Kansas Passes SEMA-Supported Legislation Protecting Rights of Car Owners and Restorers - Engine Builder Magazine

Kansas Passes SEMA-Supported Legislation Protecting Rights of Car Owners and Restorers

 SEMA (Specialty Equipment Market Association) applauds Kansas lawmakers for passing H.B. 2594, “Exempting certain modifications on antique vehicles from vehicle identification number offense seizures and dispositions,” as a critical step forward in protecting the rights of restorers and owners of classic vehicles in the state.

The catalyst for the legislation came from an automotive enthusiast in Kansas who purchased his dream car in 2017 – a 1959 Corvette convertible – from a dealership across state lines in Indiana. When he tried to register the car back home in Kansas, the Kansas Highway Patrol seized it as “contraband.” According to Kansas state law at the time, the Corvette must be crushed and has been sitting in a Topeka impound lot ever since, while the owner pleads his case in the state court system.

Under the previous Kansas law, police were required to seize and destroy any car on which the vehicle identification number (VIN) “has been destroyed, removed, altered or defaced.” There was no exception for a car lawfully purchased by someone who had no reason to be aware of its VIN issues. In the case of this 1959 Corvette, the dashboard VIN plate had been removed years ago during the car’s restoration and reapplied with new rivets.

Upon learning of the case in late 2021, SEMA worked with Kansas Rep. Leo Delperdang to introduce H.B. 2594 and prevent this from happening again. The new law protects restorers and owners of classic vehicles while not impeding law enforcement from carrying out their duties. It clarifies that a VIN may be removed from an antique vehicle “if the removal and reinstallation are reasonably necessary for repair or restoration unless the person knows or has reason to know that the antique vehicle is stolen.”

The bill cleared both the Kansas House and Senate unanimously and has now been signed into law by Gov. Laura Kelly. It can be viewed in its entirety here.

While an extreme case, the Kansas enthusiast’s experience prompted SEMA to begin evaluating other states’ language to help ensure this severe incident remains an isolated occurrence. The process seeks to add clarification to similar existing laws to protect classic car restorers and owners.

In Arizona, SEMA-supported legislation (H.B. 2480) has been introduced to allow complete restoration of pre-1981 vehicles, including temporary removal of the VIN when necessary. H.B. 2480 changes existing law to allow the removal and reinstallation of a VIN on pre-1981 vehicles if reasonably necessary for repair or restoration. Prior to the new bill, enthusiasts who intentionally removed or altered a VIN, regardless of reason or vehicle model year, were guilty of a felony.

The Arizona bill passed the legislature and awaits approval or veto by Gov. Doug Ducey. The bill can be viewed here.

These bills are just two examples of the work SEMA undertakes every day to protect the automotive hobby and our freedom to pursue them. To learn more about SEMA’s legislative activities, visit www.semasan.com.

You May Also Like

Santa Maria Speedway to Reopen

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility’s former general manager. To read the full story, visit santamariatimes.com.

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility's former general manager.

To read the full story, visit santamariatimes.com.

Trans Am Names New Technical Director for TA2

Doug Nagy comes to Trans Am as an FIA-licensed technical inspector. He previously held positions at Saleen, Bell Motorsports and Mosler Automotive.

USAC’s 2024 Hall of Fame Class

The induction ceremony will take place at USAC headquarters in Speedway, IN on September 27, 2024.

Cloyes to Acquire ATI

Cloyes has announced the acquisition of ATI, a leading front-end accessory drive pulley and tensioner supplier.

Holley Names Jordan Musser SVP of Safety and Electronics Products

Musser will lead a global team of professionals to develop and implement a comprehensive strategic growth plan for Holley’s leading portfolio of safety brands.

Other Posts

Race Winning Brands to Implement Unilateral Retail Pricing Policy

The transition to a Unilateral Retail Pricing Policy reflects Race Winning Brands’ commitment to quality and reputation of its products.

King Engine Bearings Anounces New Rebate Campaign

During the two-month duration of the campaign, customers can take advantage of a rebate of $10 for every $100 spent on qualifying pMaxKote (XPC) products by King Engine Bearings.

Candidates Announced for SEMA Board of Directors 2024 Election

Voting will take place online beginning May 28 and is open to current SEMA-member companies.

Edelbrock Group Brands Now on MidwayPlus B2B Platform

The platform is convenient for checking prices, inventory, and freight costs before placing an order.