Cylinder heads can pretty dirty over time. They get filled with carbon and other deposits that can eventually rob your engine of airflow, fuel and power. For that reason, cleaning cylinder heads is an important thing to do on a performance engine, especially if you have a direct injection head. Danny talks about techniques for cleaning a cylinder head in this episode of Soliz Says.
Machine work and sleeving has been completed on Jason Sack’s SML engine. Now Steve and his crew at Steve Morris Engines gets the engine assembled.
Machine work and sleeving has been completed on Jason Sack's SML engine. Now Steve and his crew at Steve Morris Engines gets the engine assembled.
Jason Sack’s Cowboy Up Nova was already a formidable drag-and-drive streetcar capable of 200 mph 7-second quarter mile ETs and 2,200 horsepower. However, the quest for more power and performance is never done, and that’s where Steve Morris Engines comes in and the new SML engine platform. Watch as Steve readies an SML for Jason’s
Danny Soliz of Hill Country Performance & Machine has a lot of tricks up his sleeve to make engine work a little easier. He’s great at working smarter not harder, and in this latest video he shows you a great way to remove valve springs and keep some of those valvetrain components organized. Related Articles
We were recently in Danville, IN to visit 4 Piston Racing, a premier performance Honda engine shop, and co-owner Luke Wilson. During our visit, we got to see a ton of cool things in various stages of completion, but one of the standout builds was this naturally aspirated USAC Midget Honda engine that had just
Robert Tanquary is the owner of RNR Custom Engines, an engine machine shop located in Phoenix, AZ. The shop is family owned and operated, and mainly focuses on vintage car and truck engines – from flatheads, Jeeps, AMCs, Buicks, and Pontiacs to small block Chevys and diesel engines. They own a number of Rottler machines
Factory cylinder heads for Gen III Hemi engines are pretty darn good. Edelbrock’s Performer RPM Gen III Hemi Cylinder Heads are even better. The fully assembled heads feature fully CNC-machined combustion chambers, CNC-profiled bowls, and CNC-profiled port entries/exits for improved airflow—up to 337 CFM on the intake side at .700-inch of valve lift. Edelbrock says
Kits include fully assembled PCE cylinder heads, intake manifold, valve covers, intake manifold gaskets, roller rockers, guide plates and screw-in studs.
Speedmaster Assembled Cylinder Heads come ready to run with stainless steel valves; valve springs; and valve seals, locks, and retainers. They are sold in pairs.
During a recent trip to Memphis, TN, we stopped in at BB&T Racing in South Haven, MS to meet with shop owner Derrick Bailey and check out the engine machine shop that opened in 1994. Derrick showed us around and walked us through the details of a ProCharged 540 cid big block Chevy engine he
