Custom Welding Truck with Two Compound-Turbo Cummins Engines - Engine Builder Magazine

Custom Welding Truck with Two Compound-Turbo Cummins Engines

Diesel of the Week is presented by

Motivated by the steel industry and those coming back from WWII who got into welding, Steve Darnell built this custom welding truck complete with a 12-valve 5.9L Cummins as well as a 4-cylinder Cummins engine – both compound turbocharged. We got the details of the build during the 2022 Ultimate Callout Challenge.

You May Also Like

Harrell Engine & Dyno Shop Tour

During our week in Mooresville, NC, we couldn’t leave town before visiting Pete Harrell and his shop, Harrell Engine & Dyno. We stopped by to see what engines Pete was building, what cars he was tuning and what other cool things he was working on. He was kind enough to give us the full tour.

During our week in Mooresville, NC, we couldn't leave town before visiting Pete Harrell and his shop, Harrell Engine & Dyno. We stopped by to see what engines Pete was building, what cars he was tuning and what other cool things he was working on. He was kind enough to give us the full tour.

How to Clean a Direct Injection Cylinder Head

Cylinder heads can pretty dirty over time. They get filled with carbon and other deposits that can eventually rob your engine of airflow, fuel and power. For that reason, cleaning cylinder heads is an important thing to do on a performance engine, especially if you have a direct injection head. Danny talks about techniques for

Gibbons Motorsports’ 598 cid Big Block Chevy Engine

When an engine builder is spec’ing a build for himself, it typically gets all the bells and whistles. Just check out this 598 cubic inch big block Chevy build done by Gibbons Motorsports for co-owner Jake Gibbons. We spoke with Pete Gibbons, Jake’s older brother and co-owner of the shop, about the details of this

Jason Sack’s SML Engine Goes on the Dyno and Back in His Nova

With the SML engine fully assembled, Jason Sack visits Steve Morris Engines to help with the dyno testing and tuning, as well as fitting the new SML into the Cowboy Up Nova. Related Articles – Rottler Report with Robert Tanquary of RNR Custom Engines – Turbocharged and Nitrous-Powered 6.0L Powerstroke Engine – Prestige Motorsports’ Head

Assembly of a Steve Morris Engines SML for Jason Sack – Part 2

Machine work and sleeving has been completed on Jason Sack’s SML engine. Now Steve and his crew at Steve Morris Engines gets the engine assembled. Related Articles – Shelby Mustang 427 cid Ford Engine – Rottler Report with Matt Hussey of MSH Machine – Rottler Report with Bryan Neelen of Late Model Engines

Other Posts

Turbocharged 5.9L 12-Valve Cummins Engine

Logan Yelton’s ’93 Dodge has gone through quite the transformation. It was once used to transport him and his wife to prom back in the day to now burning rubber on the drag strip with 1,800 horsepower on command. This 5.9L 12-valve Cummins-powered monster has done it all. See what went into the build!

393 cid Billet Cummins Engine

When it comes to power, the engine propelling Scheid Diesel’s drag car doesn’t dissapoint. It makes 2,800 horsepower on fuel alone… no wonder it’s a record setter!

Turbocharged LML Durmax Dragster

Everybody loves a good diesel dragster! Paul Vasko’s is an LML Duramax, complete with a GT55 turbo, a heap of nitrous, and a number of other additions that make this build an absolute powerhouse.

448 cid Billet LS Engine

Pete Harrell of Harrell Engine & Dyno is real good at doin’ stuff, like building turbocharged and forced induction high-powered engines such as this 448 cid billet LS engine for Limited Drag Radial. Check out what went into this 2,500+ HP engine!