ECOMASTER Series 7000 Modular Parts Washers - Engine Builder Magazine

ECOMASTER Series 7000 Modular Parts Washers

Fountain Industries has introduced its ECOMASTER Series 7000 of modular aqueous parts washing systems for fast and effective parts cleaning for a wide range of industry applications.

EcomasterFountain Industries has introduced its ECOMASTER Series 7000 of modular aqueous parts washing systems for fast and effective parts cleaning for a wide range of industry applications.

Designed to meet user needs at the current time, these aqueous parts washers are designed with unique modular features, easily allowing upgrades to other options at a future time. ECOMASTER line makes the investment into parts cleaning easy with options to change or upgrade to other features in the future. The Series 7000 parts washers are available in three models: a non-heated model, a heated model and a heated model with filtration.

ECOMASTER Non-Heated EM7000 Parts Washer – 440-lb capacity working tray and 26-gallon soaking capacity give the user capacity for thorough large and small component cleaning. With a thermally protected 350 GPH pump, this unit also features flow through brush with adjustable fluid control, an adjustable spigot, skimmer pads to soak oil from the reservoir tank and stainless steel drain screen. Additional features include easy-to-operate fluid controls, heavy duty stand and full lid.

ECOMASTER Heated EM7020 Parts Washer – The EM7020 heated model has all of the features above for the non-heated model and more. It has a premium control system with easily adjustable fluid heat control, low fluid level sensor and drain flap to reduce fluid evaporation.

ECOMASTER Heated EM7040 Parts Washer – The EM7040 “professional” heated model has all ECOMASTER features and even more. This unit also has a filtration system, a grease tray and 10-W water resistant LED light.

“The ECOMASTER modular design allows choosing the model to meet current needs and budget,” reports Steve Hawkins, Vice President of Business Development for Fountain Industries. “When needs change, the ECOMASTER can be easily and quickly upgraded – no need to buy a new system. They are ruggedly built to last for many years and are backed by Fountain Industries 50 years experience designing and manufacturing the highest quality parts cleaning systems.”

For more information: www.fountainindustries.com

You May Also Like

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

Other Posts

PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

Engine Ice’s Ice Water Racing Coolant

Engine Ice’s Ice Water provides a significant reduction in surface tension, moving heat away from the engine fast.