Engine of the Week is presented by
We caught up with Aydan Bailey at Sick Week, a drag-and-drive event Aydan’s dad Tom Bailey is the founder and promoter of. Aydan was there to compete with his 1957 Chevy wagon and a twin-turbo 6.0L LS. Hear what’s under the hood in this Engine of the Week.
Pro Motor Engines in Mooresville, NC and owner Dennis Borem have a rich history in NASCAR and other forms of racing. We got to visit the shop earlier this summer, and the team was wrapping up a dyno session on a newly assembled LS3 engine for TA2 racing. We got the full details of the
Pro Motor Engines in Mooresville, NC and owner Dennis Borem have a rich history in NASCAR and other forms of racing. We got to visit the shop earlier this summer, and the team was wrapping up a dyno session on a newly assembled LS3 engine for TA2 racing. We got the full details of the build in this Engine of the Week!
During our week in Mooresville, NC, we couldn’t leave town before visiting Pete Harrell and his shop, Harrell Engine & Dyno. We stopped by to see what engines Pete was building, what cars he was tuning and what other cool things he was working on. He was kind enough to give us the full tour.
Cylinder heads can pretty dirty over time. They get filled with carbon and other deposits that can eventually rob your engine of airflow, fuel and power. For that reason, cleaning cylinder heads is an important thing to do on a performance engine, especially if you have a direct injection head. Danny talks about techniques for
When an engine builder is spec’ing a build for himself, it typically gets all the bells and whistles. Just check out this 598 cubic inch big block Chevy build done by Gibbons Motorsports for co-owner Jake Gibbons. We spoke with Pete Gibbons, Jake’s older brother and co-owner of the shop, about the details of this
With the SML engine fully assembled, Jason Sack visits Steve Morris Engines to help with the dyno testing and tuning, as well as fitting the new SML into the Cowboy Up Nova. Related Articles – Prestige Motorsports’ Head Hunter Cylinder Head Development – Shelby Mustang 427 cid Ford Engine – Rottler Report with Matt Hussey
Logan Yelton’s ’93 Dodge has gone through quite the transformation. It was once used to transport him and his wife to prom back in the day to now burning rubber on the drag strip with 1,800 horsepower on command. This 5.9L 12-valve Cummins-powered monster has done it all. See what went into the build!
When it comes to building a 4.840″ bore space engine for drag racing, the class is limited on deck height and limited on bore space, but anything else pretty much goes. Pat Musi of Pat Musi Racing Engines recently finished development on his state-of-the-art 4.840 engine platform, and this 731 cid nitrous combo is freaking awesome!
Precision CNC-machined from premium 4340 steel billets, the design incorporates heavy-duty rod cheeks and the LS1/LS6 short snout.
When it comes to power, the engine propelling Scheid Diesel’s drag car doesn’t dissapoint. It makes 2,800 horsepower on fuel alone… no wonder it’s a record setter!
