Video: Engine of the Week – 1963 327 Corvette Engine - Engine Builder Magazine

Video: Engine of the Week – 1963 327 Corvette Engine

The Norris family, owners of Precision Engine Machine Co. in Hyattsville, MD, are no strangers to numerous engine builds. However, Michael Norris faced a fun, new challenge when a customer came to him looking for a numbers-matching 327 Corvette engine for a 1963 Split-Window Coupe.

The Norris family, owners of Precision Engine Machine Co. in Hyattsville, MD, are no strangers to numerous engine builds. However, Michael Norris faced a fun, new challenge when a customer came to him looking for a numbers-matching 327 Corvette engine for a 1963 Split-Window Coupe.

Engine of the Week is sponsored by Penn Grade Motor Oil & Cometic Gasket.

You May Also Like

Mild vs. Wild (Diesel Edition) Ep 5 – 6.7L Powerstroke Builds

Mild vs. Wild is back, and we took a trip down to Tennessee to visit with Cass Choate and the folks at Choate Engineering Performance, to discuss building 6.7L Powerstroke engines with a mild budget of $15K and a wild budget of $30K. Mild vs. Wild is brought to you by AMSOIL INC.

Mild vs. Wild is back, and we took a trip down to Tennessee to visit with Cass Choate and the folks at Choate Engineering Performance, to discuss building 6.7L Powerstroke engines with a mild budget of $15K and a wild budget of $30K. Mild vs. Wild is brought to you by AMSOIL INC.

Kyle Morris’ Twin-Turbo Small Block Ford Engine

As Steve Morris’ son, Kyle Morris is no stranger to engine work and drag racing from his seat at Steve Morris Engines. This 1996 Mustang was purchased by Kyle at the age of 15, and he now has it ready to rip 7- and 8-second 1/4-mile passes thanks to an 1,800-horsepower, twin-turbo small block Ford

Why You Should Magnaflux Your Engine Parts

The guys at MTI Racing were looking to put together a Nissan GT-R engine, but first they Magnafluxed the crank and rods, and it’s a good thing they did. To ensure parts can get reused and don’t have signs of stress and cracks, magnafluxing can save you from more expensive repairs down the road. Related

Tina Pierce’s Twin-Turbo 509 cid Big Block Chevy Engine

Striving to make 200-mph passes during Sick Week, we came away impressed by Tina Pierce and her Chevy II Nova, which features a twin-turbo 509 cubic inch big block Chevy engine. The race veteran was attending her first Sick Week and we got the details of her drag-and-drive setup in this episode of Engine of

What’s the Deal with Biodiesel and Biofuel?

In this episode of AMSOIL Garage, we dive deeper into the topic of biodiesel and biofuel, and how it can impact your diesel engine. Related Articles – 1967 Nova with a 421 Small Block Chevy Engine – Machining a Cylinder Head for Valve Seats – Part 1 – CP4 Troubles? Try Fuel Additives

Other Posts

Turbocharged and Nitrous-Boosted 429 cid LSX Engine

It’s tough to beat the lines and looks of a Chevy Nova. Jason Sack’s 1969 Nova is certainly up there in terms of coolest-looking, and it doesn’t hurt that it has 2,200+ horsepower under the hood courtesy of a turbocharged and nitrous-boosted 429 cid LSX engine! See for yourself!

Twin-Turbo 427 cid LS Engine

Somewhere in the range of 1,500-1,700 horsepower, this LS-powered ’68 Chevelle made a new personal best pass for owner Tanner Stover at Sick Week this year. Check it out!

Twin-Turbo 347 cid Small Block Ford Engine

Kyle Morris of Steve Morris Engines built up this 1996 Mustang with a twin-turbo 347 cubic inch small block Ford engine primarily by himself. It’s been about a decade in the making, but now Kyle has a 7-second capable car primed for drag-and-drive competition. See what went into the 1,800-hp engine!

Twin-Turbo 509 cid Big Block Chevy Engine

Just one of only a few women competing at Sick Week this year, Tina Pierce of Tina Pierce Racing had her 1966 Chevy II Nova dialed in. Thanks to a twin-turbo 509 cid big block Chevy engine, the car ran some personal bests and nearly cracked the 200 mph mark. Check it out!