iNTECH Intakes for C5 Corvette - Engine Builder Magazine

iNTECH Intakes for C5 Corvette

Holley has announced the release of two new products from iNTECH Cold Air Intakes – expanded coverage of C5 Generation Corvettes with new designs, intake covers and cleaning product.

iNTECH’s line of cold-air intakes has expanded to include coverage for all year ranges of C5 Generation Chevy Corvettes. With two new offerings, the 1997-2000 and 2001-2004 models can benefit from increased performance and unrivaled good looks (especially when paired with the optional Carbon Fiber cover).

Styled to match the rest of the engine compartment and developed exclusively for 5.7L LS1-powered C5s, they boost horsepower by as much as 22.4 and torque by as much as 19.6 foot-pounds across a wide power band. A unique dual-filter “hammerhead” style intake tube delivers maximum air flow and velocity, and two huge, washable, reusable high-flow four-layer dry-air filters eliminate the need for filter oils that can damage MAF sensors and set off “check engine” lights. The air-filter media is constructed with an inner and outer aluminum mesh that prevents filter deformation and rust, a silicone bellows-style coupler at the throttle-body connection makes it easy to use nitrous plates or throttle-body spacers without cutting the tube, and factory mounting locations and emissions controls ensure a hassle-free installation. 
1997-2000 Chevy Corvette iNTECH Cold Air Intake
Holley’s new intake system produced a gain of 22.4 horsepower and 19.6 lb./ft. of torque with excellent performance across the board. The large, high flow air filters are washable, reusable and constructed of 4-layers of dry filter material, which do not require usage of filter oils. Filters are easily cleaned using iNTECH’s synthetic formula that removes dirt and grime to restore your filters back to maximum performance and like new condition. For full product details, click here.
2001-2004 Chevy Corvette iNTECH Cold Air Intake
Holley’s new intake system produced a gain of 15.3 horsepower and 16.1 lb./ft. of torque with excellent performance across the board. Customers can also pair these intakes with an optional carbon fiber cover, to add race inspired styling to the engine compartment of their Corvette. For full product details, click here.

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.