We’ve visited Tony and the boys at Concord Engines before. The Kannapolis, NC-based shop does engine and machine work on a ton of different platforms. While we were there this past summer, Tony has a 5.3L LS engine getting rebuilt. The shop has three different variations it can do with this combo – stock, street fighter, and mighty mouse. It’s our Engine of the Week!
During a visit to Pro Motor Engines in Mooresville, NC, we were fortunate to line up our time at the engine shop while one of Clay Millican’s Top Fuel Hemi engines was in for machine work and a rebuild. PME Owner Dennis Borem walked us through the details of this 12,000 HP Top Fuel engine
During a visit to Pro Motor Engines in Mooresville, NC, we were fortunate to line up our time at the engine shop while one of Clay Millican's Top Fuel Hemi engines was in for machine work and a rebuild. PME Owner Dennis Borem walked us through the details of this 12,000 HP Top Fuel engine for Rick Ware Racing, and it's our Engine of the Week.
Even before Noonan Race Engineering completed its new Engine Technology Facility, this was an engine shop we’ve been wanting to see inside for quite a while. If you’re at all familiar with Noonan Race Engineering, its engines and its components, then you already know it’s the the kind of stuff billet aluminum racing dreams are
We couldn’t highlight just one engine during our visit to Gibbons Motorsports earlier this year. This small block Chevy UMP dirt modified engine was also coming together in the assembly room of the Mooresville, NC-based engine machine shop. Shop owner Pete Gibbons told us all about it for our Engine of the Week. Related Articles
Nick Cogar works at Diesel Power Parts & Machine, an engine machine shop located in Missoula, Montana. The shop mainly focuses on remanufacturing engine blocks, cylinder heads, crankshafts, and connecting rods among other engine machine processes. Related Articles – Rottler Report with Logan Vass of Almax Engine Rebuilders – Pat Musi Gives a Tour of
During the 2023 Ultimate Callout Challenge, we went by the Kill Devil Diesel booth to say hey to owner Jared Alderson, and when we got there, we were treated to the sights of a custom-built 1962 Country Squire wagon with a compund turbo 6.0L Powerstroke engine built by Kill Devil Diesel. Kodie Boden of Acme
Elgin PRO-STOCK conical valve springs help stabilize valvetrain dynamics and provide superior damping without wear.
If you’re looking for a tried and proven big block Chevy combo that can make 150 passes without damage – look no further than this 632 cid big block Chevy nitrous build done by Pat Musi of Musi Racing Engines. It’ll deliver 1,250 horsepower NA all day long!
Utilizing a unique block, a particular cylinder head and manifold combination and some parts from an old Pro Stock truck engine, Sandy Wilkins of Wilkins Racing Engines built his customer a 347 cid small block Chevy engine for Comp Eliminator that should make 2.88 horsepower per cubic inch! Check it out!
As drag-and-drive events continue to emerge and grow in popularity, more and more competitors are looking to up their cars’ performance levels on both the track and street. That’s exactly why this particular customer came to Pete Harrell and Harrell Engine & Dyno for a 540 cubic inch billet big block Chevy engine build. Check it out!
