Mazda to Race with New MZ-2.0T Engine - Engine Builder Magazine

Mazda to Race with New MZ-2.0T Engine

The two-car Mazda Prototype race team will be powered by the new gasoline-fueled MZ-2.0T engine this season in the IMSA WeatherTech SportsCar Championship. The engine has been in development for much of the past year and has completed nearly 4,000 test miles.

_SM_0400
The two-car Mazda Prototype race team will be powered by the new gasoline-fueled MZ-2.0T engine this season in the IMSA WeatherTech SportsCar Championship. The engine has been in development for much of the past year and has completed nearly 4,000 test miles prior to the “ROAR before the 24” test session at the Daytona International Speedway.
The MZ-2.0T earned its name from its configuration: “MZ” refers to Mazda, “2.0” references its two-liter capacity, while “T” is a nod to the turbocharger. The inline, four-cylinder engine is built upon a similar foundation of the MZR-R engine that was developed by Mazda and Advanced Engine Research Ltd. (AER) for sports car racing beginning in 2006. In addition to the new Prototype engine, Mazda works with AER on the current version of the MZR-R engine that powers the entire field in the Indy Lights series, the top rung of the Mazda Road to Indy.
John Doonan, Director, Mazda Motorsports North America
“We gained immense knowledge from three years of racing a stock-block diesel engine. That knowledge will improve the next generation of Mazda diesel engines. But, with the impending rules changes in 2017 [which will not allow a diesel-fueled option], a purpose-built racing engine was our best choice to reach our long-term goals and contend for race wins and championships. After extensive testing, the MZ-2.0T is not only very fast, but reliable as well. There was no off-season for this team, as they’ve worked incredibly hard to prepare for the season. Mazda loves to race, and we couldn’t be more optimistic about the prospect of this engine and our team.”
Jonathan Bomarito, Driver, Mazda Prototype team
“The drivability of the engine is incredible. The first thing you notice is how smooth the power is delivered in every gear through the RPM range. There is great low-end torque with zero turbo-lag, which is very impressive. All race tracks are different and the gearing is never perfect for every corner, so having an engine where you can short-shift or stretch a gear longer is very important. The MZ-2.0T does this easily.”
Marcus Shen, Chief Engineer, Mazda Prototype team
“This engine has transformed everything for us. Obviously, it’s more powerful so we’re going faster. Once you go faster, the aerodynamics work very differently – we have much more downforce – and the chassis works better. It’s not just straightaway speed, the engine has improved every aspect of our overall performance.
“A gasoline, direct-injected engine – like many of the Mazda passenger cars – helps with the horsepower and throttle response and yet still produces great fuel economy. When the driver puts the pedal down, it goes. It’s creating roughly 285 horsepower per liter, which is much higher than the estimated 110 horsepower per liter of the 5.5-liter V8 Daytona Prototype engines.”
The Mazda Prototype team features two entries: the No. 55 car (numbered in honor of the 25th anniversary of Mazda’s Le Mans victory) with drivers Jonathan Bomarito and Tristan Nunez, and the No. 70 car with Joel Miller and Tom Long driving. For the Rolex 24, current Indy Lights champion Spencer Pigot will join the No. 55 team, while Ben Devlin will return to the team to drive the No. 70.
Specifications: MZ-2.0T Engine
  • Capacity: 2 liters
  • Cylinders: 4 inline cylinders
  • Horsepower: approximately 570 horsepower (285 HP per liter)
  • Maximum RPM: 9,000
  • Injection: Direct injection, multi-hole, spray guided injectors
  • Fuel Rail Pressure: More than 1,500 PSI
  • Compression Ratio: 13.5:1
  • Peak Manifold Pressure: 2.6 bar (37.7 PSI)
  • Turbocharger: single Garrett Motorsports unit, 46mm restrictor
  • Exhaust Manifold: tubular 4-2-1 manifold
  • Intake Manifold: bespoke carbon fiber
  • Oiling System: bespoke dry sump system
  • ECU:  LIFE engine management ECU

You May Also Like

Santa Maria Speedway to Reopen

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility’s former general manager. To read the full story, visit santamariatimes.com.

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility's former general manager.

To read the full story, visit santamariatimes.com.

Trans Am Names New Technical Director for TA2

Doug Nagy comes to Trans Am as an FIA-licensed technical inspector. He previously held positions at Saleen, Bell Motorsports and Mosler Automotive.

USAC’s 2024 Hall of Fame Class

The induction ceremony will take place at USAC headquarters in Speedway, IN on September 27, 2024.

Cloyes to Acquire ATI

Cloyes has announced the acquisition of ATI, a leading front-end accessory drive pulley and tensioner supplier.

Holley Names Jordan Musser SVP of Safety and Electronics Products

Musser will lead a global team of professionals to develop and implement a comprehensive strategic growth plan for Holley’s leading portfolio of safety brands.

Other Posts

Race Winning Brands to Implement Unilateral Retail Pricing Policy

The transition to a Unilateral Retail Pricing Policy reflects Race Winning Brands’ commitment to quality and reputation of its products.

King Engine Bearings Anounces New Rebate Campaign

During the two-month duration of the campaign, customers can take advantage of a rebate of $10 for every $100 spent on qualifying pMaxKote (XPC) products by King Engine Bearings.

Candidates Announced for SEMA Board of Directors 2024 Election

Voting will take place online beginning May 28 and is open to current SEMA-member companies.

Edelbrock Group Brands Now on MidwayPlus B2B Platform

The platform is convenient for checking prices, inventory, and freight costs before placing an order.