Oil Eater All-In-One Professional Grade Spill Kits - Engine Builder Magazine

Oil Eater All-In-One Professional Grade Spill Kits

Oil Eater has introduced all-in-one professional grade spill kits designed to contain and clean up hazardous spills as required by OSHA and the EPA. A bonus 5-gallon bucket of Oil Eater Original cleaner is included in each kit.

Oil Eater Heavy-Duty Spill KitOil Eater has introduced all-in-one professional grade spill kits designed to contain and clean up hazardous spills as required by OSHA and the EPA.

A bonus 5-gallon bucket of Oil Eater Original cleaner is included in each kit to clean surfaces after the spill has been absorbed. It is water-based, non-toxic, non-corrosive, non-flammable, and biodegradable.

Kits are available in 65-gallon and 95-gallon overpacks that can handle the corresponding volume of liquid.

The kits also contains absorbent pads, pillows, universal snakes, booms, protective gloves, oil-resistant high temperature disposal bags and an emergency response instruction guide.

For information, visit www.oileater.com

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.