Coretalk: Recon Automotive Founder Armand J. Mancini Dies
He leaves behind his wife of 42 years, Carole, and three sons and a daughter – Armand, Vincent, Daniel and Carrie Mancini Young. He is also survived by three brothers, a sister and six grandchildren. Mancini was an icon of the automotive remanufacturing industry, having founded Recon in 1973 and building it into one of
PERA’S Core Corner: Looking For Leakers In Ford’s Duratec 3.0L Engines
Living in a home that was built in 1910 is a bit like living in a piece of history, and the character that goes along with it is truly fulfilling. Yet a home this old does bring its own challenges, so during the past month or so I have been replacing the remaining cast iron
Performance Pistons
Piston manufacturers are introducing new performance pistons for all of these applications as well as refining existing piston designs to reduce weight, and improve strength, durability and ring sealing. Piston design and manufacturing used to be a relatively low-tech process. Now, with the aid of finite element analysis and other computer modeling techniques, many aftermarket
Coretalk: Female Engine Builders, Hear Them Roar
Clevite Engine Parts has sponsored the Clevite Engine Builder Challenge Series since 1990 and has hosted the event at industry trade shows, conferences, race tracks and open house events for customers – but this was the first build to feature women only. Sandi Holder, of Holder Automotive Machine, and Becky Tardif, of Accurate Cylinderhead Service,
Machine Maintenance: When Spring Is In The Air, Cleaning Is In The Shop
It’s that time of year again. The racing season is underway. Spring is here and hopefully your shop is getting busier. Before it gets too hectic, it’s time to do some spring cleaning in your shop. The first stop is the first place your customers will see – the front counter. Get rid of any
Gen III GM Small Block Engine, LS1 Motor for Cars, Trucks
The first generation small block was revised to create the second generation LT1/LT4 that was used for some applications from ’92 to ’97, but the results didn’t satisfy the people at GM Powertrain, so they started all over in ’91 and designed a brand new small block. It’s officially called the “Gen III” motor, but
Coretalk: AERA EXPO 2005 Set For Las Vegas Hilton In April
The EXPO will showcase leading edge technology with live, operating demonstrations of equipment, tools, supplies, parts and services. Exhibits will be open on Thursday, April 28, from 10:30 am-6 pm; Friday, April 29, from 10:30 am- 6:30 pm; and Saturday, April 30, from 10:30 am- 2:30 pm. EXPO will include a keynote address from NASCAR
Surfacing Equipment Options
On older cast iron engines with conventional soft-faced head gaskets, as long as the surface finish on the cylinder head and block deck is roughly 60 to 100 microinches Ra (roughness average), the head gasket should cold seal and remain leak-free for the life of the engine. But on late model bimetal (aluminum head/cast iron
Piston Ring Technology: Stock and Performance
Piston rings have one of the toughest jobs inside an engine. They’re slammed up and down between the ring lands thousands of times a minute; they’re subjected to searing temperatures and extreme pressures; and they’re constantly scraping back and forth against the cylinder walls. In spite of all of this, the rings are expected to
Engine Kit Opportunities
In nearly all aspects of today’s competitive consumer market, the customer is king, brand means everything, and warranties on parts and services are a given, right? Great news for the value-minded shopper, but what about the supplier? In the automotive industry, of course, OEMs have been offering unprecedented warranties and financing terms for the past
Not So Stock: NASCAR Motors and Their Street Counterparts
The engines in NASCAR’s newly introduced Strictly Stock class of stock car racing in 1949 were literally stock, right off the dealer’s showroom floor. Today, they’re anything but. So what happened? Evolution. Like any sport or industry, evolution has moved NASCAR racing to where it is today, a multi-million dollar business. The engines, called ‘motors’
Rebuilding The Ford 3.0L V6
The 3.0L Ford pushrod motor has been around for nearly 20 years. It was originally introduced back in 1986 and millions of them have been installed in a wide variety of front and rear wheel drive cars and trucks since then. It’s been used in several FWD applications including the Taurus/Sable, the Tempo/Topaz and the
What head gasket issues does a Toyota 2.2L have that I should be concerned with?
The AERA Technical Committee says that loss of engine coolant has been reported on 1997 Toyota 2.2L 5SFE engines in various amounts. In most cases, there are limited signs of this leakage on the ground directly below the engine compartment after it has set for a long period of time. Depending on the production date
Topline Automotive Buys, Reopens Hylift Facility, Engine Builder, August 2004
A full-line of flat mechanical tappets, lash adjusters and encapsulated hydraulic roller lifters are again being produced by the original Hylift machines and team. The previous Hylift OE lines that were in Zeeland, MI, have now been relocated to the Muskegon plant. “The same people who made ‘The Beautiful Lifter’ are back manufacturing with precision
Get Your Shop Together To Be More Efficient, Profitable
Let’s face it; the hardest part about starting each day is being ready to work when the start bell rings. The worst way to start your day is to spend time searching for where you left off the day before. The best way to be ready is to get your shop together. This means that
Researching the Rebuilding Market for Multi-Valve Cylinder Heads
Cylinder head work has provided a good income for many of our readers over the years. All engines eventually need a valve job and guide work if they accumulate enough miles. Head work may also be needed if an engine overheats and blows a head gasket, if the head develops a crack, or an OHC
Sprint Car Motors
While the World of Outlaws, the All Stars, and USAC are the most well known of the sprint car racing organizations in this country, there are nearly fifty organizations that sanction sprint car racing. In addition, that doesn’t take into account the racetracks throughout the country that have their own division of sprint cars. Although
Head gasket selection for Toro Groundmaster and Roadmaster units with 1982-’99 Peugeot XUD9 diesel engines
Engine Builders: The AERA Technical Committee offers the following information for head gasket selection for Toro Groundmaster and Roadmaster units with 1982-’99 Peugeot XUD9 diesel engines. This information should be considered any time the head gasket is replaced. Four different head gasket thickness options are currently available and provide a variety of gasket thickness options
Rebuilding The Chrysler 2.7L
It was rated at 200 HP and it was originally used as the base motor in the Intrepid and Concorde, but it’s been the optional engine in the Stratus and Sebring since 2001 and it will be the standard engine in Chrysler’s new 300 sedan that’s coming out later this year. So, while there are
Surfacing Equipment For Today’s Engines
The surfacing needs of today’s engines are as complex as the engines themselves. Multi-valve aluminum cylinder heads on cast iron blocks are a tough combination to seal because of the difference in expansion rates between the two metals. If the surface finishes on the head and block are too rough, lateral shearing forces which occur