MSD's Atomic EFI - Engine Builder Magazine

MSD’s Atomic EFI

209MSD Performance is excited to announce that the Atomic Fuel Injection System (PN 2900 & 2910) has been granted an Executive Order Number from the California Air Resources Board. This E.O. Number makes the Atomic the only aftermarket EFI system that is legal on 1987 and older GM vehicles in California.

The Atomic EFI system received E.O. Number D-722 which permits the system to be installed in place of the factory carburetor on 1987 and older GM passenger cars and trucks originally powered by a V8 engine. This Executive Order also means the Atomic EFI system provides “reasonable basis” for satisfying the anti-tampering requirements of the Federal Clean Air Act, thus allowing its use in all other states.

This is terrific news for enthusiasts with an ’87 and older GM car or truck as it means they can finally do away with their old carburetor and take advantage of the driveability benefits of a modern, self-learning EFI system such as quick starts, consistent idle and smooth power throughout all driving conditions.

During thorough testing it was confirmed that the Atomic system did not reduce the effectiveness of the applicable vehicle pollution control systems and therefore was granted an exemption from the prohibitions of Section 27156 of the California Vehicle Code for 1987 and older General Motors passenger cars and pickups originally equipped with a V8 engine and carburetor. MSD will supply an information label with the E.O. Number and details that must be affixed on the vehicle for inspection purposes.

The MSD Atomic EFI system is designed for the do-it-yourself enthusiast and provides the easiest installation and initial setup for any EFI upgrade. For more information, go to AtomicEFI.com or call MSD at (915) 857-5200

You May Also Like

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

Other Posts

PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

Engine Ice’s Ice Water Racing Coolant

Engine Ice’s Ice Water provides a significant reduction in surface tension, moving heat away from the engine fast.