Bosch Online Learning Portal Adds New Virtual Garage Skills Assessment Program - Engine Builder Magazine

Bosch Online Learning Portal Adds New Virtual Garage Skills Assessment Program

Robert Bosch LLC has announced the addition of Bosch 2D Virtual Garage, an interactive training and skills assessment resource, to its Bosch Online Learning Portal. Technicians and vocational students can access Virtual Garage now at AviOnDemand.com/Bosch-Virtual-Garage.

Robert Bosch LLC has announced the addition of Bosch 2D Virtual Garage, an interactive training and skills assessment resource, to its Bosch Online Learning Portal. Technicians and vocational students can access Virtual Garage now at AviOnDemand.com/Bosch-Virtual-Garage.

In the Bosch 2D Virtual Garage, participants working with common diagnostic tools typically found in a standard repair shop are faced with a specific fault and will attempt to diagnose the issue on a virtual vehicle. The vehicle is equipped with a 2.5-liter gasoline direct injection (GDI) engine. Specific parts can be selected on a schematic board, the diagnostic data associated with that part can be reviewed, and the participant can then decide which part is the source of the fault.

Once the diagnosis phase is complete, the parts department can be opened and service parts selected and installed. Finally, a virtual road test will determine if the vehicle has been repaired.

Skills will be measured throughout the exercise using a real time clock. Once the repair is complete, participants can compare their results against the standard time needed to complete the fault, and can retry the challenge to better understand the diagnostic process. The program provides exposure to a variety of diagnostic tools and test processes, some of which may not be familiar to the participant, offering the opportunity for additional learning. Experience working on a GDI engine is also valuable as one-fourth of all vehicles worldwide will be equipped with a GDI system by 2020. Bosch is the innovation leader in GDI technology, which is key for clean and economical engines, fuel economy and emissions reductions.

“Providing resources such as the Bosch Virtual Garage helps technicians assess and improve their skills and in turn, more efficiently and accurately service their customers’ vehicles in the shop,” said Bob Pattengale, manager, training and hotline, Bosch Automotive Aftermarket North America. “Through the Bosch Online Learning Portal, an expansive collection of content is conveniently accessible on demand 24/7/365 for those looking to improve their knowledge and skills.”

The Bosch 2D Virtual Garage Fault One scenario is currently available at no charge. Additional scenarios will be added in the months ahead for a nominal charge.

In addition to the Bosch Online Learning Portal, Bosch also offers hands-on training courses in a classroom or garage setting at facilities around the country, and product support materials such as technical books, videos and posters.

For more information: BoschTechInfo.com.

You May Also Like

Santa Maria Speedway to Reopen

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility’s former general manager. To read the full story, visit santamariatimes.com.

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility's former general manager.

To read the full story, visit santamariatimes.com.

Trans Am Names New Technical Director for TA2

Doug Nagy comes to Trans Am as an FIA-licensed technical inspector. He previously held positions at Saleen, Bell Motorsports and Mosler Automotive.

USAC’s 2024 Hall of Fame Class

The induction ceremony will take place at USAC headquarters in Speedway, IN on September 27, 2024.

Cloyes to Acquire ATI

Cloyes has announced the acquisition of ATI, a leading front-end accessory drive pulley and tensioner supplier.

Holley Names Jordan Musser SVP of Safety and Electronics Products

Musser will lead a global team of professionals to develop and implement a comprehensive strategic growth plan for Holley’s leading portfolio of safety brands.

Other Posts

Race Winning Brands to Implement Unilateral Retail Pricing Policy

The transition to a Unilateral Retail Pricing Policy reflects Race Winning Brands’ commitment to quality and reputation of its products.

King Engine Bearings Anounces New Rebate Campaign

During the two-month duration of the campaign, customers can take advantage of a rebate of $10 for every $100 spent on qualifying pMaxKote (XPC) products by King Engine Bearings.

Candidates Announced for SEMA Board of Directors 2024 Election

Voting will take place online beginning May 28 and is open to current SEMA-member companies.

Edelbrock Group Brands Now on MidwayPlus B2B Platform

The platform is convenient for checking prices, inventory, and freight costs before placing an order.