end to the new car incentives that the manufacturers can dream up in order to continue the torrid pace of new car sales. This factor, along with consumer perceptions of improved OEM engine quality and performance, several years ago was
Conferences And Seminars Offer Many Potential Rewards
Getting away from the day-to-day grind and going to a seminar or conference with fellow shop owners and machinists has rewards that far outweigh the expense, and often may even present new business opportunities. At the Engine Rebuilders Association Tech Expo (AERA) I attended this past April in Indianapolis, a presentation given by John DeBates,
Leading Off
The first part of our annual two-part series detailing the custom engine rebuilder/machine shop market begins on page 26. But, as with any national survey, sometimes it is difficult to find the real meaning behind the numbers. My insight is based on not only the survey results, but also ongoing conversations, meetings and industry events
Seizing an Opportunity – Ed Davis, Waterhouse Motors
Ed Davis’ first love was motorcycles. Beginning with motocross and taking up cross country racing later on, the Tacoma, WA, native found he had a natural ability and excelled at the two-wheeled sport. During high school and vocational industrial machinist training, Davis hoped to try the professional circuit before age got ahead of him. But,
Matt
Matthew and Daniella Schroeder know what it’s like to make something out of nothing. They have managed to turn Matt’s Motor Worx, located in Montevideo, MN, into a diverse and thriving business that started with just four bare walls. Matt learns a lot from owning and driving a late model dirt stock car, and this
Dirt Track Dollars In the Shop and On the Track With Malcuit Racing Engines
It’s sometimes said that racers have motor oil or high octane racing fuel in their blood. Fearless drivers are accused of having ice-water running through their veins. For Strasburg, OH’s Brad Malcuit, the most likely ingredient pumping through his bloodstream is dirt, a fact he’ll happily attribute to family heritage. Malcuit is owner of Malcuit’s
It’s A Tough Market
Is this a tough market to do business in? You bet it is. Will business ever be what it once was when small block Chevy engines fit into almost every GM car, and machine shops had an abundance of both work and customers? Not likely. Will the quality of engines continue to improve, lengthening the