Motor Service, Inc.: Brian Casey, Incoming Engine Rebuilders Association (Aera) Chairman
What do you do after graduating from WorcesterPolytechnic Institute in Worcester, MA, with a degree in managementengineering? Why, run a heavy duty machine shop and service repairbusiness, of course. Well, maybe not always. But that is the wayit has turned out for Brian Casey, incoming Engine RebuildersAssociation (AERA) chairman and one of the guiding hands
Mopar Engine Platforms – 318, 360
Chrysler Corp. hasn’t built a rear wheel drive, V8-powered car (with the exception of the Viper) since the turn of the decade. And the cars that harbored V8s beneath their hoods during the late 1980s were about as appealing to performance enthusiasts as the front-wheel driven vehicles that replaced them. In spite of that fact,
Performance Marine Engines – Meeting Customer Expectations
Life is a series of compromises. Human relations almost alwaysinvolves compromises of some sort. You want Chinese for dinner,she wants Italian; something has to give. Even if you go yourseparate ways, it’s a compromise and a decision to not dine together. Believe it or not, it’s the same with machinery. Any exercisein design is a
Waste Minimization: Ways To Reduce, And Even Eliminate, Hazardous Wastes From Your Cleaning Process
Managing your shop’s wastes shouldn’t be hazardous to your business.Although there is a lot involved with managing wastes from cleaningoperations including operating costs to disposal requirements,the good news for rebuilders is that there are ways to reduce,and even eliminate, hazardous wastes from your cleaning process. According to the Environmental Protection Agency (EPA), materialsand wastes of
Valvetrains: Better Materials & Design
Pushrods would seem to be an endangered species these days, atleast as far as most new engine designs are concerned. The onlybrand new engines built in recent years with a pushrod valvetrainhave been Chrysler’s 8.0L V10 for the Viper and Dodge Ram, andGeneral Motors new "LS1" 5.7L small block V8. All therest have either been
Niche Market Opportunities
In today’s highly competitive market, it makes sense to constantlybe on the lookout for new opportunities. Information on the marketsdescribed in this article may provide some new business prospectsfor those shops not already involved with them. However, rebuildersshould constantly be prospecting for other niche markets for theirexisting products or services. There are potentially many products
Blasting Technology: This Cost-Effective Cleaning Procedure Has Improved
When it comes to parts cleaning by blasting,the idea of propelling abrasives at parts to clean them of rust,carbon, paint or other difficult contaminants is a simple one.But the technology involved with this cost-effective cleaningprocedure has improved, and rebuilders can take advantage of manyoptions to eliminate out-dated, labor-intensive cleaning practicesin the shop. Scott Christiansen of
7CleanCsts.doc
So it’s important to remember when deciding on a specific approach to cleaning to strive for cleaning effectiveness, while at the same time, staying in compliance with Environmental Protection Agency (EPA) and Occupational Safety and Health Administration (OSHA) regulations. In order for a machine shop to have a positive return on investment, cleaning systems and
Rebuilt Market Reviews – Electronics Market
If flexibility and the ability to quickly diversify are the marks of a successful rebuilder, then Denver, CO-based electronics rebuilding specialists, cciUPTIME, was destined for this industry. cciUPTIME remanufactures electronic control modules (ECMs) for Mercedes-Benz and other high-end import vehicles. These units include everything from on-board computers to climate control, cruise control, idle speed control,
Letters: Test Data For Failing Rectifiers Requested
The article by Donald Yuhas, “Dissecting CS-130 Diode Failure,” in the May, 1996 issue of Automotive Rebuilder gave electrical rebuilders insights into the ways that diodes can fail. The author concluded that high “current pulse” technology is needed for successful screening-out of diodes that will likely fail in the vehicle.While I share that conclusion, the