Rebuilt Market Reviews – Engines Market
Total engines remanufactured by all production engine remanufacturers (PERs) in 1995 increased a modest 3.5%, growing to 1.318 million units last year compared to 1.273 million units produced in 1994. Production totals are based on a U.S. and Canadian universe of 120 PERs that produced an average of 10,609 remanufactured engines annually in 1995. Survey
Rebuilt Market Reviews – Cores Market: The Perfect Example Of Supply And Demand
In some businesses, the classic law of supply and demand is hard to identify. But that’s not the case in the core business. “The core market is the perfect example of supply and demand,” comments John Lathan, plant engineer at The Hastings Co., a rebuilder in King, NC. “When one company is looking for a
Rebuilt Market Reviews – Electronics Market
If flexibility and the ability to quickly diversify are the marks of a successful rebuilder, then Denver, CO-based electronics rebuilding specialists, cciUPTIME, was destined for this industry. cciUPTIME remanufactures electronic control modules (ECMs) for Mercedes-Benz and other high-end import vehicles. These units include everything from on-board computers to climate control, cruise control, idle speed control,
Rebuilt Market Reviews – Brakes Market: Rebuilders And Suppliers Chant The Same Mantra
When it comes to current trends in the brake rebuilding market, rebuilders and suppliers chant the same mantra – “price” and “quality.” Both are the primary forces driving parts and equipment suppliers’ and rebuilders’ business. Consumers demand the best performing materials, but of course, at the lowest possible price. Unfortunately, say many rebuilders and their
Rebuilt Market Reviews – Electrical Market
Though the overall demand for rebuilt alternators and starters continues to be relatively soft, particularly in the Midwest and Northeastern parts of the United States, sales, in general, have been up in the South. Weather seems to play a major role in driving the demand for electrical products. Cold winters are hard on starters and
The 1995 Camaro That Served As The Basis For Project Road Rocket
As noted previously, the 1995 Camaro that served as the basis for “Project Road Rocket” received a change in rear end gearing and that, in combination with the repair of an exhaust system leak really brought the car to life.From a best quarter-mile performance of 12.87 at 109.27 miles per hour the Camaro blasted to
Cv Market Travels Fast Track: Power To The Front Wheels Is The Drive System Of The Present And Future
Although sport utility vehicles, many still with rear wheel drive, are the hot sellers right now, few will dispute that power to the front wheels is the drive system of the present and future. A market for rebuilt front wheel drive axles and CV joints will be around for a long, long time. With few
Engine Installation – A Growing Opportunity?
Engine rebuilders who are looking to expand their share of themarket may want to consider engine installations. Although somerebuilders may think installations are better left untouched,others are finding installations provide a profitable niche ina competitive market. Terry O’Donnell, manager of RPM Engines andMachines, Rohnert Park, CA, is just one of many rebuilders inthe industry who
What Is The Recommended Surface Finish
Shop Line, Automotive Rebuilder, July 1996 Q A In the Production Engine Remanufacturers Association’s (PERA) May 1996 edition of Current Concerns, Ed Keibler of Sunnen Products Co., St. Louis, MO, says that the typical Ra finish on cast iron should be 60 to 110 Ra. On aluminum cylinder heads it is much smoother – typically
Cam Timing Chain Marks On 1976-’88
The Automotive Engine Rebuilders Association (AERA) offers the following information regarding cam timing chain marks on 1976-’88 Isuzu 1.8L and 1.9L engines. Confusion may begin when reading the service manual information referencing marked plates on the cam timing chain. Apparently, some aftermarket timing chains don’t have the marked plates which indicate the correct positioning for
Rules & Regs: There Are Numerous Annual And Semi-Annual Reports That Are Required Of Any Firm That Uses Or Purchases Regulated Chemicals And Materials
Depending on location, there are numerous annual and semi-annual reports that are required of any firm that uses or purchases regulated chemicals and materials. In addition to the actual reports, there are voluminous records that must be maintained and annual calculations performed to demonstrate compliance. Many firms do not believe that these reports and records are important, that they just add
Turn of the Wheel: Automotive Parts Rebuilders Association (APRA) CV and Rack Clinic
Once again the Automotive Parts Rebuilders Association (APRA) CV and Rack Clinic held May 4-5 in Chicago, was a huge success.Rich Lovely of Powerline, Inc., Roebuck, SC, and chairman of the APRA clinic did a fantastic job recruiting speakers and handling the many program details. The topic on grinding did not seem as heated as
Lane Parts Co.: Many Rebuilders Are In A State Of Transition
It seems that many rebuilders are in a state of transition. Whether it’s due to changing ownership, technology, products or markets, almost all machine shops and engine rebuilders are facing increasing competition in an increasingly consolidated market. Lane Parts Co., Eugene, OR, Automotive Rebuilder’s 1996 Machine Shop of the Year, is no exception. This Northwest
Machine Shop Performance: This Month We Complete Our Extensive Market Profile
Part I of last month’s profile of the machine shop market revealed that engine production in business year 1995 was almost identical to that recorded in 1994. Based on a universe of 6,000 to 8,000 full-service machine shops, custom engine rebuilders produced between 1.4 million to 1.87 million engines in 1995. Last month’s data provided