Deep Dive on Lifters with Hylift Johnson - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Video

Deep Dive on Lifters with Hylift Johnson

What engine builders, assemblers and DIYers need to watch out for.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

We took an opportunity at the 2023 PRI Show to sit down with lifter experts at the Topline / Hylift Johnson Lifters booth. Speaking with Topline’s Dave Popp, Tyler Crockett Marine Engines’ owner Tyler Crockett, and Wood Performance owner Bobby Wood, we discuss the good and the bad when it comes to lifters today, and what engine builders, assemblers and DIYers need to watch out for. Check out this latest Intellectual Horsepower episode brought to you by Topline Automotive / Hylift Johnson Lifters.

Related Articles

You May Also Like

Video

Scheid Diesel-Built Triple-Turbo Billet 6.4L Cummins Super Stock Engine

During our visit to Scheid Diesel we had our mouths wide open in amazement for most of the time, but this Super Stock pulling engine really made our jaws drop! Scheid’s Joe Gasper walked us through the details of this billet triple-turbo 6.4L Cummins build, and it’s our latest Diesel of the Week brought to

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

During our visit to Scheid Diesel we had our mouths wide open in amazement for most of the time, but this Super Stock pulling engine really made our jaws drop! Scheid's Joe Gasper walked us through the details of this billet triple-turbo 6.4L Cummins build, and it's our latest Diesel of the Week brought to you by AMSOIL INC.

Read Full Article

More Video Posts
Sunnen’s Newest Honing Equipment Highlights

As Sunnen Products Co. celebrates 100 years in the industry in 2024, Tom Dustman, sales director for Sunnen, and other Sunnen team members were at the 2023 PRI Show to showcase the latest Sunnen equipment, including the SV-35 and SV-15 honing machines to engine builders and machinists. Related Articles – Steve Morris Engines’ Twin-Supercharged 454

By Engine Builder
Steve Morris Engines’ Twin-Supercharged 454 Big Block Chevy Engine

It had been 26 years since the last time Val Morris, Steve Morris’ wife, was behind the wheel of a drag car. The shop had been working on this project car named Sugar Momma, and got it done in time for Sick Week 2024. When it came time to figure out who’d drive it, Steve

By Greg Jones
Scheid Diesel is a Diesel Mecca

We recently made the drive to Terre Haute, IN to visit Scheid Diesel and owner Dan Scheid. This diesel engine and machine shop is one of three locations Scheid operates, and has the capability to everything in-house from fuel lines and injector work to machining and general repair and much more. Check out why Scheid

By Greg Jones
Stuffing a Supercharged 572 cid SMX Engine in a Porsche 928

For Danny Humphreys, drag racing is a progressive disease. Ever since he watched Tom Cruise outrun a pimp in a 928 Porsche, he’s wanted the car for himself. As soon as he got one, he pulled the engine and the horsepower has gone up from there. Today, Danny has a supercharged 572 cid SMX engine

By Greg Jones

Other Posts

Shop Solutions March 2024

I always keep a pair of needle nose pliers and a small, straight screwdriver in my blast cabinet to hold small parts when blasting.

By Shop Solutions – The Power of Knowledge
Summit Racing Big Block Chevy Hydraulic Roller Camshafts

Made in the USA from billet bearing steel and finished on Landis grinders, the cams have a 4/7 firing order.

By Greg Jones
Isky Hydraulic Flat Tappet Cam and Lifter Kits

For more power and rpm in street cars, and the necessary power and torque for the track.

By Greg Jones
Isky cams and lifters
Gettin’ Schooled Visiting SAM Tech

We couldn’t spend a few days in the Houston, TX area without taking some time to check out the School of Automotive Machinists & Technology, aka SAM Tech. This accredited trade school founded and operated by the Massingill family, has been getting people educated in engine building and machining for nearly 40 years, and over

By Greg Jones
SAM Tech