IRD Racing K4 Series Custom Carburetors - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

IRD Racing K4 Series Custom Carburetors

From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

Engine Builder
By Engine Builder
Published:

K4 series custom carburetors are designed with the nitrous/naturally aspirated racer in mind. From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

Related Articles

Made with a billet aluminum center section and custom calibrated for your racing application. Features include Billet construction for IRD’s 4150 and 4500 designs, custom boosters per application and more.

Features:

*Billet construction for 4150 and 4500 designs
*Custom boosters per application
*IRD Billet base plate for our 4150 designs
*Adjustable throttle linkage 4150/4500
*Cast aluminum fuel bowls with big sight windows
*Teflon bushing inserts for better throttle shaft sealing
*IRD K4 billet metering blocks (2 or 3 circuit design per application)
*Adjustable air bleeds
*High flow needle and seat custom to your specs\
*Compatible with gas applications

Rated R carburetor is recommended for E85 and alcohol combinations and saltwater boat applications due to it’s corrosion resistant coating.

You May Also Like

Products

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

Scribner Plastics' cylinder head storage/shipping container, Part #5148, is the newest addition to the company's container lineup. Small block as well as big block cylinder heads fit within this unique container. Most Pro Stock heads will also fit. The container's interior dimensions are 9” wide by 24” long with a 6" height.

Read Full Article

More Products Posts
Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.

By Greg Jones
CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

By Greg Jones
Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

By Greg Jones
Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

By Greg Jones

Other Posts

All-Billet K24 2.2L Honda Engine

We’ve known JBR Engines owner Jose Bello for a few years, and well before that, we knew his shop was one of the premier shops in the Honda and import engine scene. During a recent visit, we got to see an all-billet Honda K24 2.2L engine coming together for a customer looking to improve upon his 5.86-second quarter mile time!

By Greg Jones
Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

By Greg Jones
872 cid Reher Morrison Pro Mod Nitrous Engine

A car like this 1966 Corvette featuring an 872 cid Reher Morrison Pro Mod nitrous engine is trying to kill itself every minute it’s running. But, a lot of this drag-and-drive racing is about loving the car you’re working on and feeling it’s a cool hot rod. John Ens and Dave Schroeder certainly have a cool hot rod, even if it’s a bit different! Check it out!

By Greg Jones
Dave Schroeder’s 872 cid Pro Mod Nitrous Engine

Dave Schroeder and John Ens have been at the drag-and-drive game for a long time. They’ve seen a thing or two and certainly experience3d a thing or two when it comes to this category of racing, and the 872 cid Pro Mod Nitrous engine built by Reher-Morrison is a build that stands out from the

By Greg Jones