Engine specialists Dandy Engines build a small block Windsor 461ci stroker for Pat Staplton. Follow the engine assembly as the guys aim to make more than 820hp naturally aspirated on regular pump unleaded. Pat plans on putting this brute of an engine into a Ford Falcon XD/XF Ute.
For our recent supercharged small block Ford build, we got hooked up with a set of 1.0mm, 1.0mm, 2.0mm gas-ported rings from Total Seal Piston Rings. Lake Speed Jr. wanted to outfit our engine with a set of tricked out, super-thin rings that would maximize efficiency. Check out the review.
For our recent supercharged small block Ford build, we got hooked up with a set of 1.0mm, 1.0mm, 2.0mm gas-ported rings from Total Seal Piston Rings. Lake Speed Jr. wanted to outfit our engine with a set of tricked out, super-thin rings that would maximize efficiency. Check out the review.
JE’s air-cooled Porsche 4032 forged pistons are designed specifically for restoration builds, road racing and street use.
This machine is made with steel fabricated heavy-duty construction and can handle aggressive deburring, descaling, fine finishing or polishing.
Designed to work with most off-the-shelf components, these heads offer an excellent street, strip, oval track, truck, or marine performance upgrade.
All ARP fasteners are manufactured in-house at California facilities to the industry’s highest standards.
As day one of Sick Week 2023 came to a close at Orlando Speed World, we passed by the pit area of Steve Groenink. We did a double take of his 1973 Toyota Celica, which features a turbocharged 388 cubic inch LS engine. The 6-second capable build is our Engine of the Week! Related Articles
The patented 3-pocket design was specifically engineered for demanding turbocharged, supercharged and nitrous applications.
Toyota’s 3UR-FE engine came to the market in 2007, and has since been a workhorse. As such, Diamond Pistons has announced a 3UR-FE piston kit.
We were recently in Bolivar, TN at Choate Engineering Performance to do some filming for a couple of our video series, so we took the opportunity to allow shop owner Cass Choate to grab our phone and give a tour of his 155,000 sq.-ft. diesel engine and machine shop. This takeover is brought to you
