482 cid Stack Injected Ford FE Engine

482 cid Stack Injected Ford FE Engine

When a customer came to RPM Performance & Machine asking for a badass engine build, RPM delivered this 482 cid Ford FE engine with Borla Induction stack injection and Holley EFI. Check out the full details!

Engine of the Week is presented by

We’ve featured Kyle Whetsel and Brad Simoneau of RPM Performance & Machine in our Engine of the Week series once before. We’ve also featured the shop’s outboard marine engine work and expertise in the magazine recently too. However, when we came across this 482 cubic inch Ford FE engine build the Fort Walton Beach, FL-based shop recently did, we couldn’t help but tip our cap to the shop once more.

Bear 427 FE side oiler block

Kyle and Brad were college roommates at the University of Northwestern Ohio (UNOH) when they first met. Now, more than a decade later, the two friends run RPM Performance & Machine, a shop that Kyle was an employee of for just one year before he bought the business from its original owner who retired in 2015. Brad spent 11 years working for the Engine Factory in New Jersey following his days at UNOH.

As Kyle was looking to build the business and Brad was looking for better weather, the stars aligned for Kyle and Brad to reunite on the job front. Kyle has owned RPM for six years now, and Brad started at the shop in August 2018. The shop has five full-time employees, and according to Simoneau, RPM is the only engine machine shop in town.

This Ford FE features a Scat 4.250˝ stroke rotating assembly

“We do anything and everything that hits the door,” Simoneau says. “We do anything from just rebuilding a customer’s cylinder head to big horsepower boat motors. We’re starting to branch off into the turnkey market and doing a lot with LS engines. We also do a lot of FE motors. That’s a big market for us as well. We also see the 351 and 400M Clevelands and we do some outboard marine engines, Merc cruisers, and small block and big block Chevys.”

RPM is able to tackle all those different builds and do anything that walks in the door because the shop is a full machine shop capable of doing all work in-house.

Harland Sharp rockers adorn the Trick Flow Specialties cylinder heads.

“We’ve got an RMC CNC mill we do all of our block work and head work in,” he says. “We’ve got a Sunnen CV 616. We’ve got a Winona Van Norman seat and guide machine – it’s a full machine shop and we’re capable of doing anything that comes in. We also have a Dynojet chassis dyno and an engine dyno.”

One of the shop’s more recent builds was one of those popular Ford FEs RPM is known for building. According to Brad, this is an engine that’s been a long time coming and anyone who stopped by the shop probably saw it. With the stacks it really raised eyebrows.

Milodon oil pan

The engine started with a Bear 427 cid FE side oiler block, which got enlarged to 482 cubic inches because the customer of the build specifically reached out asking for a badass engine. That’s exactly what RPM delivered.

The 482 cid Ford FE features plenty of power thanks to the Borla Induction stack injection and Holley Terminator X EFI. Kyle and Brad called up Scat Crankshafts to get one of their forged 4.250˝ stroke rotating assemblies with Mahle pistons to fit into the new Bear block.

Borla Induction stack injection and Holley EFI sit on top of the FE.

The shop worked closely with Ken out at Oregon Cams to get the right combo to work with the Trick Flow Specialties CNC-ported cylinder heads that got topped with Harland Sharp rockers.

The engine recently got put on the engine dyno for break-in and horsepower numbers and made 610 hp and 609 lb.-ft. of torque!

Engine of the Week is sponsored by PennGrade Motor OilElring – Das Original and Scat Crankshafts. If you have an engine you’d like to highlight in this series, please email Engine Builder Editor, Greg Jones at [email protected].

You May Also Like

Supercharged 572 cid SMX Engine

Danny Humphreys’ 928 Porsche has a supercharged 572 cid SMX engine in it from Steve Morris Engines, complete with a “shark fin” blower hat that really puts this car and engine combo over the top. We were able to catch up with Danny during day one of Sick Week 2024 at Orlando Speedworld.

Ever since Danny Humphreys watched Tom Cruise outrun a pimp in a 928 Porsche during the iconic chase scene in Risky Business, Danny has wanted the car for himself. In addition to wanting a 928 Porsche, Danny is also a long-time drag racer who views the sport as a progressive disease. Naturally, as soon as he did get his Porsche, he pulled the engine and the horsepower has gone up from there.

Supercharged 588 cid Hemi Engine

Ken Lazzeri, head engine builder for Indy Cylinder Head, has helped build over 5,000 Hemi engines during the life of the Mopar component manufacturer’s business. We were pumped to get time with him to discuss the details of this 588 cid supercharged Hemi engine for bracket racing. Check it out!

All-Billet Subaru EJ 2.5L Engine

This 2016 Subaru STi, which features an all-billet EJ 2.5L engine, was built to showcase what Kaiju Motorsports is capable of. Not only does it look great, but all expectation is that it performs well too. Check it out!

Kaiju Motorsports 2016 Subaru STi with a billet EJ 2.5L engine
Turbocharged Billet K24 Honda Engine

Noonan Race Engineering is well-known for its V8 engine platforms, but the shop has now dipped its toe into the 4-cylinder world with a billet K24 Honda engine. The objective – huge horsepower, while keeping factory creature comforts. Check it out!

ProCharged 5.000” Bore Space Billet Big Block Chevy Engine

One of the first 5.000″ bore space big block Chevy engines that Visner Engine Development has come out with in this new design, this billet engine was built by Nick Bacalis of Bullet Racing Engines for a 1971 C10 belonging to Michael Rieck. Check out what 4,000-plus horsepower looks like!

billet big block Chevy engine

Other Posts

Li’l Red Express Twin-Turbo 6.4L Hemi Engine

A couple years ago we were following along with the 2022 Midwest Drags event, and at the Dragway 42 stop, we got a front-row seat to see Rick Russell’s Li’l Red Express truck go down the track. Unfortunately, that pass quickly ended with the truck hitting the wall and crumpling the front end. Rick has

JBR Engines’ All-Billet Honda K24 Engine

During our time at Sick Week 2024, we took a detour from the route on our way to Bradenton to stop in and visit JBR Engines and owner Jose Bello. This shop specializes in import cylinder head and engine work, primarily the Honda platform, and they do a killer job with the records to prove

Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

Dave Schroeder’s 872 cid Pro Mod Nitrous Engine

Dave Schroeder and John Ens have been at the drag-and-drive game for a long time. They’ve seen a thing or two and certainly experience3d a thing or two when it comes to this category of racing, and the 872 cid Pro Mod Nitrous engine built by Reher-Morrison is a build that stands out from the