Engine of the Week is presented by
Stopping into Wilkins Racing Engines in Mooresville, NC was one of our favorite stops during our Charlotte trip earlier in 2023. Owner Sandy Wilkins showed us around his machine shop and gave us the details of a few engine builds like this Comp Eliminator 347 cid small block Chevy. It’s our Engine of the Week!
During this past summer’s Ultimate Callout Challenge, we came across CNC Fabrication’s booth and got the chance to speak with owner Corey Hurtt about his business and the brand-new 7.3L Powerstroke engine they built. The engine was just finished at the time, but Corey had plans to eventually run the truck in the ODSS 5.90
During this past summer's Ultimate Callout Challenge, we came across CNC Fabrication's booth and got the chance to speak with owner Corey Hurtt about his business and the brand-new 7.3L Powerstroke engine they built. The engine was just finished at the time, but Corey had plans to eventually run the truck in the ODSS 5.90 index class. It's our Diesel of the Week!
Pete Harrell of Harrell Engine & Dyno in Mooresville, NC specializes in forced induction builds and “polishing turds,” as he likes to put it. He got this build extra polished, as it features a 540 cubic inch billet aluminum big block Chevy block for drag-and-drive events. Hear what else went into the build directly from
During a visit to Pro Motor Engines in Mooresville, NC, we were fortunate to line up our time at the engine shop while one of Clay Millican’s Top Fuel Hemi engines was in for machine work and a rebuild. PME Owner Dennis Borem walked us through the details of this 12,000 HP Top Fuel engine
Even before Noonan Race Engineering completed its new Engine Technology Facility, this was an engine shop we’ve been wanting to see inside for quite a while. If you’re at all familiar with Noonan Race Engineering, its engines and its components, then you already know it’s the the kind of stuff billet aluminum racing dreams are
We couldn’t highlight just one engine during our visit to Gibbons Motorsports earlier this year. This small block Chevy UMP dirt modified engine was also coming together in the assembly room of the Mooresville, NC-based engine machine shop. Shop owner Pete Gibbons told us all about it for our Engine of the Week. Related Articles
There’s a lot of impressive engines that come out of Noonan Race Engineering in Spartanburg, SC. But, the 4.8″ bore space billet Hemi engine was the one that started it all for the high-performance engine and machine shop. Check out the details of this water block 4.8″ bore space billet Hemi.
Wyatt Stengel’s 1970 GMC K15 is a cherished family heirloom. However, that didn’t stop him from turning it into a drag racing powerhouse thanks to an upgraded LB7 Duramax engine. Check out what went into the four-year project that blends aesthetics and horsepower.
Born with no arms, Stutzman drag races competitively using his feet.
Like any sensible diesel guy, Chris Voorheis got a small taste of diesel performance and immediately wanted more. His 2006 Mega Cab went from a daily driver to a sled puller to now a formidable drag racing vehicle thanks to a compound-turbo “Shredder” 5.9L Cummins from Industrial Injection. Check out what went into the build!
