PAR Racing Engines’ 615 cid Big Block Chevy Engine
Spending a day in Spartanburg, SC recently, resulted in a trip to visit Scott Duggins and the team at PAR Racing Engines. This engine machine shop is well-known for cranking out quality, high-horsepower race engines. Scott toured us around and showcased a few current builds like this pair of 615 cubic inch big block Chevys!
Ford 2.3L Duratec Engine
Poteat’s Engine Rebuilding is a shop that doesn’t shy away from any kind of engine work – gas or diesel. When a customer asked to have a Ford 2.3L Duratec short block built, the answer was an easy yes. Check out this stout little four cylinder!
Ford 2.3L Duratec Short Block
One of the shops we visited during our Mooresville, NC trip was Poteat’s Engine Rebuilding in Kannapolis. We spoke to Andrew Seldomridge about the kinds of engines the shop typically works on and found it that they do a little bit of everything, including both gas and diesel engine work. They had a Ford 2.3L
Supercharged 4.900” Bore Space Hemi Engine
Building upon its 4.800″ bore space Hemi engine platform, Noonan Race Engineering made improvements to its 4.900″ bore space Hemi engine to the point that its now one of the engine shop’s bread and butter builds. Don’t let that fool you – this engine is packed with unique features and the performance to back it all up. Check it out.
Noonan Race Engineering’s Supercharged 4.900 Bore Space Hemi Engine
This summer, we got the chance to visit Spartanburg, SC and Noonan Race Engineering‘s new state-of-the-art facility. The Noonan operation is top notch through and through, and it shows in engine builds like this supercharged 4.900 bore space Hemi. Noonan’s Barry Pettit walks us through all the details in this Engine of the Week!
5.3L LS Engine
Tony Paladino’s shop, Concord Engines, has been serving the Kannapolis, NC area with engine rebuilding and machining services since 2014. One engine platform they specialize in is the LS, and it is offered in three different power levels and configurations. Check it out!.
731 cid Outlaw 4.840 Bore Space Nitrous Engine
When it comes to building a 4.840″ bore space engine for drag racing, the class is limited on deck height and limited on bore space, but anything else pretty much goes. Pat Musi of Pat Musi Racing Engines recently finished development on his state-of-the-art 4.840 engine platform, and this 731 cid nitrous combo is freaking awesome!
Pat Musi Racing Engines’ Outlaw 4.840 Bore Space Nitrous Engine
We love every opportunity we get to speak with Pat Musi of Pat Musi Racing Engines. This time, we were down in Mooresville, NC to check out his shop in person and get the details of a few engine builds he had underway. This is an Outlaw 4.84 nitrous engine with 731 cubic inches of
632 cid Big Block Chevy Nitrous Engine
With a storied race history of his own, Sandy Wilkins has taken his passion for cars and engines and turned it into his life. From race teams to Roush Yates Performance to opening Wilkins Racing Engines, he knows how to build high-horsepower engines like this 632 cubic inch big block Chevy nitrous engine for No Prep drag racing. Check it out!
Wilkins Racing Engines’ 632 cid Big Block Chevy Nitrous Engine
Sandy Wilkins of Wilkins Racing Engines recently allowed us to visit his engine and machine shop in Mooresville, NC. We were thoroughly impressed by how clean and organized his shop was and the caliber of the engines his shop churns out. We got the full details of this big block Chevy nitrous engine he built
448 cid Billet LS Engine
Pete Harrell of Harrell Engine & Dyno is real good at doin’ stuff, like building turbocharged and forced induction high-powered engines such as this 448 cid billet LS engine for Limited Drag Radial. Check out what went into this 2,500+ HP engine!
Harrell Engine & Dyno’s 2,500+ HP Turbocharged 448 cid Billet LS Engine
We all know Pete Harrell of Harrell Engine & Dyno in Mooresville, NC is real good at doin’ stuff, like building high-horsepower, forced induction engines. Earlier this summer, we stopped by HED for a tour and to talk to Pete about some of the current builds he had going on. One of the engines nearing
