Edelbrock E-Force Supercharger for 2015-'16 Mustang GT - Engine Builder Magazine

Edelbrock E-Force Supercharger for 2015-’16 Mustang GT

Edelbrock has expanded its Ford Mustang E-Force Supercharger systems to now include the 2015-'16 Ford Mustang GT. These new systems can increase the power of the 5.0L Coyote up to 732 horsepower and 690 ft-lbs. of torque at the flywheel, for a 297 horsepower and 290 ft-lbs. of torque increase over stock.

1586-tn

Edelbrock has expanded its Ford Mustang E-Force Supercharger systems to now include the 2015-’16 Ford Mustang GT. These new systems can increase the power of the 5.0L Coyote up to 732 horsepower and 690 ft-lbs. of torque at the flywheel, for a 297 horsepower and 290 ft-lbs. of torque increase over stock. The Stage 1 and Stage 2 Street systems are designed to work with all OEM emissions equipment, which will make them 50 state emissions legal (E.O. Number pending). These systems provide the best combination for your daily driver.

These E-Force systems are the first to feature the new DP-3C intercooler. DP-3C references the “Dual-Pass Three Core” design. With this new design, the intake air charge passes through the intercooler twice; first pass is from the rotors up through the center core and the second pass is when the air charge goes down into the runners. The DP-3C intercooler also features 45% more surface area over the previous Mustang designs, allowing this system to achieve lower intake air temps for increased power output.

Edelbrock E-Force Supercharger Systems incorporate the Eaton Gen VI 2300 Twin Vortices Series (TVS) rotor assembly, as well as an air to water intercooler system and dual pass heat exchanger. Performance has been optimized through a unique runner design and an integrated bypass valve that helps reduce parasitic loss under light throttle, which improves gas mileage potential. All of this technology fits under the stock hood without any modification.

The Stage 1 system includes everything you need to bolt it on under the hood, including supercharger/manifold assembly, air-to-water intercooler system and a handheld programmer to properly tune the factory ECU for the added power. The Stage 2 system includes all of the same components, plus a larger bore throttle body, cold air intake system, higher output fuel pump and 60 lb. injectors to support the added performance. Stage 2 components also available as an upgrade kit for those who already own a Stage 1 kit.

Both the Stage 1 and Stage 2 E-Force systems are backed by a FREE 3-year/36,000 mile Limited Powertrain Warranty, offering up to $16,500 of coverage for worry-free operation. Outside of the power and warranty, these systems have great looks under the hood with a black powder coated supercharger assembly that will let people know… your Mustang is Edelbrock Supercharged.

You May Also Like

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

Other Posts

Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

Compound Turbocharged 6.7L Powerstroke Engine

With a background in farming, Tanner Allison grew up with a passion for diesel trucks and engines. He also gravitated towards the Powerstroke platform, and has since set his sights on showing what a 6.7L Powerstroke engine can do. Check out Tanner’s most-recent diesel build!

PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.