6.7L Turbocharged Cummins Engine - Engine Builder Magazine

6.7L Turbocharged Cummins Engine

Jessie Harris' Cummins-powered Chevy C10 won the Fastest Diesel honor at Sick Week 2023. We were there to get the inside scoop on the 6.7L under the hood. Check it out!

Diesel of the Week is presented by

Jessie Harris’ 1975 Chevy C10 has been passed down for generations. His grandfather purchased it new in ’75, before selling it to Jessie’s father in ’78, and then Jessie got his hands on it in the ’90s once he got his license.

Almost 50 years later and that same C10 has gone through quite a few changes. In fact, the two-wheel-drive Chevy just recently earned Fastest Diesel honors at Sick Week 2023. The machine was one of only a few diesels at the event and proved to be a stunner on the drag strip. It’s been known to leave the line with 50-psi of boost on tap and pull the front wheels off the ground in route to 1.1-second 60-foot times.

Before Sick Week, Harris’ truck could be spotted at Rocky Mountain Race Week and Hot Rod Drag Week on various occasions. He’s been racing the Cummins-powered truck since 2015, but before that, the truck was running gas, e85 or alcohol. Its diesel life began with a 5.9L P-pumped 24v Cummins that Harris had removed from his tow truck and dropped into the Chevy. Today, it boasts a turbocharged 6.7L Cummins that turns heads wherever it goes.

The engine is built around a stock block and has a stock crankshaft, Carillo rods, and Arias pistons. The head was done by Wagler Competition Products and has a Banks intake on it, and the camshaft is a Hamilton 188/220. It also has stock rocker arms.

“For the turbo setup we went with a single turbocharger, an S484/96 with a DPS Turbonator VGT housing,” Harris says. “The fuel system is S&S Diesel Motorsports, it’s their 400% over injectors and 14mm race pump. The rest of the fuel system is Aeromotive.

“I got the intercooler from Real Street Performance in Florida. I wanted a big core, and most people didn’t want to talk about it, but they could do it. The front cover is a Wagler unit and it’s capable of driving four pumps, although I’m driving one fuel pump and one dry-sump oil pump. Not many people do dry sump on diesels, but my oil pan clearance forced me to, and I don’t regret it.”

As Harris continues to upgrade and change his engine setup, the tune from his EFI Live also gets adjusted. For a long time, he was making just around 900 horsepower, but Harris believes that number was turned up to around 1,200-hp during Sick Week.

The goal for Sick Week was to get under 8.70 – unfortunately that didn’t happen, but Harris attributes that to turning up the engine too quickly. The engine tune is right where is needs to be, but Harris has more work to do on the chassis to pull everything together. The ultimate goal will be do get the truck over the 1,500-horsepower barrier.

Diesel of the Week is sponsored by AMSOIL. If you have an engine you’d like to highlight in this series, please email Engine Builder Editor Greg Jones at [email protected].

You May Also Like

First-of-its-Kind Compound-Turbo L5P Duramax Engine

While incredibly rewarding, nothing about this L5P Duramax build was easy for Lead Foot Diesel Performance – everything was custom or a first. From the billet crank to the one-off compound turbos, this L5P Duramax is impressive. Check it out!

L5P Duramax engine

Some people are just built to modify stuff; it’s in their DNA. Vinny Himes knew from a very young age that he was one of those people.

“I grew up with my grandfather's entire salvage yard at my fingertips,” says the sales manager at Lead Foot Diesel Performance (LFDP), a 32,000-square-foot shop in Monroe, GA, with 22 drive-in bays and 18 employees on site. “I had a fully modified riding lawn mower that would do wheelies across the yard when I was 8 years old.”

Turbocharged 5.9L VP44 Cummins Engine

A few years ago, Jordan Blackard stumbled upon a 2nd Gen 2001 Ram 2500 that was being sold by Chase Fleece of Fleece Performance. After a few years of casual driving and fixing it up, he decided in 2022 to get working on a race build featuring a 5.9L VP44 Cummins engine. Check it out!

415 cid Billet Cummins Engine in a Pro275 Cadillac

Ring Racing owner Jared Ring revealed a metamorphosis to this 2016 Cadillac ATS-V last week. The Cadillac is now equipped with radial tires and a 415 cid Cummins engine built by Freedom Racing Engines, and the combo just competed at Lights Out 15.

Cummins-powered Cadillac ATS-V Pro275 drag car
Turbocharged 5.9L Common Rail Cummins Engine in a 1947 Ford

After sitting in his father-in-law’s backyard for a number of years, this 1947 Ford was gifted to Chase Wells’ wife. Chase owns 1 Way Diesel Performance and knew someday he’d bring the truck back to life. He did so using a 5.9L common rail Cummins engine on a special episode of Texas Metal’s Loud and Lifted. Check out the result.

1,000-HP Capable 6.7L Powerstroke Engine

Nick Stoner, a customer of Kill Devil Diesel, recently got his fully built 6.7L Powerstroke engine – a build Nick wanted to be capable of 1,000 horsepower. However, Nick is no longer building the truck the engine was going into, so this badass diesel engine is for sale. Check it out.

6.7L Powerstroke engine

Other Posts

Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

540 cid Small Block John Deere Light Pro Stock Engine

When it comes to PRI booth engines, Fluidampr has been a great booth to visit over the last couple years, and at the 2023 show the company had a VG Motorsports-built small block John Deere Light Pro Stock engine on display that definitely stopped us in our tracks. We got to speak with VG Motorsports

872 cid Reher Morrison Pro Mod Nitrous Engine

A car like this 1966 Corvette featuring an 872 cid Reher Morrison Pro Mod nitrous engine is trying to kill itself every minute it’s running. But, a lot of this drag-and-drive racing is about loving the car you’re working on and feeling it’s a cool hot rod. John Ens and Dave Schroeder certainly have a cool hot rod, even if it’s a bit different! Check it out!

Dave Schroeder’s 872 cid Pro Mod Nitrous Engine

Dave Schroeder and John Ens have been at the drag-and-drive game for a long time. They’ve seen a thing or two and certainly experience3d a thing or two when it comes to this category of racing, and the 872 cid Pro Mod Nitrous engine built by Reher-Morrison is a build that stands out from the