What’s Wrong With Our Industry
What’s wrong with the engine building industry today? It’s a simple question that has no simple answer. Like many other – if not every – industry facing difficult times, the factors impacting this market are varied, complex and frustratingly hard to pin down. Are the woes of the industry the fault of customers or suppliers?
The Smooth Science of Cylinder Honing
The basics of honing cylinder blocks hasn’t changed much in recent years, but what has changed are the type of abrasives being used by many engine builders. Silicon carbide and aluminum oxide honing stones of various grits have long been used in power honing machines and portable hones to finish cylinder bores. These types
Little Engines, Big Money
For the rebuilding facility familiar with typical automotive or heavy-duty engines, the small displacement, four-cycle, air-cooled engine may seem insignificant. After all, these one-cylinder motors, which may produce just 5 hp, are found in lawn mowers, rototillers and kiddy go karts, for cryin’ out loud! Although the small four-cycle engines from Briggs & Stratton, Tecumseh,
Ford 4.0L V6 Engine
The original 2.6L engine was replaced by the 2.8L, which was upgraded to the 2.9L and then finally bored and stroked to make it into the 4.0L that was used in the Rangers, Aerostars and Explorers starting in 1990. It was replaced by a SOHC engine from this same family at the end of model
Grinding Techniques: In Thousands Of Years, The Basics Of Grinding Haven’t Changed
Grinding is one of the oldest methods known for shaping and sharpening objects. It was first used in prehistoric times to make weapons and other tools by rubbing wood, stones, bones and eventually metal against hard, abrasive rocks. In thousands of years, the basics of grinding haven’t changed. We’re still rubbing an abrasive against metal