Champion Oil recently released its "Purpose-Built" full synthetic 15W-50 Racing Oil in a new 5-gallon container. - Engine Builder Magazine

Champion Oil recently released its “Purpose-Built” full synthetic 15W-50 Racing Oil in a new 5-gallon container.

Champion’s 15W-50 Racing Oil seals out rust, neutralizes acids and resists foaming.

Company: Chapmion Racing Oil
http://www.championsusechampion.com

Champion’s 15W-50 Racing Oil utilizes a premium ZDDP anti-wear protection package, which contains a unique balance of chemistry including high levels of zinc and phosphorus. This specialized, full synthetic racing oil also is designed to increase horsepower and 118974championo_00000068860torque, resist the thinning effects of fuel dilution, and is highly resistant to evaporative losses, thus reducing oil consumption, the company says. These low rates of oil consumption allow oil to flow freely without significant “boil-off” thickening to ensure dependable viscosity, engine lubrication and protection.

Champion’s 15W-50 Racing Oil seals out rust, neutralizes acids and resists foaming, the company adds. Rust inhibition is especially important for engines subject to frequent short-run operations or extended periods of storage. Acid neutralization protects engines from damage caused by corrosive by-products of combustion. Foam resistance ensures protection against the metal-to-metal contact and wear that occurs when air is trapped in oil. Plus, Champion’s proprietary TVS Polymer Technology adheres to metal parts for maximum film strength under the harshest of racing conditions.

In addition, Champion’s 15W-50 Racing Oil is formulated specifically for friction reduction, to significantly reduce operating temperatures and to prevent the forming of sludge, varnish, deposits or acids.

Champion’s 15W-50 Racing Oil part no. 4309 is available in 12-quart/case lots, 5-gallon containers, 55-gallon drums and 275-gallon totes.

http://www.championsusechampion.com

You May Also Like

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

Other Posts

PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

Engine Ice’s Ice Water Racing Coolant

Engine Ice’s Ice Water provides a significant reduction in surface tension, moving heat away from the engine fast.