Chevy SB2 Engine - Engine Builder Magazine

Chevy SB2 Engine

When a turnkey opportunity with an established business on its last legs fell in the laps of Clayton and Christine Smith, it was too good to pass up. Today, what is now Fastime Racing Engines, builds all kinds of domestic V8 horsepower, including this Chevy SB2 engine for dirt modified. Find out what went into this build!

When Clayton Smith called his wife, Christine Smith, and told her he wanted to buy an engine shop, she immediately hung up the phone. Quickly realizing this was her husband’s dream, she called back and told Clayton if they were going to buy a shop, they would have to do it right.

“She said, ‘If we’re going to do this, here’s how it has to work. We’ve got to move completely over here and do it full on,’” Smith says of his wife’s advice.

The shop the Smith’s purchased in 2010 was National Machined Engine in Michigan. Clayton frequently bought engine parts and got cylinder head work done there as the shop was on his work commute from his home in Windsor, Ontario, Canada – just outside of Detroit – to Findlay, OH.

Clayton had been into cars, engines and racing his whole life, and has been a machinist ever since high school. When National Machined Engine’s former owner told him he’d be closing the  shop, Clayton knew right then and there he wanted to take over the operation.

“At the time, I was looking for something else to do rather than commute from Canada to Findlay, OH every week for work,” Smith says. “Running an engine shop sounded interesting to me and we cut a deal. This was an opportunity for me to combine my hobby and my work.”

One of the reasons National Machined Engine was for sale back then, according to Smith, was the original owner went from selling parts and rebuilding engines to selling women’s clothes for men. It’s now called Janet’s Closet.

“He opened up that shop right next to the engine shop and for years tried to run both,” Smith says. “Of course, business just fell off like crazy until there was nothing left.”

Clayton and Christine immediately changed the name of the shop to Fastime Racing Engines & Parts, and stayed in that location for five years.

“Because everything was set up and running, we made a deal with him to purchase the equipment and then lease half of the building for the first five years,” he says. “At the end of the five years, we decided we’d be better off at a different location, which has been one of the better things we’ve done.”

Today, the 5,000 sq.-ft., six-employee shop resides in Taylor, MI, where the focus is on domestic V8 engines such as big block and small block Chevys and LS platforms. Fastime Racing Engines also does all its machine work in-house with the exception of grinding cranks.

“We do balancing, boring, line honing, line boring, etc. We do it all in-house because I have a machinist background,” he says. “I’m a circle track racer and I race a dirt modified, so I do a lot of circle track engine work. We also do some marine engine work because the big block Chevys are so popular.”

While Clayton manages the engine work, his wife Christine helps run the rest of the business, focusing on customer service, organizing and buying parts, accounting, and more.

“She’s the glue,” Smith admits. “I don’t know how else to describe her.”

Recently, Fastime Racing Engines built a new circle track engine for Clayton’s dirt modified, and settled on building a Chevy SB2 engine.

“It’s a Chevy SB2 engine with a 4.130˝ bore and a 3.875˝ stroke,” he says. “A lot of this engine came from what I had laying around. The cylinder heads were from a customer’s old Hendrick motor who decided to go in another direction. We freshened them back up and put them back together. The engine has a Dart SHP block.”

The SHP block was originally a 4.040˝ bore that the shop machined out to 4.130˝ and finished it. The heads got new seats and guides and got resurfaced.

“Because we used parts from different eras that we had to make work together, there was some shimming involved and some extra drilling of holes and custom fasteners,” Smith says.

In addition to the machine work, the SB2 engine has a Scat crank, Callies Compstar rods, CP pistons, Total Seal rings, Crower lifters, a COMP camshaft, Clevite bearings, and a billet timing set from Engine Pro.

“We chose a specific camshaft that would make the power band broader and have more torque without giving it a peaky horsepower number,” he says. “This engine won’t turn more than 8,200-8,300 rpm most of the time. Most of those SB2s like it up around 9,000 rpm, but we make peak power around 8,600 rpm. Our idea was to make a larger cubic inch with a little bit broader camshaft so that we could tone it down and keep the throttle sensitivity consistent.”

The set up for the camshaft is .775 lift on the intake, .784 on the exhaust and the duration at 50 is 259 on the intake and 269 on the exhaust.

To cap off this circle track engine build, Fastime Racing Engines poured in some Brad Penn / PennGrade oil.

“We do a lot of flat tappet engines, so we use a lot of PennGrade or Brad Penn oil,” Smith says. “Seems like that really works well for our customers. Most of them prefer it, and it’s reasonably priced for what it does.”

With this engine all ready to go, Smith says he was happy with the results.

“These engines are very capable of making a lot more horsepower, but our goal was to make it drivable for a modified, so it came out at 746 horsepower and has a pretty broad power band,” he says.

Time to head to the track!

The Engine of the Week eNewsletter is sponsored by PennGrade Motor Oil and Elring – Das Original.

If you have an engine you would like to highlight in this series, please email Engine Builder magazine’s managing editor, Greg Jones at [email protected].

You May Also Like

Turbocharged 388 cid LS Engine

When you look at a Volvo wagon, all sorts of things come to mind, but running quarter-mile passes of any speed usually isn’t one of them. However, Mikael Borggren’s 1987 Volvo with a turbocharged 388 cid LS engine capable of 6-second passes is definitely a sight to see! Read up about all the engine details!

We first got a glance at Mikael Borggren’s LS-swapped Volvo wagon at the inaugural Sick Week in 2022, and we instantly fell in love with it. The unassuming, “soccer mom” vibes of the Volvo paired with the performance of a turbocharged LS engine made for a surprising result on the track – 6-second quarter-mile passes at 200+ mph!

118mm Turbocharged 540 cid Big Block Chevy Engine

These days, a 200+ mph pass at a drag-and-drive event like Sick Week, is commonplace. However, it’s not every race you watch a competitor’s doors literally get blown off. Stefan Gustafsson did just that while running a PR of 6.43 at 218 mph thanks to his C4 Corvette and its turbocharged 540 cid big block Chevy engine. See what’s in this 2,100+ horsepower engine!

Twin-Turbo 400 cid LS Next Engine

Achieving five consecutive days of mid-6-second passes and 1,000 miles driven on the street earned Michael Westberg the 2023 Sick Week overall win. His Chevy S10 features a 400 cubic inch twin-turbo LS Next engine. See what’s in this engine build done by ACE Racing Engines!

Turbocharged 388 cid LS-Swapped 1973 Toyota Celica

Proof that cars from the ’70s were awesome is Steve Groenink’s 1973 Toyota Celica. Saved from a farmer’s field, this Celica features a turbocharged 388 cid LS engine capable of 6-second passes. Check it out!

Twin-Turbo 429 cid Ford Boss Engine

Earl Schexnayder of Schexnayder Racing is a Ford guy through and through. As such, he has been entering drag-and-drive events with his 2000 Cobra Mustang and a twin-turbo 429 Ford Boss engine since 2011. Check out what makes this Ford combo a sweet one!

Other Posts

Jason Sack’s Turbocharged 429 cid LSX Engine

Jason Sack had arguably one of the nicest Novas we saw during Sick Week 2023. The car’s beauty had some sort of gravitational pull as we walked passed it in the pits. Naturally, we gave in and stopped to have a chat with Jason Sack about his 1969 Nova and its turbocharged 429 cid LSX

1968 Chevelle with a Twin-Turbo 427 cid LS Engine

This 1968 Chevelle, owned by Tanner Stover, was thought out from the beginning to handle drag-and-drive competitions, and no detail was left undone. The gorgeous car features a twin-turbo 427 cubic inch LS engine capable of running 7-second passes! It’s our Engine of the Week! Related Articles – Why You Should Machine Your Connecting Rods

Kyle Morris’ Twin-Turbo Small Block Ford Engine

As Steve Morris’ son, Kyle Morris is no stranger to engine work and drag racing from his seat at Steve Morris Engines. This 1996 Mustang was purchased by Kyle at the age of 15, and he now has it ready to rip 7- and 8-second 1/4-mile passes thanks to an 1,800-horsepower, twin-turbo small block Ford

Tina Pierce’s Twin-Turbo 509 cid Big Block Chevy Engine

Striving to make 200-mph passes during Sick Week, we came away impressed by Tina Pierce and her Chevy II Nova, which features a twin-turbo 509 cubic inch big block Chevy engine. The race veteran was attending her first Sick Week and we got the details of her drag-and-drive setup in this episode of Engine of