Super Comp Drag Racing - Engine Builder Magazine

Super Comp Drag Racing

There are no rules for engine size, but engine builders should look to build for consistency in this class

What does it take to build a winning engine for Super Comp drag racing? The Super Comp drag racing class runs on a 8.90 time limit, with essentially no rules regarding engine displacement, carburetion or type of vehicle. Engines can burn either gasoline or alcohol but no nitro or nitrous. Engines can be naturally aspirated or boosted with a blower. Most racers are running a single four-barrel Dominator-style carburetor, although a few are using injectors on their engines.

To be competitive in the Super Comp class, you don’t need the fastest car in the field. In fact, that’s why most of the people who race in this class like Super Comp. The cars that race in this class typically hit 165 to 175 mph in the traps, but speeds can range anywhere from 150 to 190 mph. It’s not the speed that matters most  – it’s the elapsed time. In Super Comp, you just have to beat the other guy to the finish line without breaking out of the 8.90 limit. If you run a lower ET, and both racers break out, then whoever is closest to the 8.90 time is the winner.

Super Comp is a more affordable alternative to some of the other drag racing classes where it can take lots of power and lots of bucks to be a winner. In Super Comp, you can be competitive with a 600 to 800 hp engine in a rear engine dragster. Some racers are running upwards of 1,200 hp, but they don’t really need that much power. In fact, some racers say if a car makes too much power and is too fast, it makes it harder for the driver to judge his distance to the finish line and the car in the other lane. Ideally, you just want to nose out the other car at the finish line while staying within the 8.90 time limit.

[inpost_gallery post_id=3448 group=”1″]

The majority of vehicles racing in Super Comp are rear engine rail dragsters because they are lightweight, relatively simple and affordable. Most of the dragsters are powered by big block Chevys, ranging from 509 to 632 cid, although some racers are running Chrysler engines or even small block Chevy V8s. A popular setup is a 565 cid big block Chevy built to redline at 7,500 rpm while making 900 to 1,000 horsepower.

Charles Linne, president of the Pacific Northwest Super Comp Association says his group races at four different strips and usually averages 15 to 20 competitors per event. “You probably need at least 800 horsepower to be competitive in our series but you don’t need any special tricks to be a winner. It depends more on driver skill than the engine or chassis.”

Linne races a Super Comp dragster himself and has his car dialed in to run consistent 8.90 ETs. “Once you’ve established a baseline, you can fine-tune your car to run 8.88 to 8.92 consistently.”

Linne says that racing in Super Comp doesn’t require much engine maintenance compared to racers in some of the higher classes such as Comp Eliminator who are constantly tearing their engines down and replacing parts. “I’ll run my engine two seasons before I’ll refresh it,” he says.

Linne believes one thing every Super Comp racer needs is an accurate weather station to monitor temperature, humidity and barometric pressure. These are the variables that affect engine tuning so you have to know what kind of jetting and timing changes to make as the weather changes.

Rich Kwasiborski of the Midwest Super Comp Series says a typical Super Comp event at a local track in Illinois will usually attract 26 to 27 competitors. At an NHRA divisional event, there may be 80 or more cars, and at an NHRA national Super Comp event, the field is usually limited to 140 cars.

You May Also Like

The Road to AAPEX Season 2, Ep 2

This year’s Road to AAPEX is a tale of two roads: One metaphorical, paved with questions that face the automotive aftermarket like the impact of EV adoption and sustainability efforts; and one quite literal, that was paved at the start of the 20th century and conceptualized the first transcontinental highway. The Lincoln Highway, which begins

This year’s Road to AAPEX is a tale of two roads: One metaphorical, paved with questions that face the automotive aftermarket like the impact of EV adoption and sustainability efforts; and one quite literal, that was paved at the start of the 20th century and conceptualized the first transcontinental highway. The Lincoln Highway, which begins in Times Square, New York City, and stretches to the Golden Gate Bridge in San Francisco, California, was the first designed with automobiles in mind.

The Road to AAPEX Season 2, Ep 1

Last year, the idea was simple: Find a junker, fix it up with the best from the automotive aftermarket, and drive it to Las Vegas for AAPEX 2022. This year, it’s anything but simple. Related Articles – What’s a Ford Sidevalve Engine? – The Drag & Drive Revolution – The Evolution of Pro Mod Diesels

What’s a Ford Sidevalve Engine?

It looks like an ordinary inline 4-cylinder flathead engine. Essentially it is, but it has quite a cult following here in the UK.

The Drag & Drive Revolution

Following that first drag-and-drive event back in 2005, spinoffs of Drag Week have been happening all over the country, and the world, both large and small. In recent years, the trend has been completely blowing up!

The Evolution of Pro Mod Diesels

The advancements within the performance diesel world over the past 20 years have been nothing short of phenomenal. In fact, within just the last five to 10 years, that progress has been even more rapid and impressive, but few progressions have been more astonishing than those within the Pro Mod Diesel realm.

Other Posts

Dave Schroeder’s 872 cid Pro Mod Nitrous Engine

Dave Schroeder and John Ens have been at the drag-and-drive game for a long time. They’ve seen a thing or two and certainly experience3d a thing or two when it comes to this category of racing, and the 872 cid Pro Mod Nitrous engine built by Reher-Morrison is a build that stands out from the

NHRA US Nationals to Celebrate 70 Years

The anniversary event will include a host of special events and celebrations to be announced in the coming weeks.

540 cid Supercharged Big Block Chevy Engine

Born without arms, Matt Stutzman, aka the Armless Archer, has excelled at competitive archery. Now, he’s turning his focus to another passion – drag racing. Looking to go 200 mph in the 1/8th mile, Matt runs a Top Sportsman drag car with a supercharged big block Chevy engine. Check it out!

Matt Stutzman’s 540 cid Supercharged Big Block Chevy Engine

We got a chance to spend significant time with Matt Stutzman during the 2023 PRI Show. He’s a Paralympic archer born without arms who’s now setting his sights on Top Sportsman drag racing. We caught up with him in the PennGrade1/DA Lubricants booth to get the details of his 540 cid big block Chevy engine,