Why You Should Be Bleeding Lifters - Engine Builder Magazine

Why You Should Be Bleeding Lifters

In this episode of Danny Soliz Says, Danny talks about lifter preload and how to avoid issues with your lifters and valvetrain components by making sure you bleed your lifters prior to reassembly.

You May Also Like

Chris Patterson Shows Us Around Unrivaled Diesel

Chris Patterson has become one of our favorite diesel engine builders and competitors out there over the last few years. He tells it like it is and doesn’t hold back, and he’s also a pretty good guy who recently gave us some time to check out his Weatherford, TX-based diesel shop called Unrivaled Diesel, where

Unrivaled Diesel

Chris Patterson has become one of our favorite diesel engine builders and competitors out there over the last few years. He tells it like it is and doesn't hold back, and he's also a pretty good guy who recently gave us some time to check out his Weatherford, TX-based diesel shop called Unrivaled Diesel, where his team specializes in Dodge Cummins engine, transmission and truck work! Enjoy the shop tour!

There’s More Than Meets the Eye to Connecting Rods

We talk about the ins, the outs and the latest on connecting rods, and what Callies has been doing to push that engine component forward.

Callies connecting rods
Richard Guido’s Turbocharged 521 cid Pontiac Engine

Known by many as the Canadian Chuck Norris, Richard Guido has been a staple of the drag-and-drive scene for a long time. Not only does his Pontiac GTO, boasting a turbocharged 521 cid Pontiac engine, drive literally everywhere, the car gets it done on the track as well having won back-to-back Sick Week Stick Shift

Pontiac engine
Wagler’s CX Billet 6.7L Cummins Engine

We caught up with Jeremy Wagler of Wagler Competition Products at the 2023 PRI Show, where he had two new billet engines to show us. One was a Duramax, and the other was this Wagler CX – a billet 6.7L Cummins-based engine that was designed with specific enhancements over a factory Cummins block for drag

Wagler CX
Turbocharged 414 cid L8T Engine in a Honda S2000

As we’ve mentioned in other Sick Week interviews, there aren’t tons of import cars at the annual drag-and-drive event in Florida, so when we see something like RC Flint’s Honda S2000, we take notice. Upon further investigation, RC opted to forgo the 4-cylinder for a 414 cid L8T engine, and we got the full scoop

L8T engine
Other Posts
Jesel Shaft Mount Rocker Systems

Explore Jesel’s Sportsman and Pro Series rockers, available in both aluminum and steel.

Jesel rocker arms
Crower EnduraMax Roller Lifters

Available in all popular sizes and comes standard with Crower’s High Pressure Pin Oiling to help keep the roller and shaft lubricated.

Crower roller lifter
DRZA Auto is a JDM and Nissan Playground

We first spoke to Derek and Rita Cho-Sam back in 2020 for our Engine of the Week series, and quickly came to realize that their shop, DRZA Auto, did some awesome work on Nissan cars and engines. While DRZA will take on other JDM work, the Nissan stuff is where Derek shines as a master

DRZA Auto
QualCast to Add Seattle Location

QualCast will now have a location in Sumner, WA. The facility is 6,000 square feet and will better serve the company’s Northwest customers.