Cylinder head repairs like this don’t normally get done, but Steve Morris of @stevemorrisracing always seems to find a way!
Steve Morris Tackles a Tough Cylinder Head Repair
Main Navigation
Wilkins Racing Engines’ 347 cid Small Block Chevy Engine
Stopping into Wilkins Racing Engines in Mooresville, NC was one of our favorite stops during our Charlotte trip earlier in 2023. Owner Sandy Wilkins showed us around his machine shop and gave us the details of a few engine builds like this Comp Eliminator 347 cid small block Chevy. It’s our Engine of the Week!
Stopping into Wilkins Racing Engines in Mooresville, NC was one of our favorite stops during our Charlotte trip earlier in 2023. Owner Sandy Wilkins showed us around his machine shop and gave us the details of a few engine builds like this Comp Eliminator 347 cid small block Chevy. It's our Engine of the Week!
All About Those Valves
We recently sat down with Ryan Hamilton and Phil Data of SBI, as well as D&J Precision Machine owner Drew Pumphrey to talk about everything valves – problem areas, materials, sizes, angles, valve jobs, seats, and even springs. Check out this latest Intellectual Horsepower episode brought to you by SBI. Related Articles – CNC Fabrication’s
CNC Fabrication’s Turbocharged 7.3L Powerstroke Engine
During this past summer’s Ultimate Callout Challenge, we came across CNC Fabrication’s booth and got the chance to speak with owner Corey Hurtt about his business and the brand-new 7.3L Powerstroke engine they built. The engine was just finished at the time, but Corey had plans to eventually run the truck in the ODSS 5.90
Drag-and-Drive Billet Big Block Chevy Engine
Pete Harrell of Harrell Engine & Dyno in Mooresville, NC specializes in forced induction builds and “polishing turds,” as he likes to put it. He got this build extra polished, as it features a 540 cubic inch billet aluminum big block Chevy block for drag-and-drive events. Hear what else went into the build directly from
Clay Millican’s 12,000-HP Top Fuel Hemi Engine
During a visit to Pro Motor Engines in Mooresville, NC, we were fortunate to line up our time at the engine shop while one of Clay Millican’s Top Fuel Hemi engines was in for machine work and a rebuild. PME Owner Dennis Borem walked us through the details of this 12,000 HP Top Fuel engine
Other Posts
Engine Builder Magazine’s 2023 America’s Best Engine Shop Winners
Engine Builder magazine has announced the three winners of its 2023 America’s Best Engine Shops contest, sponsored by The ArmaKleen Company and Safety-Kleen. The three winners, Noonan Race Engineering (Race), Warren Diesel Injection (Diesel) and 955 Automotive (Vintage), accepted their awards during Engine Builder’s PRI Party, sponsored by The ArmaKleen Company and Safety-Kleen, at Tin
Trick Flow Specialties DHC 200 Aluminum Cylinder Heads
Trick Flow Specialties DHC 200 Aluminum Cylinder Heads combine the classic looks of 1960s-era ‘camel hump’ cylinder heads with CNC-ported airflow capabilities to give a small block Chevy a big dose of horsepower. You can see the heads for yourself at the Trick Flow Specialties booth #23011 in the Race and Performance Section, Central Hall.
Ford 2.3L Duratec Short Block
One of the shops we visited during our Mooresville, NC trip was Poteat’s Engine Rebuilding in Kannapolis. We spoke to Andrew Seldomridge about the kinds of engines the shop typically works on and found it that they do a little bit of everything, including both gas and diesel engine work. They had a Ford 2.3L
Billy Godbold and Chris Potter Blow Our Minds Talking Camshafts!
In this episode of Intellectual Horsepower, Engine Builder Editor Greg Jones sits down with Billy Godbold and Chris Potter of Godbold Engineering Solutions and COMP Cams/Edelbrock Group, respectively, to talk all about camshafts and what engine builders and racers need to know. Did you know the camshaft should be selected after you know the rest
