E3 Spark Plugs DiamondFIRE Racing Spark Plug Wire Sets - Engine Builder Magazine

E3 Spark Plugs DiamondFIRE Racing Spark Plug Wire Sets

E3 now offers DiamondFIRE Racing Spark Plug Wire Sets designed to specifically work in concert with DiamondFIRE Racing Spark Plugs by maximizing the power of E3’s proprietary DiamondFIRE technology.

E3 now offers DiamondFIRE Racing Spark Plug Wire Sets designed to specifically work in concert with DiamondFIRE Racing Spark Plugs by maximizing the power of E3’s proprietary DiamondFIRE technology.

The E3 DiamondFIRE Racing Wire Sets launched at the 2017 Performance Racing Industry Trade Show in Indianapolis sport a class F40 spiral conductor and are rated at just 40 ohms per foot. Impregnated with Ferrite, an iron alloy that improves magnetism, it allows for RFI suppression on a wire with low ohms of 40-50 per ft. The 8.5mm 100% silicone outer jacket encases a 100% silicone inner jacket with stainless steel locking terminals. E3 DiamondFIRE Racing Wires feature a rock-solid braided Aramid base core, Carblex outer core which make up part of the DiamondFIRE Tri-Core, and nickel copper alloy conductors for exceptional spark energy transfer – a design unique to E3.

Pre-terminated sets feature a high temperature micro-woven fiberglass, silicone-cased sleeve rated with 4,000 extra volts of protection and capable of withstanding in excess of 600º F. The heat shield sleeves on the E3 DiamondFIRE Racing Wires have the highest percentage of silicone compared to sleeved race wires currently on the market delivering unparalleled heat and abrasion resistance capability.

The spark plug boot ends are manufactured with high temperature silicone to withstand the same 600ºF temp as the wire sleeve, while the distributor end boots are EPDM, which delivers exceptional dielectric strength. Made for durability in the harshest race environments, E3 DiamondFIRE Racing Wires offer excellent protection from heat, abrasions and chemical contaminants.

Also available are universal build-your-own sets that come complete with all the necessary components to make your own wires. The distributor end comes unassembled, but includes Male/HEI and Female/HEI terminals for specific applications. These non-sleeved sets are available in either straight or 90º boot configurations. And with the M.S.R.P. starting at $72.99, E3 DiamondFIRE Racing Spark Plug wires offer one of the best values in the industry.

For more information: www.e3sparkplugs.com.

You May Also Like

Check Out What’s New at Dura-Bond Bearing

New transmission bearings, cam bearings and valve seat options.

We caught up Dura-Bond Bearing's Bill Dolak at the 2023 PRI Show to get a run down of what we can expect from the bearing company in 2024. Dura-Bond has new transmission kits, new cam bearings for the LS3 and Ford Godzilla engines, and a new copper-infiltrated powder metal valve seat, among plenty more.

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps
Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil

Other Posts

Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.