Lucas Oil Engine Break-In Oil - Engine Builder Magazine

Lucas Oil Engine Break-In Oil

How well and how fast the rings will seal could make the difference. Compatible with ethanol, methanol and high octane race gas.

The initial start up of a new engine is critical to its performance and life expectancy. How well and how fast the rings seal could make the difference between winning and losing. Lucas Oil’s break-in oil is compatible with ethanol, methanol and high octane race gas.

KEY BENEFITS
Quicker more efficient ring seal
Higher levels of zinc and phosphorus maximum protection
A must use for flat tappet camshaft break-in
Less blow-by equates more power and better ring seal
Requires no moly supplement and no additional additives
Compatible with methanol and high octane race fuel
Recommend use on initial break-in of both flat tappet and roller camshaft applications for maximum protection and performance
Excellent on track performance prior to switching engine over to the racing only line conventional or synthetic

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Morgan Lucas Named CEO, Katie Lucas Named President of Lucas Oil

Promotions highlight Lucas Oil’s focus on strategic growth, brand evolution and investment in product innovation, operational efficiencies and expanding retail channels.

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.