Chevrolet Unveils 2023 Corvette Z06 - Engine Builder Magazine

Chevrolet Unveils 2023 Corvette Z06

“The new Corvette Z06 defines the American supercar,” said General Motors President Mark Reuss. “It builds on the distinctive design and groundbreaking dynamics introduced with the mid-engine Corvette and elevates them to deliver refined but uncompromising track capability with world-class performance.”

The Z06 features an all-new 5.5L LT6, the highest horsepower, naturally-aspirated V-8 to hit the market in any production car. An all-new flat-plane crankshaft design entices offers 8,600 rpm.

“Racing was the reason the Z06 was developed in 1963, and it continues to support development of the road models that make them better on the street and the track,” said Tadge Juechter, executive chief engineer, Corvette. “It also means we’ve tested the Z06 on the best tracks around the world, from Circuit of the Americas here in the United States, to the Nürburgring in Germany.” 

Additional highlights of the 2023 Corvette Z06 include:

• Unique front and rear fascias, a first for Z06. The front fascia is designed to optimize the Z06’s cooling needs, including channeling air to a center heat exchanger, which is one of five for maximum cooling performance

• A unique, standard reconfigurable rear spoiler with adjustable wickerbill elements designed to improve high-speed stability and cornering capability on a race track

• Standard 20-inch front and 21-inch rear forged aluminum “spider” wheels (with five available finishes) — the largest wheels ever available on a production Corvette

• Available lightweight and rigid carbon fiber wheels that deliver a 41-pound reduction in unsprung mass, which is designed to contribute to more agile and responsive handling

• Specific suspension tuning, including Magnetic Ride Control 4.0, and six-piston front brakes

• Eight-speed dual-clutch transmission with a specific, 5.56 final drive ratio 

• Elevated cockpit surrounding the driver, including more carbon fiber trim and new options

• Available Z07 performance package provides 734 pounds of downforce at 186 mph, more than any Corvette ever. It includes a carbon fiber high rear wing and ground effects, specific chassis tuning, specific Magnetic Ride Control calibration, and Michelin Cup 2 R ZP tires, along with Brembo carbon-ceramic brakes and optional carbon fiber wheels

For more information on the car, visit the Chevrolet website here.

You May Also Like

Prema Racing to Join NTT IndyCar in 2025

The Prema Racing IndyCar effort will operate out of a “state-of-the-art” facility located in Indiana.

Prema Racing, the junior formula racing team based in Italy, will join the NTT IndyCar Series in 2025 with two full-time entries. The Prema Racing IndyCar effort will operate out of a "state-of-the-art" facility located in Indiana. The team's two full-time entries will be powered by Chevrolet 2.2L twin-turbocharged V6 hybrid power units.

Transtar Industries to Begin Offering OE Recycled Engines

The engines are priced and graded based on part condition and mileage. All recycled engines are backed by a 90-day warranty.

USAC Racing Appoints New President

Jason Smith will oversee the strategic direction and day-to-day operations of USAC Racing.

High Performance Expo Set for 2025 in Charlotte

The inaugural High Performance Expo (HPX) will be held from June 3-5, 2025, at the Charlotte Convention Center.

Join PERA and King for a Webinar on the Development of Performance Engine Bearings

Join Stacey Stone of King Engine Bearings for a webinar on May 15, 2024 at 10am CT all about how performance bearings are developed for racing engines of modern design. Related Articles – Santa Maria Speedway to Reopen – Trans Am Names New Technical Director for TA2 – USAC’s 2024 Hall of Fame Class Important!

Other Posts

872 cid Reher Morrison Pro Mod Nitrous Engine

A car like this 1966 Corvette featuring an 872 cid Reher Morrison Pro Mod nitrous engine is trying to kill itself every minute it’s running. But, a lot of this drag-and-drive racing is about loving the car you’re working on and feeling it’s a cool hot rod. John Ens and Dave Schroeder certainly have a cool hot rod, even if it’s a bit different! Check it out!

Cloyes to Acquire ATI

Cloyes has announced the acquisition of ATI, a leading front-end accessory drive pulley and tensioner supplier.

Holley Names Jordan Musser SVP of Safety and Electronics Products

Musser will lead a global team of professionals to develop and implement a comprehensive strategic growth plan for Holley’s leading portfolio of safety brands.

Race Winning Brands to Implement Unilateral Retail Pricing Policy

The transition to a Unilateral Retail Pricing Policy reflects Race Winning Brands’ commitment to quality and reputation of its products.