GM’s 6.5L Diesel Engine
The 6.5L GM diesel engine was introduced in 1992 to replace the 6.2L diesel engine and was in turn replaced by GM’s Duramax 6600 in 2001. On the surface it would appear that the story of the 6.5L diesel would end here, right? Well, that wouldn’t make much of an article. In actuality, production of
Rocker Arm- Form & Function
For all the changes in the performance engine over the years, one constant remains – no matter what series they’re running, no matter what the payout, no matter if it’s just a couple of guys trying to outdo each other stoplight to stoplight, racers will often spend money they don’t have in search of the
AETC Review
The 17th Annual Advanced Engine Technology Conference (AETC) was held for the second year in a row at the Orlando Convention Center, Dec. 11-13, just days before the opening of PRI. While the weather wasn’t frightful, there wasn’t quite as much Florida sunshine as the previous year either, but the talk around each morning’s breakfast
Understanding High Performance Valvetrain Technology
Parts are getting lighter, stronger and capable of producing more horsepower than ever before. One of the driving forces behind these advances has been the proliferation of aftermarket cylinder heads that require unique valvetrain components. In addition, new computer-aided design, modeling and manufacturing techniques are making it easier and faster for valvetrain component suppliers to
Performance Valves
The power that an engine produces depends to a large extent on how much air it flows. The larger the engine’s displacement in cubic inches, the more air it pumps with every stroke and the more horsepower it makes. Rpms also make power. In theory, doubling the engine’s speed doubles its power output. Rev an
High Performance Rocker Arms, Valve Springs, Retainers and Locks
On a small block Chevy, altering the rocker arm geometry without changing the rocker arm lift ratio can add 15 to 20 horsepower at the rear wheels. The stock lift ratio for a small block (SB) Chevy V8 rocker arm is 1.5:1, and for a big block (BB) Chevy V8, the ratio is 1.7:1. Bolt-on
Technotes
Engine Builders: There has been some confusion about the proper method of push rod removal and installation for 1992-2000 GM 6.5L VIN F and S diesel engines, especially during re-assembly of valve train components, according to the AERA Technical Department. Because the push rod design has different hardness requirements for each end, it is important
Engine Parts Coatings
Lubricity, heat management, corrosion protection and cosmetics. These are the main benefits that coatings can provide when applied to the surface of various engine parts. But there are different coating materials for different purposes, so the key to maximizing engine durability and performance with coated parts is using the right coating materials in the right
The Lives of Lifters, What You Need to Know
It’s like any other mechanical part in an engine. It has a simple yet specifically designed function, it’s not overly complicated and it’s definitely not the proverbial rocket science, tricked-out part. But there’s more to know about the valve lifter than you may think. First off, there are two distinct styles of lifters used in
Gen III GM Small Block Engine, LS1 Motor for Cars, Trucks
The first generation small block was revised to create the second generation LT1/LT4 that was used for some applications from ’92 to ’97, but the results didn’t satisfy the people at GM Powertrain, so they started all over in ’91 and designed a brand new small block. It’s officially called the “Gen III” motor, but
What’s Hot In Performance – Cams, Lifters & Rockers
The camshaft is really the heart of every performance engine because the cam defines the engine’s breathing potential, its torque curve and peak horsepower. The camshaft controls when the valves open, how quickly they open, how far they open (with some help from the rocker arms), how long the valves are held open, and when
Valve lifter failure is experienced on Mack MIDR 06.02.12 or MIDR 06.02.26 diesel engines valve lifter failure is experienced on Mack MIDR 06.02.12 or MIDR 06.02.26 diesel engine valve lifter failure is experienced on Mack MIDR 06.02.12 or MIDR 06.02.26 d
If a lifter failed in a 2001 Mack truck, how concerned should I be about the rest of the components? If valve lifter failure is experienced on Mack MIDR 06.02.12 or MIDR 06.02.26 diesel engines with original style lifters, the AERA Technical Committee recommends that all 12 lifters and pushrods be replaced with improved components.
Ohc Journal Repairs
One of the advantages of an overhead cam cylinder head is that it eliminates the need for certain valvetrain components. Mounting the camshaft in the cylinder head rather than the engine block eliminates the need for lifters and pushrods. On some OHC engines, the cam lobes run directly atop the valve stems. On others, cam
Ford 4.0L V6 Engine
The original 2.6L engine was replaced by the 2.8L, which was upgraded to the 2.9L and then finally bored and stroked to make it into the 4.0L that was used in the Rangers, Aerostars and Explorers starting in 1990. It was replaced by a SOHC engine from this same family at the end of model
Rebuilding the Chevrolet LT1 Engine
Compared to the 1991 Chevy 350 L98 with TPI, the LT1 made 20 percent more horsepower, got better fuel mileage, and had a much broader torque band with 90 percent of its peak torque available from just over 1,000 rpm all the way up to nearly 6,000 rpm. GM Powertrain accomplished all of this by
Rebuilding the Chevrolet LT1 Engine
Although it shared many common dimensions, looked much the same and even had a few common parts, it was totally redesigned to provide more power with lower emissions and better fuel economy. Compared to the 1991 Chevy 350 L98 with TPI, the LT1 made 20% more horsepower, got better fuel mileage, and had a
Rebuilding Hot Rod Honda Engines
Traditionally, hot rodding has been as American as apple pie, baseball, hot dogs and Chevrolet. Certainly, imported vehicles have been "hopped up," but serious hot rodding has always been dominated by enthusiasts who believe that engines have eight cylinders, pushrods and 16 valves. For the past 40 years, machine shops catering to devotees of high
Rebuilding the Buick 3300
The Buick 3300 was introduced in 1989 as areplacement for the 3.0L that had been around since 1982. It hadthe updated block with on-center bores, just like the revisedversion of the 3800 that came out the year before, along withseveral other changes and improvements. This engine was installed in many of the "A"bodied cars including
The Nitty Gritty On Small Parts Cleaning: Many Ways To Clean Small Engine Parts
Tom Nichols, CEO and president of AutomotiveMachine & Supply, Inc., Fort Worth, TX, said availabilityis most often the key to why his shop cleans and reuses smallparts. Nichols said each day his shop cleans and reuses many smallparts, including valve locks, shims, springs, retainers, rockerarm assemblies, cam bore caps, nuts, bolts, etc. "Becausewe only
Valvetrains: Better Materials & Design
Pushrods would seem to be an endangered species these days, atleast as far as most new engine designs are concerned. The onlybrand new engines built in recent years with a pushrod valvetrainhave been Chrysler’s 8.0L V10 for the Viper and Dodge Ram, andGeneral Motors new "LS1" 5.7L small block V8. All therest have either been