UEM ICON LS Series Pistons - Engine Builder Magazine

UEM ICON LS Series Pistons

United Engine & Machine has announced a new series of ICON LS Series Pistons. They are available now in three levels of higher performance and are offered as pistons with pin sets or piston, pin and ring kits.

United Engine & Machine has announced a new series of ICON LS Series Pistons. They are available now in three levels of higher performance and are offered as pistons with pin sets or piston, pin and ring kits. 

The FHR forged 4032 alloy features “as forged” valve pockets, with 1.5mm 1.5mm 3.0mm ring grooves.

Level 1 fully machined 4032 alloy is for street/strip and mild power adders (boost / nitrous). Piston and ring sets are supplied with new performance steel moly top and ductile iron napier second rings.

Level 2 fully machined 2618 alloy is for higher horsepower naturally aspirated and boosted applications. Features include anodized crown and top land, UltraWear M42 skirt coating and upgraded wrist pins. Piston and ring kits include performance steel moly top and ductile iron napier second rings.

UEM offers a complete array of coatings for maximum heat resistance, including Line2Line abradable skirt coating, UltraThermCM thermal barrier crown coating, and UltraWear42 anti-friction coating.

All UEM’s brands are carefully crafted with specific applications in mind. The line features a variety of superior design elements, proven engineering differences, and specialty manufacturing processes. UEM’s extensive in-house manufacturing capabilities enable the complete development and manufacture of nearly every engine’s piston needs, ensuring a precision balance, finish and concentricity.

For more info: www.UEMpistons.com

You May Also Like

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps

Properly preparing engine blocks, cylinder heads and other components for assembly should include thoroughly cleaning all threaded apertures. Debris can severely compromise accurately preloading a fastener, which is why ARP offers specially designed “chaser” taps.

These taps are not designed to cut threads; only clean them. ARP has expanded its tap offerings to include some 22 different sizes (SAE and metric), plus combination sets that feature the most popular sizes.

Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper

Other Posts

Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings